CS Paper Radar

Multi-Material Topology Optimization of Phononic Crystals for Targeted Elastic Wave Bandgap

Bir Bahadur Chaudhary, Wenfeng Li, Ting Chen, Xinmai Yang, Candan Tamerler, Bin Ouyang, Shiguang Deng

cs.CE ·submitted 2026-10-22 23:39 UTC · v1

Abstract

Phononic crystals are periodic elastic structures that exhibit frequency bandgaps within which elastic waves cannot propagate. The formation and width of these bandgaps depend on the spatial distribution of material properties within periodic phononic unit cells. In this work, we propose novel topology optimization formulations to achieve multi-material design of phononic crystals for bandgap optimization at targeted frequencies, where we discover the influence of spatially varying properties of base materials on the band structures that block and permit elastic wave propagation. Specifically, we model wave propagation by Floquet-Bloch theory and solve the resulting eigenvalue problem by the finite element method along the boundary of the irreducible Brillouin zone. We first propose a multivariate weight-based method via a novel interpolation scheme that maps the design variables of an arbitrary number of candidate materials into effective density and stiffness for elastic wave-propagation calculations, where bandgaps arise from the contrast in the stiffness and inertia among material constituents. We then develop two formulations for bandgap optimization. The first formulation maximizes the gap between two adjacent frequency bands using a bound-based approach, where we introduce two auxiliary scalar variables as additional design variables and incorporate them directly into the design objective, yielding a linear, differentiable design objective, with the eigenfrequencies entering the formulation through associated constraints. The second formulation places a bandgap over a user-defined target frequency range through a dynamic band-pairing strategy, where we adaptively identify the relevant pair of adjacent bands amid optimization iterations. Towards the end, we validate the bandgap performance of our designs against the transmission loss spectra computed from COMSOL Multiphysics.

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.60
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

Learning Metamaterial Eigenmodes with Wavelet-Encoded Fourier Neural Operators

cs.LG cond-mat.mtrl-scics.CEphysics.comp-ph ·2026-09-08 ·Han Zhang, Alexander Ogren, Cynthia Rudin, Johann Guilleminot, L. Catherine Brinson
similarity 0.51
Abstract

Machine learning surrogates based on neural operators have shown broad applicability in solving forward PDE problems. However, eigenvalue problems, in which an eigenparameter and one of several valid eigenmodes must be simultaneously solved, remain difficult because standard operator learning formulations assume a unique input-output map. This work demonstrates that Fourier Neural Operators (FNOs), combined with wavelet-based encodings of PDE inputs, can learn and predict multiple eigenmodes of the elastic wave equation, corresponding to deformation modes of acoustic waves propagating through arbitrary metamaterial geometries. We provide a mechanistic explanation and experimental evidence for why wavelet encodings are well matched to the dual spatial-spectral structure of the FNO, enabling deterministic mode selection on both continuous-valued and binary-valued geometries within a single model, and for why prediction accuracy varies with geometric discontinuities. For metamaterial design, the resulting surrogate accelerates the simulation stage of the design cycle by three orders of magnitude relative to finite element analysis on a consumer-grade CPU, while preserving high fidelity. These results also carry broader implications for designing input encodings in other multi-mode PDE solvers based on spectral neural operators.

0.12

Selecting and verifying load-bearing periodic cells for elastic-wave band gaps with numerical acceptance checks

cs.CE physics.comp-ph ·2026-11-10 ·Shaoliang Yang, Jun Wang
code/dataunusual similarity 0.49
Abstract · 34 pages, 11 figures; includes supplementary material

A lattice mount must be stiff enough to support equipment and block vibration over a specified frequency range. Fast simulations help rank designs, but their errors can lead to a wrong acceptance decision. We present AMM (AgenticMetamaterials), an open-source Python tool that searches repeating cubic cells for targets on stiffness, the fraction of the cell that is solid, and band gaps. A complete band gap is an interval with no elastic-wave propagation in any direction. A separate checker allows for changes as the simulation grid gets finer. For gaps, it also tests for modes at sampled wave directions and wavelengths, so it can miss modes between samples. In 1,500 near-threshold tests of stiffness and solid fraction, the checker accepted 454 of 750 claims supported by the reference and none of the 750 false claims. Using the finest grid estimate alone accepted 42 false claims. In an independent finite-element comparison on ten new cells built from cubes joined by bars, the checker accepted one of two true gap claims and left all 17 false claims undecided. The reference could not classify the remaining claim. The protocol required every reported edge to err on the side of a narrower gap. The checker failed this test when it placed one upper edge too high, even though it left that thin-bar cell's claim undecided. Separating search from acceptance shows which targets the evidence supports and where a calculation needs further refinement.

0.55

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.48
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.48
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

An FE2 model for shear-deformable beams considering periodic lattice-like truss mesostructures

cs.CE ·2026-10-06 ·Julian Ochs, Jens Wackerfuß
similarity 0.48
Abstract · 37 pages, 21 figures, 10 tables, 66 references

The increasing use of lattice-like architectures in load-bearing members, facilitated by advances in additive manufacturing, calls for efficient multiscale approaches to their structural analysis. For slender lattice-like structures, beam models provide a computationally efficient macroscopic representation while retaining the ability to account for the underlying lattice architecture through an homogenization approach. Although finite element squared (FE2) approaches combining beam models at the macroscopic scale with continuum models at the microscopic scale have been established, an FE2 framework combining a beam-based macroscopic model with a truss-based microscopic model of a lattice structure has not yet been reported. To address this gap, an FE2 framework is developed for three-dimensional shear-deformable beams with periodically repeated lattice-like microstructures and periodic displacement boundary conditions. The proposed FE2 framework introduces constraint equations that (a) prevent rigid-body translations and rotations of the representative volume element (RVE) without imposing additional kinematic restrictions and (b) ensure that the homogenized stress resultants and material matrix are independent of the selected RVE length. To mitigate artificial boundary effects arising at the boundaries of the lattice-like RVE, local correction factors are introduced. The framework is assessed through numerical studies of two- and three-dimensional lattice-like structures with different geometries, considering both geometric and material linearity and nonlinearity. The results demonstrate the independence of the homogenized stress resultants and material matrix from the selected RVE length and show good agreement with the corresponding reference models in all investigated cases.

0.28

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.48
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.39

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.47
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27