CS Paper Radar

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis

cs.LG cs.AIcs.CE ·submitted 2026-09-22 13:51 UTC · v1

Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

Closest papers

Nearest neighbours by meaning across the whole index.

Deep Learning-based Mechanical Characterization of Synthetically Generated Plant Fibers under Transverse Compression

cs.CV ·2026-10-12 ·Nikolaos Kegkeroglou, Bilal Sabillah, Myrto Inglezou, Vincent Placet, Céndric Clevy +1 more
published similarity 0.66
Abstract

Plant fibers are increasingly used as sustainable reinforcements in composites, but the intrinsic variability of their microstructure causes substantial scatter in transverse mechanical behavior, complicating composite design. Characterizing this behavior relies on finite element (FE) simulations requiring several minutes of high-performance computing per fiber, making high-throughput characterization across realistic fiber populations impractical. In this study, we propose a deep learning framework replacing this FE bottleneck with a fast pipeline. It includes two coupled recursive U-Nets predicting the step-by-step evolution of fiber deformation and internal stress fields under transverse compression, followed by a regression CNN estimating the transverse Young's modulus from the final stress field. Unlike prior approaches predicting stress fields for fixed configurations or idealized geometries, our framework recursively resolves the full temporal stress evolution for synthetic fibers derived from real hemp cross-sections, with or without a lumen. Trained on 1,000 synthetic fiber geometries with FE ground truth, it reproduces the stress field sequence with a Structural Similarity Index Measure (SSIM) of $0.9574 \pm 0.0074$ and a Root Mean Squared Error (RMSE) of $0.0345 \pm 0.0079$. It estimates transverse Young's modulus with an $R^2$ of $0.938 \pm 0.024$, a Mean Absolute Error (MAE) of $24.31 \pm 1.23$ MPa, and a Mean Absolute Percentage Error (MAPE) of $5.25 \pm 0.91\%$. Inference requires under one second per fiber versus five minutes per FE simulation, drastically reducing computational cost. This offers a fast, reliable tool for mechanical characterization of synthetic plant fibers, with promising applications in designing natural fiber-reinforced composites.

0.32

BAT-NO: A Boundary-Condition-Aware Transformer Neural Operator for Crashworthiness Prediction of Vehicle Components

cs.LG ·2026-10-02 ·Haoran Li, Yingxue Zhao, Haosu Zhou, Mustapha Ziane, Pierre Culiere +2 more
similarity 0.65
Abstract

High-fidelity finite-element simulations provide accurate crashworthiness predictions, but their cost limits iterative design exploration. Deep learning surrogates can reduce this cost, but many component-level models are developed under a single prescribed boundary condition, limiting generalisation to boundary variations. This work proposes a Boundary-Condition-Aware Transformer Neural Operator (BAT-NO) for autoregressive prediction of transient displacement fields and scalar crashworthiness responses under variations in geometry and boundary conditions. A B-pillar simulation framework evaluates generalisation across variations in geometry, impact position and velocity, and support stiffness. BAT-NO combines recurrent mesh processing with latent-grid Fourier operator processing. Boundary-condition information is transferred to the latent grid through a hybrid local--global mechanism. Slice-based attention models interactions among physically related regions, while direct boundary-to-grid projection preserves local spatial structure. Across the validation sets for the shape-only, shape-and-loading, and shape-loading-boundary cases, BAT-NO achieves the lowest mean final-step mean nodal Euclidean displacement error among the evaluated baselines. In the most challenging case, it reduces the mean error by 32.6% relative to the second-best model. Hyperparameter tuning reduces the validation error from 0.451 to 0.269 mm, with a comparable error of 0.267 mm on 300 unseen test simulations sampled within the investigated design space. An attention-based scalar decoder jointly predicts six response trajectories with a mean relative error of 2.46%. Most derived crashworthiness indicators have median errors below 3%. These results show that explicit local and global boundary-condition representations improve crashworthiness prediction over expanded component-level design spaces.

0.21

Element-Wise Femoral Stress Prediction: A Hybrid Graph Neural Network Surrogate for Finite Element Analysis

cs.LG ·2026-11-18 ·Sikha O K, Abdollah Moslemi, Elham Alizadeh, Ludovic Humbert, Miguel A. Gonzalez Ballester +1 more
code/data similarity 0.64
Abstract · This paper is submitted to Frontiers in Artificial Intelligence

Hip fractures represent a significant clinical challenge because they cause excess disability and mortality, and have a growing incidence in aging populations, as bone fragility increases. Although finite element analysis (FEA) provides biomechanical assessment of femoral strength, its clinical applicability is mainly limited by high computational cost. Conventional machine learning (ML) approaches have been explored as surrogate models for FEA; predictions are fast but fail to capture the spatial and topological structure of finite element meshes. To address these limitations, this study proposes a hybrid Graph Neural Network (GNN)-based framework for femoral stress prediction using graph-structured finite element modeling (FEM) data. The proposed GCN-SAGE-Residual architecture combines graph convolution, neighborhood aggregation, and residual learning to model spatial dependencies and stress propagation across mesh elements. We systematically evaluated 14 models in a primary comparison, spanning classical ML methods and baseline GNN architectures, complemented by a targeted architectural ablation that isolates the contribution of each component of the proposed design. Evaluation results demonstrate that the proposed hybrid architecture achieves the strongest predictive performance among all evaluated models. The proposed hybrid model achieves the best performance with an R^2 score of 0.8022 and mean absolute error of 2.879 MPa, highlighting the importance of incorporating mesh topology in biomechanical prediction tasks. The proposed framework provides a scalable and computationally efficient alternative for FEM-based orthopedic analyses and fracture risk assessment. The code is publicly available on GitHub.

0.34

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.63
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

FEA solver integration of a composite World Model with a Spiking Neural Network memory Block for computationally efficient modelling of defects and variabilities

cs.LG ·2026-11-19 ·Bassam El Said, Adam Sobey
similarity 0.62
Abstract

Each fibre-reinforced composite structure has a unique material architecture. The manufacturing methods used and the presence of defects lead to local variations which require material-scale models that can resolve the response in real time at every location in the structure. Concurrent multi-scale schemes provide this capability, but at a prohibitive computational cost for large structures as the number of integration points and time increments scales with size. Surrogates have been studied extensively as replacements for material-scale models to mitigate these computational limitations. A surrogate must represent an arbitrary local architecture including defects, track the irreversible material state over an unknown number of increments, remain stable when driven recursively by its own predictions, and fit within the memory available at every integration point. Here, a Composites World Model based on a Multi-Modal Spiking Transformer architecture is designed to meet these requirements. The proposed architecture combines a material encoder, a Spiking Neural Network memory block that tracks the long-term internal state of the material, and transformer blocks that learn the short-term applied strain state. The system is trained in three stages: material architecture encoding, base training on short time windows, and recursive fine-tuning with scheduled sampling to suppress cumulative error drift. The trained model is disassembled at inference and coupled to a non-linear FE solver, enabling structural scale simulation of composites containing embedded defects. Benchmarks against experimental results for IM7/8552 laminates under tension, compression and transverse shear, for pristine and wrinkled composites, show that the SNN memory block successfully tracks the material internal state and results in prediction errors between 0.4% and 4.8%.

0.25

Accelerating Atomistic-Continuum Simulations of Multilayer 2D Materials with Functional Principal Component Analysis-Based Machine Learning

cs.LG physics.comp-phmath-ph ·2026-11-13 ·Jonathan Oleson, Abhishek Keripale, Shashank Pathrudkar, Susanta Ghosh
similarity 0.62
Abstract

Atomistic-continuum simulations of complex wrinkling deformations in large-area multilayer two-dimensional (2D) materials are computationally expensive. To accelerate these simulations, this work presents a machine-learning (ML) framework that first constructs a low-dimensional representation of the deformation field, then learns the deformation in this reduced space. Dimensionality reduction of deformed 2D membranes is challenging because of the extremely high dimensionality of discretized deformation fields, the need to preserve surface continuity and prescribed geometric constraints, the stochastic nature of wrinkling patterns, and the limited availability of training data. We address these challenges using two-dimensional functional principal component analysis (FPCA). The proposed FPCA representation reduces deformation fields containing millions of degrees of freedom to latent spaces with only tens of dimensions while preserving the continuity of the deformed surface. In addition, prescribed homogeneous boundary constraints are satisfied exactly through an appropriate choice of basis functions in the FPCA representation. A neural network is then trained to predict the principal components from the system and loading parameters. The resulting ML-predicted deformation fields are used as high-quality initial configurations for the atomistic-continuum solver, which subsequently performs energy minimization to obtain equilibrium solutions. The framework is demonstrated for multilayer graphene subjected to uniaxial compression, biaxial compression, and combined biaxial compression and simple shear. For the most computationally intensive large-strain cases, the proposed approach achieves speedups of at least 6.8 times while converging to final energies comparable to, and in some cases lower than, those obtained using conventional atomistic-continuum initialization.

0.24

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.62
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.62
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22