CS Paper Radar

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

Theron Guo, Ondřej Rokoš

cs.CE ·submitted 2026-09-29 19:10 UTC · v1

Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

Closest papers

Nearest neighbours by meaning across the whole index.

Nonlinear homogenization of periodic unit cells composed of mixed continuum and structural elements with variationally consistent boundary-member reduction

cs.CE ·2026-11-10 ·Jonathan Stollberg, Dominik Schillinger
code/data similarity 0.57
Abstract

Periodic architected materials may be represented by representative volume elements (RVEs) combining continuum, truss, beam, and shell constituents. Their mixed translational and rotational kinematics complicate a consistent scale transition to a macroscale Cauchy continuum. We establish a nonlinear first-order computational homogenization framework for such mixed-dimensional RVEs. An auxiliary finite-strain Cosserat continuum serves solely as a power-equivalent carrier of their virtual power and generalized boundary kinematics. Its uniform rotation is identified with the macroscopic polar rotation and its wryness vanishes, so the effective medium remains of Cauchy type. Under periodic translational and rotational constraints, the Hill-Mandel condition yields a common nodal-force virial for the effective first Piola-Kirchhoff stress, independent of element type. For lower-dimensional members on periodically identified cell boundaries, fractional ownership of internal virtual work is shown to be variationally equivalent to a topology-preserving reduction retaining one representative of each set of periodic element copies. Because this equivalence covers the complete element virtual work and consistent linearization, it applies to geometrically and materially nonlinear and path-dependent constituents without rescaling section properties, constitutive parameters, or internal variables. Numerical examples recover the analytical small-strain response and cubic symmetry of a mixed continuum-shell-beam cell, verify the reduction and discrete power balance, and demonstrate finite-rotation buckling of a hyperelastic Octet lattice and history-dependent yield-surface evolution of an elastoplastic sandwich cell. The open-source implementation abqhom couples the framework to Abaqus.

0.46

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.55
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.55
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.38

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.53
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Semi-Implicit Pairwise Descent for Nonlocal Continuum Mechanics

cs.GR ·2026-09-09 ·Xukun Luo, Xiao Cheng, Yuzhong Guo, Ying Qiao, Wencheng Wang +1 more
published similarity 0.52
Abstract

We propose Semi-Implicit Pairwise Descent (SIPD), a unified nonlocal pairwise framework for simulating large-scale hyperelastic materials involving complex contact and friction. By reformulating the Finite Element Method (FEM) equations of motion into a pairwise force representation from a nonlocal perspective, our approach avoids costly Hessian computations, leading to a reduction in per-iteration computational overhead. Furthermore, we propose an analytical projection strategy for projecting our Hessian-free coefficient matrices to positive semi-definiteness. And we treat contact and friction as a unified anisotropic elastic energy, allowing for a seamless integration into the elastic solver framework. We mathematically prove that our method is unconditionally stable and numerically convergent.Experimental results demonstrate that SIPD achieves real-time performance for million-scale simulations even under intricate contact and friction conditions.

0.37

Reformulating plastic instabilities within a damage-like variational framework

cs.CE cond-mat.mtrl-sci ·2026-10-02 ·Baptiste Reyne
similarity 0.52
Abstract · 21 pages, 3 figures

Yield point phenomena in metals, anticracks in soils and snows, or planewise collapses in lattice metamaterials, are different manifestations of plastic instabilities characterized by stress softening and strain localization. Several independent constitutive descriptions exist and suffer from similar challenges: experimental difficulties to link local events to global measurements, and computational lack of convergence, spurious localization and mesh sensitivity. This work proposes a minimal field-agnostic constitutive framework where plastic softening is represented by a damage-like internal variable which explicitly separates stable hardening behavior from unstable softening. The resulting formulation admits a variational structure and can leverage regularization tools originally developed by the ductile fracture community. The framework aims at emphasizing similarities within plastic instability phenomena and establishing a bridge with continuum damage mechanics, to open a path towards regularized variational formulations of localized plastic flows.

0.29

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.52
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

cs.CE math.NA ·2026-09-02 ·Joaquín A. Hernández, S. Ares de Parga, Riccardo Rossi
benchmark similarity 0.51
Abstract · 49 pages, 22 figures, 6 tables

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

0.43