CS Paper Radar

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha

cs.CE math.NAmath.OCstat.COstat.ME ·submitted 2026-08-16 22:51 UTC · v1
published

Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

Journal ref
J Braz. Soc. Mech. Sci. Eng. 48, 665 (2026)
DOI
10.1007/s40430-026-06564-7

Closest papers

Nearest neighbours by meaning across the whole index.

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.59
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.58
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.57
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.56
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.29

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

cs.CE cs.MS ·2026-11-09 ·Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro
code/data similarity 0.56
Abstract · 18 pages, 8 figures. Online Resource 1 is available as an ancillary file. Code and data: https://doi.org/10.5281/zenodo.24050327. Submitted …

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.

0.49

Topology optimization with buckling constraints: Adaptive eigenvalue aggregation and modality identification

cs.CE ·2026-09-17 ·Badvelu Pranay Prabha, Prabhat Kumar
similarity 0.55
Abstract · 33 pages

This paper presents novel approaches to tackle two key challenges in topology optimization problems with buckling constraints: determining how many eigenvalues to aggregate and identifying the eigenvalue modality at the optimal design. We demonstrate the mathematical inconsistencies that arise when choosing an arbitrary fixed number of eigenvalues for aggregation. Specifically, if the multiplicity of the critical eigenvalues is smaller than the chosen subset size, coalescence with higher-order eigenvalues can occur. Neglecting these during aggregation causes incorrect sensitivities, while simply increasing the preselected eigenvalue count unnecessarily raises computational costs. To resolve this issue, we propose an approach that dynamically determines the exact number of eigenvalues required at each optimization iteration. The proposed approach reduces computation time significantly while maintaining competitive performance relative to the conventional method across the numerical experiments presented. Additionally, accurately predicting modality at the optimal point is crucial for understanding the buckled mode shapes of optimized designs. A new optimization formulation is proposed using the difference between eigenvalues to capture the true eigenvalue modality. This formulation is first validated on a classical 1D clamped column, successfully predicting both the bimodal solution and the optimal eigenvectors. The approach demonstrates that the optimal solutions for the wall reinforcement and shear-loaded hinged plate problems for the given set of parameters are trimodal and tetramodal, respectively.

0.27

Efficient Robust Optimization via an Adaptive Mono-Level Gaussian Process Surrogate

cs.CE ·2026-11-17 ·Julius Schultz, Mustafa Essou, Ulrich Römer
benchmark similarity 0.54
Abstract

Optimization under uncertainty seeks designs that perform robustly despite varying operating conditions or uncertain model parameters. However, identifying such designs typically requires solving an optimization problem with a nested uncertainty analysis, resulting in a high computational burden. Surrogate models can alleviate this burden and enable optimization under uncertainty even with computationally expensive simulation models. This paper proposes a novel surrogate-based approach that reduces the number of costly model evaluations required for robust optimization. The approach adopts a mono-level strategy, in which a single Gaussian process surrogate is constructed and adaptively refined for both optimization and uncertainty analysis. Refinement in the design space is guided by a sampling-based uncertainty indicator that propagates the surrogate's epistemic uncertainty to the robustness measure. Efficient uncertainty estimation is crucial for the scalability of the algorithm and achieved through pathwise sampling combined with a weight-space representation of the Gaussian process. The proposed approach is evaluated on several analytical benchmark models and requires fewer model evaluations than a state-of-the-art bi-level surrogate approach while achieving comparable solution accuracy. Once trained, the mono-level surrogate can be reused to optimize different robustness measures at reduced cost. Moreover, the approach is successfully applied to a structural optimization problem with constraints and design variable uncertainty.

0.09

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.54
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30