CS Paper Radar

Transferring local rib responses to new component geometries in sheet forming with a graph-based Transformer

Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li

cs.LG ·submitted 2026-11-06 16:15 UTC · v1

Abstract

Sheet metal components often consist of a global geometry, such as the corner radii and forming depth of a corner component, and local features added to it. During forming, both affect material flow. A surrogate learning all their combinations may need large training data. However, the same local feature type is often used on many global geometries. This study therefore partly decouples local features from the global geometry. The local-feature effect is first learned on one global geometry, needing fewer simulations than learning all combinations, then transferred to other global geometries via transfer learning, which can need fewer target simulations than training from scratch. A baseline-conditioned residual surrogate, R-BiLoGo, is proposed for ribs on the side walls of hot-stamped corner components. Its inputs are the baseline response and the geometric perturbation introduced by the ribs. Its outputs are the changes in displacement and thinning from the baseline. R-BiLoGo gave lower errors than a hierarchical graph-based model and a Transolver-based model on the source geometry, and on two of three selected target geometries after transfer. Across the 22 target geometries, transfer learning with 20 target simulations gave errors similar to or lower than training from scratch with 80 target simulations for about half of the targets. With the same 80 target simulations, transfer learning reduced errors for 95% of targets. The effect of the global geometry on transfer was studied with four parameter-free geometric descriptors and controlled variations across 4 corner subclasses. The benefit of transfer decreased with increasing surface distance and high-curvature change between source and target, and for targets shallower than the source. These trends were also seen in other corner types with a different magnitude.

Closest papers

Nearest neighbours by meaning across the whole index.

BiLoGo: Reducing the smoothing of localised responses in Transformer-based neural operators for sheet forming

cs.LG ·2026-11-06 ·Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li
similarity 0.69
Abstract

Trial-and-error FE simulation of sheet forming could be computationally expensive, neural-network-based learned simulators are used to accelerate design. These simulators should accurately capture localised responses, such as thinning around sharp radii or near ribs, which determine formability. Transformer-based neural operators propagate information efficiently across the mesh but tend to smooth such localised responses. This study develops BiLoGo, a Bipartite Local-Global learned simulator with an FE-guided design that connects local node-element message passing with a Transformer-based neural operator for long-range information exchange. BiLoGo has three modules: a bidirectional node-element GraphSAGE model that learns nodal-elemental coupling on a bipartite graph and predicts each quantity on its native FE entity without interpolation; a dual-stream Transformer-based neural operator that processes blank deformation and tool contact with separate token sets, preventing localised contact information from being averaged with the whole-blank state; and a fusion and element update module that combines global and local features via gated residual fusion and updates element features conditioned on element-node kinematics. Evaluated on a dome-shaped cold forming case and two corner-shaped hot stamping cases (one with ribs), BiLoGo achieves the lowest positional and threshold-based thinning errors on all three cases compared with single-level and hierarchical graph-based models and Transformer-based neural operators. Near the ribs, the smoothing index of predicted thinning increases from 0.41-0.56 for Transformer-based neural operators to 0.94 for BiLoGo-U. Compared with the hierarchical graph network CAtt-BiUGNN, BiLoGo-T reduces mean positional error by 15.5% on the Corner case and BiLoGo-U by 8.3% on the Corner+Rib case, with 66-69% less training memory.

0.52

Learn the Solid, Not the File: Canonical Inputs for Neural Networks on CAD Boundary Representations

cs.CV cs.AIcs.CG ·2026-09-10 ·Heinrich Jiang, Hager Yasser Mohamed, Alexander Hitt, Valeriia Lomakina, Henning Jiang +1 more
similarity 0.61
Abstract

Boundary representation (B-rep) is the standard format used by modern CAD systems for parametric 3D models. It turns out, the exact same solid can be represented by different B-reps: for example, two engineers using different operations, a geometry kernel rebuilding the file, and an export setting repartitioning faces will lead to different B-reps even though the underlying solid remains the same. We show that existing B-rep encoders are not robust to variation in the B-rep with the same solid on perturbations applied to standard benchmarks, naturally occurring variations inherent to CAD software, and differences in how designers model the same part via a human dataset we created in FreeCAD. The performance of popular B-rep encoders often collapses catastrophically. We propose the canonical region graph, an input representation whose nodes, features and coordinate frame are derived from the solid itself and show theoretical invariance guarantees on repartitioning and rigid motions. It matches the strongest baseline on standard benchmarks, and is stable under every perturbation we test.

0.34

STAMP: Manufacturing-Informed Generative Design and Shape Optimization of Sheet Panels

cs.LG ·2026-11-13 ·Jihoon Kim, Jun Hyeok Song, Wonho Ha, Namwoo Kang
similarity 0.60
Abstract · 25 pages, 11 figures, 7 tables, including supplementary material

Generative design of formed sheet panels must preserve geometric manufacturing conditions while exploring layouts and improving performance. STAMP embeds these conditions directly in the shape representation. Each panel is described by its material layout and a reference surface with one height at each occupied position in a plane perpendicular to the drawing direction. Nominal thickness is prescribed along the normal. The representation allows curved surfaces, ribs, and openings. It excludes reference-surface undercuts and keeps nominal thickness fixed without manufacturing penalty terms. Because these conditions belong to the representation, every generated and optimized panel satisfies them regardless of training-set size. Boundary-conditioned diffusion generates alternative layouts, and predictor gradients guide a surface optimization that retains outlines, openings, and designated fixed regions. We demonstrate STAMP on automotive hood inner panels using CarHoods10k. With a comparable number of stored values, depth maps reconstruct surfaces more accurately than point-cloud and voxel baselines. From only five training designs, one of three training runs yields novel and varied layouts. A generator trained on 500 designs, 6.5% of the training set, already reaches the layout variety of the full-data model. Across 11 held-out design families, predictor-based selection among existing dataset designs yields an average gap of 0.18 mm to the best available FEA deformation, versus an expected 1.59 mm for random selection. It does better than random selection in all 11 families. At a 10% depth-change bound, a network not used in the search predicts an average deformation reduction of 24.8% for six generated and existing panels, with a 3.2% average mass increase computed from geometry. Engineers can thus explore and optimize panels within this manufacturing-informed design space.

0.18

Learning structural response operators across varying geometries and loads with global and local geometry encoding

cs.CE ·2026-11-01 ·Xin Liu, Wuwen Yao
benchmark similarity 0.58
Abstract · 27 pages, 20 figures, 7 tables; v2: Removed the template footer; scientific content unchanged

Predicting mechanical responses across complex geometries and varying loading conditions is central to simulation-driven engineering, yet capturing the influence of geometric boundaries remains challenging for data-driven models. Here we propose a Load- and Geometry-adaptive Deep Operator Network (LG-DON) that integrates global geometric representations with local, boundary-aware information to predict structural responses. By distinguishing distances to different boundary categories rather than relying on the nearest boundary alone, the framework captures spatially varying geometric influences that conventional distance-based representations may overlook. Across benchmark problems involving diverse non-convex geometries, LG-DON reduces the mean relative L2 error from 12.17% for a modified MIONet baseline to 7.41%. Controlled ablation studies further demonstrate the advantages of category-resolved boundary distances and show that combining global and local geometric representations outperforms either representation alone in 15 of 18 evaluated configurations. These findings highlight the value of integrating complementary geometric information for accurate operator learning across complex structural domains.

0.34

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.56
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

LM6-CastBench: A Geometry-Aware Simulation Dataset for Transient Thermal Prediction in LM6 Sand Casting

cs.AI cond-mat.mtrl-sci ·2026-10-31 ·Suhani Kolhatkar, Anand Khandekar
benchmarkdataset similarity 0.55
Abstract

Transient thermal fields during solidification connect casting process conditions and cooling behaviour to the formation of defect-prone regions in aluminum cast ings. Repeatedly solving this thermal problem across geometries and process conditions is computationally expensive, motivating data-driven surrogate models. However, existing machine-learning studies on casting thermal behaviour rely on study-specific simulation databases that do not support reproducible geometry-level benchmarking. We introduce LM6-CastBench, an open simulation dataset for geometry-aware learning of transient thermal fields in LM6 aluminum sand casting, combining three geometry families, ten variants per family, five pouring tempera tures, and three mould temperatures (450 geometry-process cases in total). Each case retains CAD geometry, unstructured mesh connectivity, spatial descriptors, process metadata, and time-resolved nodal temperatures. We benchmark a point wise MLP against a spatially structured U-Net under geometry-level data splits; the U-Net reduces temperature-field errors by a large margin, with the biggest gains on geometries with localized features and abrupt section changes. LM6-CastBench gives researchers a reproducible dataset and benchmark for geometry-aware surro gate modelling of casting thermal behaviour.

0.26

BAT-NO: A Boundary-Condition-Aware Transformer Neural Operator for Crashworthiness Prediction of Vehicle Components

cs.LG ·2026-10-02 ·Haoran Li, Yingxue Zhao, Haosu Zhou, Mustapha Ziane, Pierre Culiere +2 more
similarity 0.55
Abstract

High-fidelity finite-element simulations provide accurate crashworthiness predictions, but their cost limits iterative design exploration. Deep learning surrogates can reduce this cost, but many component-level models are developed under a single prescribed boundary condition, limiting generalisation to boundary variations. This work proposes a Boundary-Condition-Aware Transformer Neural Operator (BAT-NO) for autoregressive prediction of transient displacement fields and scalar crashworthiness responses under variations in geometry and boundary conditions. A B-pillar simulation framework evaluates generalisation across variations in geometry, impact position and velocity, and support stiffness. BAT-NO combines recurrent mesh processing with latent-grid Fourier operator processing. Boundary-condition information is transferred to the latent grid through a hybrid local--global mechanism. Slice-based attention models interactions among physically related regions, while direct boundary-to-grid projection preserves local spatial structure. Across the validation sets for the shape-only, shape-and-loading, and shape-loading-boundary cases, BAT-NO achieves the lowest mean final-step mean nodal Euclidean displacement error among the evaluated baselines. In the most challenging case, it reduces the mean error by 32.6% relative to the second-best model. Hyperparameter tuning reduces the validation error from 0.451 to 0.269 mm, with a comparable error of 0.267 mm on 300 unseen test simulations sampled within the investigated design space. An attention-based scalar decoder jointly predicts six response trajectories with a mean relative error of 2.46%. Most derived crashworthiness indicators have median errors below 3%. These results show that explicit local and global boundary-condition representations improve crashworthiness prediction over expanded component-level design spaces.

0.21

Retargeting Motions to Diverse Skeletons via Learnable Flattening

cs.CV cs.AI ·2026-09-29 ·Kia-Jüng Yang, Fabian H. Sinz, Paweł A. Pierzchlewicz
similarity 0.55
Abstract · 24 pages, 9 figures

Cross-structural motion retargeting aims to transfer motion between different skeletal topologies. Despite recent progress, existing state-of-the-art models struggle with reliability in zero-shot settings, i.e. skeletons with different topologies which were unseen during training, and recent Transformer-based attempts have failed to outperform specialized geometric methods. We bridge this gap with a Transformer Autoencoder that learns a topology- and translation-invariant latent space. Our core contribution is a learnable flattening of skeletal graphs that captures both local dependencies and global structure. Unlike the standard transformer architecture, which adds positional information to token content, we integrate graph-based positional encodings multiplicatively, a design choice that follows directly from our flattening formulation. The resulting model handles diverse skeletal topologies within a single unified architecture and trains in a fully unsupervised manner, requiring no paired retargeting data. Ablation studies show, that the graph encodings, multiplicative formulation, and Transformer backbone is critical for the performance. In zero-shot evaluations, our method reduces global joint position error by $43-47\%$ over current benchmarks. A user study ($n = 37$), including expert animators, further ranks our approach highest in motion alignment and physical plausibility ($p < 0.05$). These results demonstrate that our model design is key to making transformer architectures effective for motion retargeting, outperforming existing approaches.

0.18