CS Paper Radar

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

Kangzheng Liu, Uday Kumar Punna, Leixin Ma

cs.LG ·submitted 2026-09-14 04:06 UTC · v1

Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

Closest papers

Nearest neighbours by meaning across the whole index.

A variational physics-informed graph neural network for heterogeneous solid mechanics

cs.LG math.NA ·2026-09-10 ·Aashay Rajan Yadav, Amiya Prakash Das, Ratna Kumar Annabattula
similarity 0.64
Abstract

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($σ_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

0.28

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.62
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.61
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

TopoMamba: A Load-Support Relation-Guided Multi-Directional State-Space Model for Topology Optimization

cs.AI cs.CEcs.LG ·2026-09-27 ·Bin Lou, Yuxuan Cheng, Huaizhi Zong, Junhui Zhang, Bing Xu
similarity 0.60
Abstract

Deep learning has emerged as an efficient alternative for predicting high-performance material distributions in topology optimization. Existing methods struggle to accurately capture load-transfer information, limiting out-of-distribution generalization, while their model architectures often incur high computational costs. To address these challenges, this paper proposes TopoMamba, a topology prediction framework incorporating a load-support relation-guided multi-directional state-space model. Coupling physical fields with load-support relations enables more effective modeling of mechanical dependencies. A load-support relation-guided spatially adaptive fusion mechanism dynamically adjusts multi-directional scan features according to spatial conditions. Mamba is coupled with the solid isotropic material with penalty method to enhance structural mechanical performance while maintaining computational efficiency. Results on two-dimensional topology optimization benchmarks demonstrate that TopoMamba achieves superior topology prediction accuracy, out-of-distribution generalization, and computational efficiency over state-of-the-art models. The proposed load-support physics-guided framework enables efficient optimization of more complex structural systems.

0.29

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.59
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27

PoliVEM: a Python-driven virtual element framework for computational solid mechanics

cs.SE ·2026-09-26 ·Paulo Akira F. Enabe, Rodrigo Provasi
similarity 0.59
Abstract

This work presents PoliVEM, a software framework for the Virtual Element Method (VEM) in computational solid and structural mechanics. A C++17 computational core and a Python interface place one-dimensional beams, two- and three-dimensional elasticity, axisymmetric elasticity, transient diffusion, and finite-strain hyperelasticity in a common implementation. The framework stores vertex, edge, face, and cell degrees of freedom in one hierarchy, constructs the energy, strain, and $L^2$ projections from common polynomial data, and retains the consistency--stabilization split at the element level. The core separates the mesh, material, element, assembler, and solver responsibilities and combines them by composition. A new formulation supplies its projection, discrete form, and stabilization while reusing the mesh representation, degree-of-freedom numbering, boundary-condition treatment, sparse assembly, algebraic solvers, and Python binding pattern. The numerical infrastructure includes polygonal and polyhedral mesh input, higher-order entity numbering, cached projection operators, static condensation, coloured sparse assembly, linear solver selection based on the matrix structure, an incremental Newton method with line search and regularization, and explicit and implicit time integration. Three numerical experiments examine the shared implementation through polynomial reproduction, recovery after static condensation, higher-order degree-of-freedom handling, polygonal and polyhedral meshes, patch tests, stiffness spectra, and comparisons with independent finite element calculations. The results verify the common core for the beam and two- and three-dimensional elasticity formulations. They also identify the scaling of high-order polynomial bases on anisotropic cells and the memory required by sparse direct factorizations as the main limitations of the current implementation.

0.22

A physics-coupled graph neural operator for mid-plane six-component stress tensor field prediction in concrete penetration

cs.LG ·2026-10-12 ·Wenpu Du, Peng Zhou, Yunlong Xia, Sinuo Xin, Congcong Zhang +3 more
similarity 0.58
Abstract

The penetration-resistant design of concrete structures requires the spatiotemporal evolution of the stress field within the target, whereas in design only the strength grade, the geometry and the projectile parameters are known, and the aggregate arrangement is not. Empirical formulae and scalar-output surrogates serve design screening, and mesoscale finite element models resolve the aggregate-scale response, but one solution cannot cover random aggregate samples at scale, and no framework links mesoscale heterogeneity to field-level prediction. A physics-coupled graph neural operator (PC-GNO) is proposed, which learns in function space the evolution of the mid-plane six-component stress tensor field. The training data are generated by full-scale, aggregate-resolved finite element models and comprise 359 cases at the impact velocities of 100, 135 and 165 m/s, corresponding to compressive strengths of 14, 23 and 48 MPa; the data source is verified by laboratory measurements. The coupling strength of message passing is constructed from the impedance contrast across the material interface, and the update is constrained by spectral normalization. Under the single-step primary setting, the mean accuracy of the three levels is 80.16% (91.45%, 77.80% and 71.22%), i.e. 27.81, 42.46 and 34.16 percentage points above the preceding-frame field of the same window; with 20 664 parameters it exceeds the 87.9% of the best Fourier neural operator configuration (about 812 times as many parameters) and the 71.0% of the closed-form linear regression. The output is the complete six-component tensor field rather than a fixed engineering quantity, so that strength criteria and energy indicators follow from one set of weights. For field-level response prediction in concrete penetration, this result provides a data-driven route, with conditions of applicability defined by the training and the evaluation.

0.06

Element-Wise Femoral Stress Prediction: A Hybrid Graph Neural Network Surrogate for Finite Element Analysis

cs.LG ·2026-11-18 ·Sikha O K, Abdollah Moslemi, Elham Alizadeh, Ludovic Humbert, Miguel A. Gonzalez Ballester +1 more
code/data similarity 0.58
Abstract · This paper is submitted to Frontiers in Artificial Intelligence

Hip fractures represent a significant clinical challenge because they cause excess disability and mortality, and have a growing incidence in aging populations, as bone fragility increases. Although finite element analysis (FEA) provides biomechanical assessment of femoral strength, its clinical applicability is mainly limited by high computational cost. Conventional machine learning (ML) approaches have been explored as surrogate models for FEA; predictions are fast but fail to capture the spatial and topological structure of finite element meshes. To address these limitations, this study proposes a hybrid Graph Neural Network (GNN)-based framework for femoral stress prediction using graph-structured finite element modeling (FEM) data. The proposed GCN-SAGE-Residual architecture combines graph convolution, neighborhood aggregation, and residual learning to model spatial dependencies and stress propagation across mesh elements. We systematically evaluated 14 models in a primary comparison, spanning classical ML methods and baseline GNN architectures, complemented by a targeted architectural ablation that isolates the contribution of each component of the proposed design. Evaluation results demonstrate that the proposed hybrid architecture achieves the strongest predictive performance among all evaluated models. The proposed hybrid model achieves the best performance with an R^2 score of 0.8022 and mean absolute error of 2.879 MPa, highlighting the importance of incorporating mesh topology in biomechanical prediction tasks. The proposed framework provides a scalable and computationally efficient alternative for FEM-based orthopedic analyses and fracture risk assessment. The code is publicly available on GitHub.

0.34