CS Paper Radar

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

Shengyu Yan, Jasmin Jelovica

cs.CE cs.AIcs.LGmath.NA ·submitted 2026-09-23 01:29 UTC · v1
benchmark

Abstract

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

Comment
32 pages, 24 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Scalable Stress-Constrained Topology Optimization: A Simultaneous Approach Based on Machine Learning

cs.LG ·2026-10-20 ·Xiangyu Sun, Shirin Hosseinmardi, Ramin Bostanabad
similarity 0.68
Abstract · 41 pages, 19 figures, journal paper

Large-scale topology optimization (TO) remains computationally demanding, especially for stress-constrained problems. To address this challenge, we propose the simultaneous neural topology optimization (SNTO) framework where state, adjoint, and design variables are represented with custom neural networks (NNs) whose parameters are jointly optimized within a single loop using adjoint analysis and automatic differentiation. The loss function combines the design objective, an aggregation of the local stress constraints, and the potential energy functionals. Our NNs have a unique architecture that accelerates convergence while capturing the sharp gradients and boundaries which are critical to stress-constrained TO. To scale to millions of degrees of freedom, we develop a hardware-aware training scheme in which the design domain is partitioned into subdomains distributed across multiple graphics processing units (GPUs). To control peak GPU memory, we further slice each subdomain into smaller regions whose loss gradients are evaluated sequentially and accumulated. Unlike domain decomposition, our partitioning naturally ensures field continuity across subdomains without additional loss terms. We first evaluate SNTO on two-dimensional (2D) stress-constrained benchmarks and compare the results to a conventional finite element-based approach, showing that SNTO produces designs with sharper boundaries and smaller gray areas. We then solve three-dimensional (3D) problems with up to eight million collocation points on eight GPUs. The training time decreases nearly in proportion to the number of GPUs and the peak GPU memory is reduced by increasing the number of sub-slices. Overall, SNTO offers an effective pathway to large-scale stress-constrained TO on limited computational resources.

0.24

TopoMamba: A Load-Support Relation-Guided Multi-Directional State-Space Model for Topology Optimization

cs.AI cs.CEcs.LG ·2026-09-27 ·Bin Lou, Yuxuan Cheng, Huaizhi Zong, Junhui Zhang, Bing Xu
similarity 0.63
Abstract

Deep learning has emerged as an efficient alternative for predicting high-performance material distributions in topology optimization. Existing methods struggle to accurately capture load-transfer information, limiting out-of-distribution generalization, while their model architectures often incur high computational costs. To address these challenges, this paper proposes TopoMamba, a topology prediction framework incorporating a load-support relation-guided multi-directional state-space model. Coupling physical fields with load-support relations enables more effective modeling of mechanical dependencies. A load-support relation-guided spatially adaptive fusion mechanism dynamically adjusts multi-directional scan features according to spatial conditions. Mamba is coupled with the solid isotropic material with penalty method to enhance structural mechanical performance while maintaining computational efficiency. Results on two-dimensional topology optimization benchmarks demonstrate that TopoMamba achieves superior topology prediction accuracy, out-of-distribution generalization, and computational efficiency over state-of-the-art models. The proposed load-support physics-guided framework enables efficient optimization of more complex structural systems.

0.29

Bilevel Optimization of Topology and Hyperparameters (BOTH)

cs.LG ·2026-09-18 ·Suryanarayanan Manoj Sanu, Miguel Anibal Bessa, Alejandro Marcos Aragón
similarity 0.63
Abstract · Currently under submission to SMO journal

Topology optimization (TO) represents a significant step towards automating the design process: given a working simulation, TO can produce a viable prototype at the press of a button by differentiating the simulation and iteratively improving the design. In practice, however, TO is riddled with ``magic numbers''---hyperparameters whose tuning significantly affects the outcome. Finding the right values typically requires not only deep problem-specific knowledge but also extensive trial-and-error. While practitioners can use surrogate-assisted hyperparameter optimization as an alternative, this approach requires strictly limiting the number of hyperparameters through careful problem formulation. Here, we propose differentiating TO itself using automatic differentiation. This yields ``hypergradients'' that allow us to tune these hyperparameters in tandem with the primary optimization. We show that evaluating just one or two steps of TO is sufficiently informative and that the method scales favorably to thousands of hyperparameters at an expense comparable to only a few standard TO runs. We demonstrate this approach on stress-constrained and compliance problems, with the latter utilizing a neural parameterization of the density field.

0.49

PDE-State Conditioning for Learned Optimization Using Physics-Informed Neural Networks

cs.LG ·2026-11-18 ·Farzana Yasmin, Ricardo Vilalta
similarity 0.62
Abstract

Physics-informed neural network (PINN) optimization depends on global properties of the underlying PDE and how the physics residual evolves across the domain. Standard optimizers such as Adam use fixed gradient-based statistics, while learned PINN optimizers replace the fixed rule with a learned update built from local parameters and optimization-history features. However, none explicitly use PDE-level information. We study two coupled design questions: what PDE-level information should a learned optimizer observe, and how should that information influence its update? We introduce an 11-dimensional PDE state-capturing operator structure, residual geometry, and short-horizon update response, and use it to condition a structured meta-learned optimizer through bounded feature-wise modulation. Repeated design studies identify the compact residual-geometry state G2 and bounded FiLM as the strongest overall choices among those tested. The resulting PDE-State-conditioned optimizer improves all evaluation metrics (relative-L2, L1, solution MSE, and physics MSE) over Adam and the unconditioned learned optimizer on Linear Advection, KdV, and Burgers.

0.18

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.62
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

Mesh2Shell Neural Operator for Inverse Shape Optimization

cs.LG ·2026-11-01 ·Xinyi Li, Xi Deng, Yubo Cao, Hudson Liu, Anima Anandkumar
similarity 0.61
Abstract

Physics-driven design seeks high-performing geometries, which need not conform to a learned shape category. Parametric and latent-space approaches facilitate surrogate-based optimization, but restrict deformations to prescribed shape families or learned decoders. We introduce the Mesh-to-Shell Neural Operator (M2S-NO) as the mesh-to-shell component of a category-agnostic inverse shape optimization framework. We separate the explicit mesh used for design from the volumetric representation used for physics prediction. M2S-NO maps oriented surface samples to a surface-centered shell representation, such as TruncatedSDF or HeatSDF. A separate problem-specific PDE neural operator (PDE-NO) maps this representation to physical fields. Objective gradients update mesh vertices through both operators, without a latent shape decoder. Preconditioning and remeshing support free-form deformation, while fixed interfaces are controlled directly on the mesh. Optional shell-space proposals enable topology changes. We evaluate geometric matching, jet-engine brackets, and neutron moderators, with independent FEM and OpenMC evaluation. Relative to the best training designs, M2S-NO reduces maximum bracket displacement by 14.3% and increases neutron-sensor current by 13.8%. Optimization also succeeds from an out-of-distribution bracket initialization, demonstrating the framework's geometric flexibility.

0.26

ATLAS: Adaptive TDA-guided Landscape-Aware Transistor Sizing

cs.AR ·2026-10-07 ·Youngmin Oh, Jihwan Won, Yuntae Park, Bosun Hwang, Suwan Kim
code/data similarity 0.61
Abstract

Analog transistor sizing, finding design parameters that simultaneously satisfy multiple performance specifications, is a labor-intensive bottleneck in circuit design. To support analog circuit experts, various automation methods have been proposed, including Bayesian optimization (BO), reinforcement learning (RL), and others. Yet existing methods are oblivious to the topological structure of a feasible design space, which can fragment into disconnected regions due to operating-regime transitions, conflicting specification trade-offs, and nonconvex device physics. This topological blindness causes the optimizer to converge within a single feasible region while missing others that may contain superior designs. To address this limitation, we propose ATLAS. a BO framework utilizing Topological Data Analysis (TDA). At each iteration, a Mapper graph is constructed over a surrogate-predicted feasible region to estimate connected regions, enabling topology-aware exploration from the very first iteration without any observed feasible points. A topological sensitivity score classifies candidates as bridge, frontier, or interior points, injecting a targeted exploration bonus into the acquisition function. Experiments on four analog circuit benchmarks in the GF180 and SKY130 processes demonstrate that \coin finds feasible designs with significantly fewer simulations than baselines, including RL and BO methods. To the best of our knowledge, this is the first work to apply topological data analysis to analog circuit design automation. The official implementation is publicly available on https://github.com/youngmin0oh/atlas.

0.44

AMOR: Adaptive Modal Operator Refinement for Operator Learning on Arbitrary Meshes and Irregular 3D Geometries

cs.CE math.NAphysics.comp-ph ·2026-10-27 ·David Voderholzer, Leonard Vetter, Thomas O'Leary-Roseberry
theorycode/data similarity 0.60
Abstract · 50 pages, 13 figures, 11 tables. Submitted to Computer Methods in Applied Mechanics and Engineering. Code: https://github.com/leonardvetter/…

Parametric PDEs in science and engineering are often posed on irregular meshes with geometries that may contain holes or complex boundaries, yet popular operator-surrogate architectures such as the Fourier Neural Operator (FNO) rely on structured geometries for fast computational kernels. We introduce Adaptive Modal Operator Refinement (AMOR), which replaces FNO's Fourier-based spectral convolutions with reduced-basis blocks and supports both data-driven and prescribed input/output bases through a common encode/decode interface. AMOR thus applies unmodified to arbitrary meshes and, because its spectral parameterization has no tensor-product dependence on the spatial dimension, it scales favorably to three dimensions, where FNO's spectral weights grow as $m^3$ with the number of spectral modes $m$. We prove that AMOR is a universal approximator of continuous operators. On two-dimensional structured-grid benchmarks, AMOR is competitive with FNO overall and surpasses PCANet: it outperforms FNO on nonlinear diffusion and Helmholtz problems, while a static snapshot basis keeps it from matching FNO's accuracy on the time-dependent Kolmogorov flow problem. On three-dimensional problems it matches or exceeds FNO's accuracy at lower inference cost on linear elastostatics while trailing FNO on a turbulent lid-driven-cavity flow and scales favorably to problems demanding high capacity. On irregular meshes, where FNO is not directly applicable, AMOR reduces the relative $L^2$ error over the FNO extension Geo-FNO by $31\%$ (airfoil) and $42\%$ (elasticity). Finally, AMOR maintains strong performance across three physically distinct, experimentally motivated loading regimes on a topologically nontrivial three-dimensional aircraft-rib mesh, demonstrating its applicability to realistic engineering problems without modification.

0.23