CS Paper Radar

BiLoGo: Reducing the smoothing of localised responses in Transformer-based neural operators for sheet forming

Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li

cs.LG ·submitted 2026-11-06 15:43 UTC · v1

Abstract

Trial-and-error FE simulation of sheet forming could be computationally expensive, neural-network-based learned simulators are used to accelerate design. These simulators should accurately capture localised responses, such as thinning around sharp radii or near ribs, which determine formability. Transformer-based neural operators propagate information efficiently across the mesh but tend to smooth such localised responses. This study develops BiLoGo, a Bipartite Local-Global learned simulator with an FE-guided design that connects local node-element message passing with a Transformer-based neural operator for long-range information exchange. BiLoGo has three modules: a bidirectional node-element GraphSAGE model that learns nodal-elemental coupling on a bipartite graph and predicts each quantity on its native FE entity without interpolation; a dual-stream Transformer-based neural operator that processes blank deformation and tool contact with separate token sets, preventing localised contact information from being averaged with the whole-blank state; and a fusion and element update module that combines global and local features via gated residual fusion and updates element features conditioned on element-node kinematics. Evaluated on a dome-shaped cold forming case and two corner-shaped hot stamping cases (one with ribs), BiLoGo achieves the lowest positional and threshold-based thinning errors on all three cases compared with single-level and hierarchical graph-based models and Transformer-based neural operators. Near the ribs, the smoothing index of predicted thinning increases from 0.41-0.56 for Transformer-based neural operators to 0.94 for BiLoGo-U. Compared with the hierarchical graph network CAtt-BiUGNN, BiLoGo-T reduces mean positional error by 15.5% on the Corner case and BiLoGo-U by 8.3% on the Corner+Rib case, with 66-69% less training memory.

Closest papers

Nearest neighbours by meaning across the whole index.

Transferring local rib responses to new component geometries in sheet forming with a graph-based Transformer

cs.LG ·2026-11-06 ·Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li
similarity 0.69
Abstract

Sheet metal components often consist of a global geometry, such as the corner radii and forming depth of a corner component, and local features added to it. During forming, both affect material flow. A surrogate learning all their combinations may need large training data. However, the same local feature type is often used on many global geometries. This study therefore partly decouples local features from the global geometry. The local-feature effect is first learned on one global geometry, needing fewer simulations than learning all combinations, then transferred to other global geometries via transfer learning, which can need fewer target simulations than training from scratch. A baseline-conditioned residual surrogate, R-BiLoGo, is proposed for ribs on the side walls of hot-stamped corner components. Its inputs are the baseline response and the geometric perturbation introduced by the ribs. Its outputs are the changes in displacement and thinning from the baseline. R-BiLoGo gave lower errors than a hierarchical graph-based model and a Transolver-based model on the source geometry, and on two of three selected target geometries after transfer. Across the 22 target geometries, transfer learning with 20 target simulations gave errors similar to or lower than training from scratch with 80 target simulations for about half of the targets. With the same 80 target simulations, transfer learning reduced errors for 95% of targets. The effect of the global geometry on transfer was studied with four parameter-free geometric descriptors and controlled variations across 4 corner subclasses. The benefit of transfer decreased with increasing surface distance and high-curvature change between source and target, and for targets shallower than the source. These trends were also seen in other corner types with a different magnitude.

0.28

HI-MeshGraphNets: Efficient and Accurate Mesh-based Physics Learning with Hierarchical Multi-scale Graph Neural Networks

cs.LG ·2026-08-13 ·SiHun Lee, Dong-Hyuk Park, Taesoo Bang, Seung-Hoon Kang
similarity 0.60
Abstract

Machine-learned physical surrogate models have become promising alternatives to mesh-based numerical solvers. Among them, graph neural networks (GNNs) are well suited for representing simulation meshes and learning nodal state evolution through message passing. However, conventional flat message passing becomes inefficient on large, high-fidelity meshes because information propagates only one hop per layer, requiring deep processors for long-range interactions and increasing computational cost, memory usage, and the risk of over-smoothing. To address this limitation, we propose Hierarchical Interpolating MeshGraphNets (HI-MGN), a multiscale extension of MeshGraphNets for efficient long-range communication on unstructured meshes. HI-MGN replaces the flat processor with a hierarchical multiscale processor that coarsens graphs using farthest-point sampling and Voronoi partitioning while preserving the original mesh topology. Message passing on coarse graphs enables information to travel over larger geometric distances with fewer layers, and a learned graph interpolation network reconstructs fine-resolution features. Across three structural and fluid benchmarks, HI-MGN achieves improved accuracy compared with MeshGraphNets and the Bi-Stride Multi-Scale GNN while reducing training time and peak memory usage. The results show that topology-aware hierarchical message passing and learned coarse-to-fine interpolation provide an effective and practical framework for scalable mesh-based physics surrogate modeling.

0.04

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.56
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

A variational physics-informed graph neural network for heterogeneous solid mechanics

cs.LG math.NA ·2026-09-10 ·Aashay Rajan Yadav, Amiya Prakash Das, Ratna Kumar Annabattula
similarity 0.55
Abstract

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($σ_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

0.28

Where to Compute and How to Interact: Operator-Readable Adaptation with Gauge-Aware Transport

cs.LG ·2026-09-14 ·Zixuan Shen, Quanxu Wan, Bingchuan Wang, Zhi Wang, Biao Luo
similarity 0.54
Abstract

Adaptive meshes enable neural operators for partial differential equations (PDEs) to allocate spatial samples and computation according to local physical structures. Existing approaches, however, mainly address where to compute, with less attention to how information should interact after node relocation. Mesh adaptation changes local sampling scales, neighborhood structures, and geometric contexts, so representations formed at different nodes may not be directly comparable. Direct aggregation can therefore entangle physical variation with discretization-induced representation variation. Because allocation and interaction are jointly optimized through the same output objective, their individual roles are also difficult to distinguish from final errors alone. We introduce operator readability, requiring an adaptive operator to account for and test why computation is allocated to particular locations and how representations interact under the resulting nonuniform discretization. Based on this principle, we propose the Gauge-Aware Adaptive Mesh Neural Operator (GA-AMNO). Physics-informed adaptive allocation answers where to compute, while geometry-conditioned low-rank Gauge transport maps source features into target representation contexts before aggregation, answering how to interact. This makes mesh-to-solver information exchange inspectable and intervenable. We establish sufficient conditions for representation-consistent aggregation and analyze approximate transport errors and continuity under topology-preserving mesh deformations. Experiments on five PDE benchmarks demonstrate improved predictive accuracy, while controlled interventions and geometric-mismatch analyses verify the roles of allocation and interaction and show that Gauge transport improves cross-discretization representation compatibility under strong geometric mismatch.

0.25

Retargeting Motions to Diverse Skeletons via Learnable Flattening

cs.CV cs.AI ·2026-09-29 ·Kia-Jüng Yang, Fabian H. Sinz, Paweł A. Pierzchlewicz
similarity 0.53
Abstract · 24 pages, 9 figures

Cross-structural motion retargeting aims to transfer motion between different skeletal topologies. Despite recent progress, existing state-of-the-art models struggle with reliability in zero-shot settings, i.e. skeletons with different topologies which were unseen during training, and recent Transformer-based attempts have failed to outperform specialized geometric methods. We bridge this gap with a Transformer Autoencoder that learns a topology- and translation-invariant latent space. Our core contribution is a learnable flattening of skeletal graphs that captures both local dependencies and global structure. Unlike the standard transformer architecture, which adds positional information to token content, we integrate graph-based positional encodings multiplicatively, a design choice that follows directly from our flattening formulation. The resulting model handles diverse skeletal topologies within a single unified architecture and trains in a fully unsupervised manner, requiring no paired retargeting data. Ablation studies show, that the graph encodings, multiplicative formulation, and Transformer backbone is critical for the performance. In zero-shot evaluations, our method reduces global joint position error by $43-47\%$ over current benchmarks. A user study ($n = 37$), including expert animators, further ranks our approach highest in motion alignment and physical plausibility ($p < 0.05$). These results demonstrate that our model design is key to making transformer architectures effective for motion retargeting, outperforming existing approaches.

0.18

FEA solver integration of a composite World Model with a Spiking Neural Network memory Block for computationally efficient modelling of defects and variabilities

cs.LG ·2026-11-19 ·Bassam El Said, Adam Sobey
similarity 0.53
Abstract

Each fibre-reinforced composite structure has a unique material architecture. The manufacturing methods used and the presence of defects lead to local variations which require material-scale models that can resolve the response in real time at every location in the structure. Concurrent multi-scale schemes provide this capability, but at a prohibitive computational cost for large structures as the number of integration points and time increments scales with size. Surrogates have been studied extensively as replacements for material-scale models to mitigate these computational limitations. A surrogate must represent an arbitrary local architecture including defects, track the irreversible material state over an unknown number of increments, remain stable when driven recursively by its own predictions, and fit within the memory available at every integration point. Here, a Composites World Model based on a Multi-Modal Spiking Transformer architecture is designed to meet these requirements. The proposed architecture combines a material encoder, a Spiking Neural Network memory block that tracks the long-term internal state of the material, and transformer blocks that learn the short-term applied strain state. The system is trained in three stages: material architecture encoding, base training on short time windows, and recursive fine-tuning with scheduled sampling to suppress cumulative error drift. The trained model is disassembled at inference and coupled to a non-linear FE solver, enabling structural scale simulation of composites containing embedded defects. Benchmarks against experimental results for IM7/8552 laminates under tension, compression and transverse shear, for pristine and wrinkled composites, show that the SNN memory block successfully tracks the material internal state and results in prediction errors between 0.4% and 4.8%.

0.25

Learnable Splines for Unstructured Neural Operators

cs.AI cs.LGphysics.comp-ph ·2026-10-15 ·Vignesh Gopakumar, Zhuoyuan Wang, Ander Gray, Valentin Duruisseaux, Josh Williams +10 more
similarity 0.53
Abstract

Neural operators approximate solution operators of partial differential equations at a fraction of the cost of numerical solvers. Efficient grid-based architectures such as the Fourier neural operator (FNO) assume uniform rectangular grids, whereas engineering simulations use large, irregular, and locally refined meshes. We introduce L-SplineFNO, a memory-efficient neural operator that couples an FNO backbone with a sparse, learnable tensor-product B-spline transfer between unstructured meshes and a latent Cartesian grid. A local normalised scatter avoids the geometry-dependent solve of analytic spline transformation while preserving compact support, partition of unity, and spline smoothness by construction. The neural operator, conditioned on global design and operating parameters, learns the mapping of geometry to the field solution. Across six three-dimensional engineering benchmarks, L-SplineFNO achieves strong predictive accuracy while requiring substantially less memory and compute than baseline operators, scaling to 26.6 million nodes in training and 46 million in inference on a single A100 GPU. It also supports zero-shot super-resolution and efficient closed-form spatial derivatives. Uniquely, the analytic spline decoder yields rigorous prediction bounds over continuous space and uncertain parameters, via Bernstein convex hulls and Taylor models, demonstrated on a 29.2-million-node MAST-U tokamak model.

0.09