CS Paper Radar

A variational physics-informed graph neural network for heterogeneous solid mechanics

Aashay Rajan Yadav, Amiya Prakash Das, Ratna Kumar Annabattula

cs.LG math.NA ·submitted 2026-09-10 02:02 UTC · v1

Abstract

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($σ_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

Closest papers

Nearest neighbours by meaning across the whole index.

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.68
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

A Systematic Analysis of Automatic Differentiation versus Discretization-based Constraints for Physics-Informed PDE Solvers

cs.LG math.NAphysics.flu-dyn ·2026-09-07 ·Xing Guo, Hongwei Tang, Zewei Meng, Yidong Zhang, Shaoqiu Xiao +1 more
code/data similarity 0.65
Abstract

Physics-informed neural networks (PINNs) represent a growing frontier in using artificial intelligence to solve partial differential equations (PDEs). Automatic differentiation (AD) plays a central role in this paradigm, which is mesh-free and replaces traditional iterative solvers with gradient-based optimization in continuous space. However, the inherent limitations of AD, particularly in handling higher-order derivatives and discontinuous solutions, pose significant challenges for complex problems. This has motivated a growing number of researchers to explore discretization-based constraints as an alternative path. Yet, the respective applicability of these two paradigms remains largely unexplored. In this work, we conduct systematic experiments across a wide spectrum of problems, from simple linear Poisson to high-Mach hypersonic flows with strong discontinuities. Through a rigorous decomposition of approximation, optimization, and truncation errors, we systematically elucidate the fundamental trade-offs and error-governing mechanisms of both paradigms, as well as two representative network architectures: multi-layer perceptron (MLP) and graph neural network (GNN). Our results reveal a consistent trend: as nonlinearity strengthens, the accuracy advantage of discretization-based constraints becomes increasingly pronounced, with smaller optimization errors compensating for the truncation errors. Moreover, the more complex the nonlinearity and boundary conditions, the greater the advantage of GNN over MLP. These insights offer a robust practical guideline for configuring neural PDE solvers in demanding engineering applications. Our source data and code are available at https://github.com/guoxing0809/neuropde_analysis.

0.29

Variational Functional Neural Networks (vfNN)

cs.LG cond-mat.soft ·2026-11-02 ·Chinmay Katke, C. Nadir Kaplan
benchmark similarity 0.64
Abstract · 11 pages, 4 figures. Version submitted for peer review

We present a variational functional neural network (vfNN) algorithm that optimizes physically motivated continuum functionals in integral form (e.g., Lagrangian, Hamiltonian, or free energy) to find the states of a system. That way, vfNN bypasses solving the equations of motion (a.k.a. the Euler-Lagrange equations), which are in the form of differential equations. To this end, our approach is fundamentally different from conventional physics-informed neural networks (PINN) that solve differential equations by minimizing a phenomenological loss function involving higher order derivatives and ad hoc weight factors. In contrast, vfNN merely evaluates lower order derivatives of the generating functional and replaces the weight factors with rigorous physical scales. This also fundamentally changes the loss landscape, and the desired solutions may become unstable. For this emergent nonconvex optimization problem, we develop a quasi-Newton optimization algorithm with simulated annealing that converges to the solutions of the corresponding Euler-Lagrange equations of the functional regardless of their stability properties. Our simulations using vfNN give accurate results for benchmark systems governed by linear or nonlinear ordinary differential equations.

0.28

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.64
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.63
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

GAC-PINN: Geometry-Adaptive and Constraint-Enhanced Physics-Informed Neural Networks

cs.AI math.NA ·2026-09-28 ·Yanxin Zhang, Yong Zhang, Houbiao Li
similarity 0.63
Abstract · 21 pages, 9 figures, 5 Tables

For systems with steep gradients, sharp interfaces, or severe spatio-temporal coupling, Physics-informed neural networks (PINNs) suffer from spectral bias, geometric inflexibility, and boundary constraint conflicts, which undermine accuracy and convergence. To overcome these issues, we propose a geometry-adaptive and constraint-enhanced PINN (GAC-PINN). The framework comprises four components: a gradient-driven adaptive grid mapping (AGM) for diffeomorphic point concentration with Jacobian regularization, an adaptive bandwidth hard-constraint ansatz with spatially-varying boundary transition widths, a Gaussian Fourier feature mapping as a spectral preconditioner to further enhance high-wavenumber representation, and an operator-aware router that automatically selects the appropriate hard-constraint construction based on whether the governing PDE contains temporal derivatives. An AGM callback mechanism and a three-stage training strategy ensure stable coordination. Benchmarks including the viscous Burgers equation, a sharp-peaked 2D Poisson problem, and the Allen-Cahn phase-transition equation show that GAC-PINN attains relative (L^2) errors of ((1.747\pm 0.450)\times 10^{-4}), ((2.868\pm 0.947)\times 10^{-5}), and ((1.756 \pm 0.712)\times 10^{-3}), respectively, consistently outperforming the baselines. Ablation studies further reveal that AGM alone yields a substantially lower error than residual-based adaptive refinement (RAR), while RAR becomes beneficial only when combined with FFM, demonstrating a context-dependent module interaction. Convergence analysis verifies rapid error reduction and saturation with increasing resolution, establishing a practical adaptive framework for high-fidelity simulation of problems with localized sharp features in applied mechanics and computational physics.

0.23

Adaptive Physics-Informed Neural Networks for the Blasius Boundary-Layer Problem

cs.LG physics.flu-dyn ·2026-08-28 ·Mehari Fentahun Endalew, Xiaoming John Zhang
benchmark similarity 0.62
Abstract · 25 pages

Physics-informed neural networks (PINNs) provide a mesh-free approach for solving differential equations, but their performance can depend strongly on loss weighting, collocation placement, and optimization strategy. This study develops an adaptive PINN framework for the Blasius boundary-layer equation using gradient-norm-based adaptive loss weighting, nonuniform and residual-based collocation, and sequential Adam--L-BFGS optimization. In the representative run using the architecture $[1,100,100,1]$, the model predicts $f''(0)=0.3320762918$, compared with the high-accuracy benchmark $0.332057336215$, giving an absolute error of $1.896\times10^{-5}$. The final weighted loss is $6.789\times10^{-8}$, and the predicted stream-function, velocity, and shear profiles agree closely with an independent numerical boundary-value solution. A separate full-training architecture study shows that the two-hidden-layer model achieves the smallest wall-shear error among the four tested architectures, $1.629\times10^{-6}$, whereas the deepest network attains the smallest weighted objective but a substantially larger wall-shear error. Compared with the previously reported PINN value $f''(0)=0.33165$, the representative run reduces the wall-shear error by approximately a factor of $21.5$. The results show that the combined adaptive training framework can achieve high accuracy for the Blasius problem and that weighted loss alone is insufficient for identifying the most physically accurate PINN. Because the adaptive components are applied jointly, their individual contributions cannot be isolated from the present results and would require a controlled ablation study for separate assessment.

0.22

Physics-Informed Error Field Learning: A Post-Training Optimization Framework for Physics-Informed Neural Networks

cs.LG ·2026-08-25 ·Jiuyun Sun, Yong Zhang
similarity 0.61
Abstract

Physics-Informed Neural Networks (PINNs) have emerged as an important class of numerical methods for solving partial differential equations (PDEs). However, during the late-stage optimization process, further parameter updates often yield diminishing accuracy improvements while increasing computational costs. To address this issue, this paper proposes a Physics-Informed Error Field Learning (PIEFL) framework for PINNs. Unlike conventional approaches that continuously approximate the solution field using a single network, PIEFL introduces an auxiliary error network after the primary network achieves satisfactory accuracy and shifts the learning objective from the solution field to the error field. By deriving error control equations under physical constraints, the error network learns the discrepancy between the current approximation and the exact solution, and the learned error correction is combined with the primary prediction to improve solution accuracy. The proposed framework avoids continuous optimization of the entire solution space and focuses computational resources on correcting existing prediction errors. Moreover, PIEFL requires no modification to the primary network architecture, making it compatible with existing PINN models and applicable as a general post-training optimization strategy. Numerical experiments on representative PDEs demonstrate that PIEFL achieves higher solution accuracy under the same computational budget, validating its effectiveness in improving the performance of PINNs.

0.19