CS Paper Radar

Topology optimization with buckling constraints: Adaptive eigenvalue aggregation and modality identification

Badvelu Pranay Prabha, Prabhat Kumar

cs.CE ·submitted 2026-09-17 02:31 UTC · v1

Abstract

This paper presents novel approaches to tackle two key challenges in topology optimization problems with buckling constraints: determining how many eigenvalues to aggregate and identifying the eigenvalue modality at the optimal design. We demonstrate the mathematical inconsistencies that arise when choosing an arbitrary fixed number of eigenvalues for aggregation. Specifically, if the multiplicity of the critical eigenvalues is smaller than the chosen subset size, coalescence with higher-order eigenvalues can occur. Neglecting these during aggregation causes incorrect sensitivities, while simply increasing the preselected eigenvalue count unnecessarily raises computational costs. To resolve this issue, we propose an approach that dynamically determines the exact number of eigenvalues required at each optimization iteration. The proposed approach reduces computation time significantly while maintaining competitive performance relative to the conventional method across the numerical experiments presented. Additionally, accurately predicting modality at the optimal point is crucial for understanding the buckled mode shapes of optimized designs. A new optimization formulation is proposed using the difference between eigenvalues to capture the true eigenvalue modality. This formulation is first validated on a classical 1D clamped column, successfully predicting both the bimodal solution and the optimal eigenvectors. The approach demonstrates that the optimal solutions for the wall reinforcement and shear-loaded hinged plate problems for the given set of parameters are trimodal and tetramodal, respectively.

Comment
33 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.64
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

Topology optimization of shipboard components for Navy shock certification via the Dynamic Design Analysis Method

cs.CE ·2026-10-19 ·Miguel A. Aguilo
theory similarity 0.62
Abstract · 32 pages, 17 figures, 12 tables

Shipboard equipment must survive the transient loads of underwater explosions. The U.S. Navy certifies such equipment with the Dynamic Design Analysis Method (DDAM), a modal response analysis driven by Navy shock design spectra. DDAM is well established as a verification tool, yet it is rarely used as a design driver in topology optimization. The design spectrum depends on the modal mass, a non-smooth coupling that classical sensitivity formulations do not address. This paper presents a complete differentiable formulation of the DDAM criterion for gradient-based topology optimization. Eigenvalue sensitivities follow the Fox-Kapoor method, and eigenvector sensitivities follow Nelson's method. The chain rule covers a spectral displacement that depends on both the natural frequency and the modal participation factor. Automatic differentiation assembles the sensitivity, and the engineer can certify components inside the optimization loop rather than after design. Three certification problems on a representative shipboard equipment frame demonstrate the workflow. In each, the optimizer removes 43.2% to 46.1% of the design-domain material and holds the certifying NRL Sum within 0.41% of the Navy allowable. Two companion studies follow. A compliance-optimized frame of nearly the same mass has a 5.2 Hz fundamental, outside the range the certification can qualify. Its nominal response also exceeds the allowable by a factor of 2.75. A lower bound on the mean of the two lowest eigenvalues separates the repeated pair that the demonstrations drive onto the frequency floor. The response then stops oscillating across the acceptance boundary. It ends at most 0.5% above the allowable, at a cost of under two percentage points of volume fraction.

0.32

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.57
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

A Dynamic Aggregation Strategy Enhanced Efficient Global Optimization Algorithm for Solving High-Dimensional Turbomachinery Design Problems

cs.LG cs.CE ·2026-09-13 ·Qineng Wang, Zhendong Guo, Yun Chen, Guangjian Ma, Liming Song +1 more
publishedbenchmark similarity 0.56
Abstract · Author manuscript updated to align core methods and results with the published article; 37 pages, 14 figures, 11 tables

In order to solve the high-dimensional ($d \geq 30$) expensive black-box problems within budget, an efficient global optimization (EGO) algorithm with a dynamic aggregation strategy is proposed, labeled as DA-EGO. Specifically, the DA-EGO decomposes the original high-dimensional design space into a set of low-dimensional subspaces for efficient surrogate-based optimization search, and the optimal solutions of subspaces are combined as an elite point for the global search. Most importantly, the subspaces are not fixed. Instead, the subspace variables are updated in each iteration, according to the variable interaction analyses in the sub- and full-spaces. The perturbation method and the analysis of variance are used to detect variable interactions. To further accelerate the optimization progress, the searching ranges of subspaces are also adaptively adjusted according to the analyses of subspace optimization results of the previous iteration. Tests on 21 benchmark instances, comprising seven functions at 30, 60, and 90 dimensions, show that DA-EGO is effective on separable and partially separable problems under a budget of 1500 function evaluations. Its advantage is case-dependent: on the non-separable shifted Rosenbrock function, GSGA performs better at 60 and 90 dimensions, while the 30-dimensional results are statistically comparable to IKAEA and GSGA. Moreover, the advantage of DA-EGO is also seen in the aerodynamic optimization of a transonic rotor blade with 28 variables as well as the compressor stage optimization with 60 variables. With the above, the effectiveness of the proposed DA-EGO has been well demonstrated.

0.48

A Local-Linearly Convergent Algorithm for Nonconvex Equality-Constrained Optimization

cs.LG math.OCstat.ML ·2026-08-12 ·Frank E. Curtis, Lingjun Guo, Daniel P. Robinson
similarity 0.55
Abstract

For solving nonconvex equality-constrained optimization problems, a recent Gradient-Eigenstep Algorithm by Goyens et al.~is an iteration-efficient approach, based on minimizing Fletcher's augmented Lagrangian function, for finding an approximate second-order stationary point from an arbitrary starting point. In this paper, the analysis of this algorithm is extended, offering a two-fold contribution. First, it is shown that a local-linear rate of convergence can be obtained by this method if it is initiated sufficiently close to a strong second-order stationary point and employs a sufficiently small step-size parameter and sufficiently large penalty parameter. In this case, the algorithm reduces to a gradient descent algorithm applied to minimize Fletcher's augmented Lagrangian. Second, as a particularly useful application of the first result, it is shown that the Gradient-Eigenstep algorithm can be used as an iteration-efficient subproblem solver in the context of a progressive sampling strategy for solving equality-constrained optimization problems when the objective and constraint functions are defined by large sample averages, ultimately offering an algorithm with an improved worst-case sample complexity when compared to an approach that solves a full-sample problem directly.

0.04

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.55
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27

Scalable Stress-Constrained Topology Optimization: A Simultaneous Approach Based on Machine Learning

cs.LG ·2026-10-20 ·Xiangyu Sun, Shirin Hosseinmardi, Ramin Bostanabad
similarity 0.54
Abstract · 41 pages, 19 figures, journal paper

Large-scale topology optimization (TO) remains computationally demanding, especially for stress-constrained problems. To address this challenge, we propose the simultaneous neural topology optimization (SNTO) framework where state, adjoint, and design variables are represented with custom neural networks (NNs) whose parameters are jointly optimized within a single loop using adjoint analysis and automatic differentiation. The loss function combines the design objective, an aggregation of the local stress constraints, and the potential energy functionals. Our NNs have a unique architecture that accelerates convergence while capturing the sharp gradients and boundaries which are critical to stress-constrained TO. To scale to millions of degrees of freedom, we develop a hardware-aware training scheme in which the design domain is partitioned into subdomains distributed across multiple graphics processing units (GPUs). To control peak GPU memory, we further slice each subdomain into smaller regions whose loss gradients are evaluated sequentially and accumulated. Unlike domain decomposition, our partitioning naturally ensures field continuity across subdomains without additional loss terms. We first evaluate SNTO on two-dimensional (2D) stress-constrained benchmarks and compare the results to a conventional finite element-based approach, showing that SNTO produces designs with sharper boundaries and smaller gray areas. We then solve three-dimensional (3D) problems with up to eight million collocation points on eight GPUs. The training time decreases nearly in proportion to the number of GPUs and the peak GPU memory is reduced by increasing the number of sub-slices. Overall, SNTO offers an effective pathway to large-scale stress-constrained TO on limited computational resources.

0.24

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.54
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58