CS Paper Radar

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng

cs.CE ·submitted 2026-10-22 23:34 UTC · v1

Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

Closest papers

Nearest neighbours by meaning across the whole index.

Topology optimization with buckling constraints: Adaptive eigenvalue aggregation and modality identification

cs.CE ·2026-09-17 ·Badvelu Pranay Prabha, Prabhat Kumar
similarity 0.64
Abstract · 33 pages

This paper presents novel approaches to tackle two key challenges in topology optimization problems with buckling constraints: determining how many eigenvalues to aggregate and identifying the eigenvalue modality at the optimal design. We demonstrate the mathematical inconsistencies that arise when choosing an arbitrary fixed number of eigenvalues for aggregation. Specifically, if the multiplicity of the critical eigenvalues is smaller than the chosen subset size, coalescence with higher-order eigenvalues can occur. Neglecting these during aggregation causes incorrect sensitivities, while simply increasing the preselected eigenvalue count unnecessarily raises computational costs. To resolve this issue, we propose an approach that dynamically determines the exact number of eigenvalues required at each optimization iteration. The proposed approach reduces computation time significantly while maintaining competitive performance relative to the conventional method across the numerical experiments presented. Additionally, accurately predicting modality at the optimal point is crucial for understanding the buckled mode shapes of optimized designs. A new optimization formulation is proposed using the difference between eigenvalues to capture the true eigenvalue modality. This formulation is first validated on a classical 1D clamped column, successfully predicting both the bimodal solution and the optimal eigenvectors. The approach demonstrates that the optimal solutions for the wall reinforcement and shear-loaded hinged plate problems for the given set of parameters are trimodal and tetramodal, respectively.

0.27

Multi-Material Topology Optimization of Phononic Crystals for Targeted Elastic Wave Bandgap

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Wenfeng Li, Ting Chen, Xinmai Yang, Candan Tamerler +2 more
similarity 0.60
Abstract

Phononic crystals are periodic elastic structures that exhibit frequency bandgaps within which elastic waves cannot propagate. The formation and width of these bandgaps depend on the spatial distribution of material properties within periodic phononic unit cells. In this work, we propose novel topology optimization formulations to achieve multi-material design of phononic crystals for bandgap optimization at targeted frequencies, where we discover the influence of spatially varying properties of base materials on the band structures that block and permit elastic wave propagation. Specifically, we model wave propagation by Floquet-Bloch theory and solve the resulting eigenvalue problem by the finite element method along the boundary of the irreducible Brillouin zone. We first propose a multivariate weight-based method via a novel interpolation scheme that maps the design variables of an arbitrary number of candidate materials into effective density and stiffness for elastic wave-propagation calculations, where bandgaps arise from the contrast in the stiffness and inertia among material constituents. We then develop two formulations for bandgap optimization. The first formulation maximizes the gap between two adjacent frequency bands using a bound-based approach, where we introduce two auxiliary scalar variables as additional design variables and incorporate them directly into the design objective, yielding a linear, differentiable design objective, with the eigenfrequencies entering the formulation through associated constraints. The second formulation places a bandgap over a user-defined target frequency range through a dynamic band-pairing strategy, where we adaptively identify the relevant pair of adjacent bands amid optimization iterations. Towards the end, we validate the bandgap performance of our designs against the transmission loss spectra computed from COMSOL Multiphysics.

0.35

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.58
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

Neural topology optimization of ship structures under propulsion machinery vibrations

cs.CE cs.AIcs.LGmath.NA+1 ·2026-09-29 ·Shengyu Yan, Muhammad Muztahidul Hakim Zareer, Jasmin Jelovica
similarity 0.57
Abstract · 24 pages, 13 figures, 7 tables

Ship structural vibrations contribute to noise, fatigue, and equipment damage, while dynamic-compliance topology optimization can produce pathological designs near resonance. This study extends neural-reparameterized topology optimization using a convolutional Kolmogorov-Arnold network (KATO) to forced-vibration design with active input power (AIP) as the objective. Applications include a 100 Hz engine-supporting deck panel and an 18 Hz thruster foundation frame. Helmholtz PDE filtering and Heaviside projection control feature sizes and manufacturing tolerance. Across both deck families, all eight optimized layouts reduce AIP relative to size-optimized references and, after finite-depth extrusion, also achieve lower static compliance. For unrestricted, manufacturing-aware, and stress-aware frame variants, KATO matches GCMMA in AIP within 0.5 dB while yielding 22-36x lower static compliance after matched-volume binary re-analysis. In a near-resonant 300 Hz case, both methods reduce initial AIP by more than 32 dB; KATO maintains a connected design, achieves 59x lower binary static compliance, and reduces maximum AIP over 1-500 Hz by 2.7 dB. KATO runs 6.4-10.4x faster than GCMMA for the implemented stress-aware formulations. The results demonstrate neural AIP-driven topology optimization as an efficient approach for designing connected, feature-size-controlled ship structures with improved forced-vibration performance.

0.30

TopoMamba: A Load-Support Relation-Guided Multi-Directional State-Space Model for Topology Optimization

cs.AI cs.CEcs.LG ·2026-09-27 ·Bin Lou, Yuxuan Cheng, Huaizhi Zong, Junhui Zhang, Bing Xu
similarity 0.56
Abstract

Deep learning has emerged as an efficient alternative for predicting high-performance material distributions in topology optimization. Existing methods struggle to accurately capture load-transfer information, limiting out-of-distribution generalization, while their model architectures often incur high computational costs. To address these challenges, this paper proposes TopoMamba, a topology prediction framework incorporating a load-support relation-guided multi-directional state-space model. Coupling physical fields with load-support relations enables more effective modeling of mechanical dependencies. A load-support relation-guided spatially adaptive fusion mechanism dynamically adjusts multi-directional scan features according to spatial conditions. Mamba is coupled with the solid isotropic material with penalty method to enhance structural mechanical performance while maintaining computational efficiency. Results on two-dimensional topology optimization benchmarks demonstrate that TopoMamba achieves superior topology prediction accuracy, out-of-distribution generalization, and computational efficiency over state-of-the-art models. The proposed load-support physics-guided framework enables efficient optimization of more complex structural systems.

0.29

Topology optimization of shipboard components for Navy shock certification via the Dynamic Design Analysis Method

cs.CE ·2026-10-19 ·Miguel A. Aguilo
theory similarity 0.56
Abstract · 32 pages, 17 figures, 12 tables

Shipboard equipment must survive the transient loads of underwater explosions. The U.S. Navy certifies such equipment with the Dynamic Design Analysis Method (DDAM), a modal response analysis driven by Navy shock design spectra. DDAM is well established as a verification tool, yet it is rarely used as a design driver in topology optimization. The design spectrum depends on the modal mass, a non-smooth coupling that classical sensitivity formulations do not address. This paper presents a complete differentiable formulation of the DDAM criterion for gradient-based topology optimization. Eigenvalue sensitivities follow the Fox-Kapoor method, and eigenvector sensitivities follow Nelson's method. The chain rule covers a spectral displacement that depends on both the natural frequency and the modal participation factor. Automatic differentiation assembles the sensitivity, and the engineer can certify components inside the optimization loop rather than after design. Three certification problems on a representative shipboard equipment frame demonstrate the workflow. In each, the optimizer removes 43.2% to 46.1% of the design-domain material and holds the certifying NRL Sum within 0.41% of the Navy allowable. Two companion studies follow. A compliance-optimized frame of nearly the same mass has a 5.2 Hz fundamental, outside the range the certification can qualify. Its nominal response also exceeds the allowable by a factor of 2.75. A lower bound on the mean of the two lowest eigenvalues separates the repeated pair that the demonstrations drive onto the frequency floor. The response then stops oscillating across the acceptance boundary. It ends at most 0.5% above the allowable, at a cost of under two percentage points of volume fraction.

0.32

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.55
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.47

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.54
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27