CS Paper Radar

Neural topology optimization of ship structures under propulsion machinery vibrations

Shengyu Yan, Muhammad Muztahidul Hakim Zareer, Jasmin Jelovica

cs.CE cs.AIcs.LGmath.NAphysics.comp-ph ·submitted 2026-09-29 17:41 UTC · v1

Abstract

Ship structural vibrations contribute to noise, fatigue, and equipment damage, while dynamic-compliance topology optimization can produce pathological designs near resonance. This study extends neural-reparameterized topology optimization using a convolutional Kolmogorov-Arnold network (KATO) to forced-vibration design with active input power (AIP) as the objective. Applications include a 100 Hz engine-supporting deck panel and an 18 Hz thruster foundation frame. Helmholtz PDE filtering and Heaviside projection control feature sizes and manufacturing tolerance. Across both deck families, all eight optimized layouts reduce AIP relative to size-optimized references and, after finite-depth extrusion, also achieve lower static compliance. For unrestricted, manufacturing-aware, and stress-aware frame variants, KATO matches GCMMA in AIP within 0.5 dB while yielding 22-36x lower static compliance after matched-volume binary re-analysis. In a near-resonant 300 Hz case, both methods reduce initial AIP by more than 32 dB; KATO maintains a connected design, achieves 59x lower binary static compliance, and reduces maximum AIP over 1-500 Hz by 2.7 dB. KATO runs 6.4-10.4x faster than GCMMA for the implemented stress-aware formulations. The results demonstrate neural AIP-driven topology optimization as an efficient approach for designing connected, feature-size-controlled ship structures with improved forced-vibration performance.

Comment
24 pages, 13 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Topology optimization of shipboard components for Navy shock certification via the Dynamic Design Analysis Method

cs.CE ·2026-10-19 ·Miguel A. Aguilo
theory similarity 0.59
Abstract · 32 pages, 17 figures, 12 tables

Shipboard equipment must survive the transient loads of underwater explosions. The U.S. Navy certifies such equipment with the Dynamic Design Analysis Method (DDAM), a modal response analysis driven by Navy shock design spectra. DDAM is well established as a verification tool, yet it is rarely used as a design driver in topology optimization. The design spectrum depends on the modal mass, a non-smooth coupling that classical sensitivity formulations do not address. This paper presents a complete differentiable formulation of the DDAM criterion for gradient-based topology optimization. Eigenvalue sensitivities follow the Fox-Kapoor method, and eigenvector sensitivities follow Nelson's method. The chain rule covers a spectral displacement that depends on both the natural frequency and the modal participation factor. Automatic differentiation assembles the sensitivity, and the engineer can certify components inside the optimization loop rather than after design. Three certification problems on a representative shipboard equipment frame demonstrate the workflow. In each, the optimizer removes 43.2% to 46.1% of the design-domain material and holds the certifying NRL Sum within 0.41% of the Navy allowable. Two companion studies follow. A compliance-optimized frame of nearly the same mass has a 5.2 Hz fundamental, outside the range the certification can qualify. Its nominal response also exceeds the allowable by a factor of 2.75. A lower bound on the mean of the two lowest eigenvalues separates the repeated pair that the demonstrations drive onto the frequency floor. The response then stops oscillating across the acceptance boundary. It ends at most 0.5% above the allowable, at a cost of under two percentage points of volume fraction.

0.32

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.57
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.55
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.51
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.51
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.48

TopoMamba: A Load-Support Relation-Guided Multi-Directional State-Space Model for Topology Optimization

cs.AI cs.CEcs.LG ·2026-09-27 ·Bin Lou, Yuxuan Cheng, Huaizhi Zong, Junhui Zhang, Bing Xu
similarity 0.50
Abstract

Deep learning has emerged as an efficient alternative for predicting high-performance material distributions in topology optimization. Existing methods struggle to accurately capture load-transfer information, limiting out-of-distribution generalization, while their model architectures often incur high computational costs. To address these challenges, this paper proposes TopoMamba, a topology prediction framework incorporating a load-support relation-guided multi-directional state-space model. Coupling physical fields with load-support relations enables more effective modeling of mechanical dependencies. A load-support relation-guided spatially adaptive fusion mechanism dynamically adjusts multi-directional scan features according to spatial conditions. Mamba is coupled with the solid isotropic material with penalty method to enhance structural mechanical performance while maintaining computational efficiency. Results on two-dimensional topology optimization benchmarks demonstrate that TopoMamba achieves superior topology prediction accuracy, out-of-distribution generalization, and computational efficiency over state-of-the-art models. The proposed load-support physics-guided framework enables efficient optimization of more complex structural systems.

0.29

Localized Generative Design of Ship Hulls with Diffusion Models and High-Fidelity Assessment

cs.AI math.APmath-ph ·2026-10-09 ·Hadi Keramati, Mohammed A. Hannan, Patrick Kirchen, Sina Tousi, Joonas Riekkinen +2 more
benchmark similarity 0.48
Abstract

Practical ship design requires localized refinement and performance evaluation. This paper presents a reward-directed diffusion framework for localized hull optimization. Parametric masking during dataset generation restricts geometric changes to selected variables, including the bulbous bow and forebody, while preserving full-hull continuity. Surrogate-assisted sequential Monte Carlo sampling targets reduced predicted calm-water resistance, with stability retained through training data and displacement matched during screening. An automated viscous free-surface CFD pipeline, validated against measurements for two benchmark container ships, evaluates a generated variant and GenHull E, a hull refined by a naval architect within the same representation. At matched KRISO Container Ship (KCS) displacement, the generated variant has comparable total resistance at $F_n=0.195$ but 45-50% higher resistance at $F_n=0.250$ and $0.260$, missed by empirical screening. GenHull E achieves 6-8% lower total resistance up to $F_n=0.240$ but higher resistance above $F_n=0.250$ as opposing friction and pressure trends reverse the gains. Aggregating resistance across this crossover can conceal tradeoffs that emerge when friction and pressure components are evaluated separately. The assessment reveals an inability to represent a faired bulbous bow and a reward lacking viscous pressure and stability terms. These findings show how high-fidelity assessment informs improved representations and objectives for physically realizable generative designs.

0.24

KPI-Conditioned Generative Design of Automotive Hood Inner Panels: A Two-Stage Retrieval-Generation Pipeline with Surrogate-Based Performance Estimation

cs.LG ·2026-08-23 ·Sudeep Chavare
similarity 0.48
Abstract · 20 pages, 8 figures, 9 tables

An inner hood panel must meet a deflection target, stay below a stress limit, and hit a mass target. Machine-learned surrogates have made the forward direction, geometry to performance, fast and routine. The inverse direction, producing geometry from a stated requirement, remains largely unaddressed for industrial parts whose design space is organized into discrete topology families rather than a continuous parameterization. This work presents a two-stage pipeline for that inverse problem. A reachability stage determines which topology families can satisfy a given requirement vector. A conditional variational autoencoder then generates point-cloud geometry within a selected family, and a neural-operator surrogate estimates the performance of each candidate. The pipeline is built entirely from public data and freely available compute, and is deployed as an interactive tool. The pipeline works, with qualifications that are reported as primary findings rather than caveats. The surrogate is accurate in aggregate, but its error is comparable to the performance differences it is asked to discriminate, which bounds what can be claimed for any individual generated design. That ratio of surrogate error to within-class signal is argued to be the quantity that determines whether a pipeline of this kind can work at all.

0.58