CS Paper Radar

Reformulating plastic instabilities within a damage-like variational framework

Baptiste Reyne

cs.CE cond-mat.mtrl-sci ·submitted 2026-10-02 14:02 UTC · v1

Abstract

Yield point phenomena in metals, anticracks in soils and snows, or planewise collapses in lattice metamaterials, are different manifestations of plastic instabilities characterized by stress softening and strain localization. Several independent constitutive descriptions exist and suffer from similar challenges: experimental difficulties to link local events to global measurements, and computational lack of convergence, spurious localization and mesh sensitivity. This work proposes a minimal field-agnostic constitutive framework where plastic softening is represented by a damage-like internal variable which explicitly separates stable hardening behavior from unstable softening. The resulting formulation admits a variational structure and can leverage regularization tools originally developed by the ductile fracture community. The framework aims at emphasizing similarities within plastic instability phenomena and establishing a bridge with continuum damage mechanics, to open a path towards regularized variational formulations of localized plastic flows.

Comment
21 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.57
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04

A Differentiable Framework for Inverse Identification of Heterogeneous Cohesive Laws

cs.CE physics.comp-ph ·2026-10-24 ·Sida Hao, Jinkyo Han, Bahador Bahmani
similarity 0.57
Abstract

This work develops a differentiable finite element framework based on an intrinsic cohesive-zone formulation for identifying traction-separation laws from global force-displacement histories and spatially sparse strain measurements. The framework employs physics-constrained neural networks to represent flexible, thermodynamically structured cohesive laws, with sensitivities computed through automatic differentiation and a discrete adjoint that accounts for the history-dependent evolution of interfacial damage. To enable identification of spatially heterogeneous cohesive behavior, we extend learned constitutive priors to irreversible interfacial damage by constructing a shared, low-dimensional family of cohesive laws from representative traction-separation histories. This representation exploits common constitutive structure and parameter sharing to reduce the number of unknowns and regularize the inverse problem, while allowing local cohesive behavior to vary spatially through latent coordinates. Numerical investigations involving double-cantilever beams and fiber-matrix composites demonstrate that accurate reproduction of global force-displacement responses does not necessarily imply accurate recovery of the underlying cohesive laws. Incorporating spatially resolved strain measurements substantially improves constitutive identification, even when the admissible responses are constrained by a learned prior. Comparisons with conventional bilinear cohesive models and Bayesian optimization further illustrate the benefits of the learned constitutive representation and adjoint-based identification for high-dimensional inverse problems.

0.20

Scalar Entropic Damage Transport: Well-posed softening with a single damage variable

cs.CE math.NA ·2026-11-13 ·Jonas Nutz, Vikram Laheri, Matti Schneider
similarity 0.54
Abstract · 42 pages, 15 figures. Submitted to Computer Methods in Applied Mechanics and Engineering

Entropic Damage Transport (EDT) represents material softening via a local continuum damage model while ensuring the well-posedness of the mechanical boundary value problem. It is based on a convexification of the time-incremental potential associated with a rate-limited scalar damage model. A one-dimensional distribution of damage states serves as the internal variable, and the number of these states grows with the number of time steps. We show that the emergence of the damage distribution is an artifact of the time discretization. Surprisingly, the distribution concentrates at a single damage state in the time-continuous limit, and EDT converges to a rate-limited damage model with a scalar damage variable, whose free energy is jointly convex in the strain and the reciprocal degradation. We exploit this hidden convexity by a frozen-metric discretization in terms of the reciprocal degradation, which renders every increment jointly convex. The resulting scalar update preserves damage irreversibility, the prescribed damage-rate limitation and thermomechanical consistency, reduces to a scalar equation and provides a symmetric and positive definite algorithmic tangent in closed form. Computational experiments assess the accuracy and the efficiency of both formulations from the material point to the microstructure level, and demonstrate that the scalar update permits a finite-element computation of industrial size with more than 14 million degrees of freedom.

0.54

Thermodynamically consistent neural constitutive models for elastoplasticity via eigen-representations

cs.CE ·2026-11-09 ·Harikrishnan Vijayakumaran, Shunyu Yin, Martin Abendroth, Miguel A. Bessa, Karl A. Kalina
theory similarity 0.54
Abstract

Neural network material models can represent yield surfaces and hardening laws with far more flexibility than classical closed-form plasticity formulations, but training such a model end-to-end through an implicit return map introduces non-trivial challenges. This work presents a thermodynamically consistent neural constitutive model for rate-independent, isotropic elastoplasticity that jointly learns a flexible yield function together with its evolution laws. For non-associative flow, the yield function extends the convex flow potential by a jointly trained additive term, which renders the model thermodynamically consistent by construction. Isotropy and convexity are enforced simultaneously across all learnable components through a permutation-invariant, spectral (eigenvalue-based) representation. Training proceeds through a backward-Euler return map, with gradients propagated by the implicit function theorem together with an eigenvalue-degeneracy-aware scheme for safe differentiation. The robustness and generality of the approach are demonstrated by reproducing known constitutive models, including non-associative flow, learning material behavior from stress--strain data extracted from a full-field finite element simulation, and capturing unknown non-associative behavior from homogenized representative volume elements of a foam. Finally, the proposed neural plasticity model is evaluated within finite element simulations to solve boundary-value-problem under plane stress.

0.27

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.53
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

Learning the Constitutive Behavior of Materials via Neural Operators and Causal Attention: Case Studies in Plasticity and Damage

cs.LG cs.CE ·2026-09-02 ·Rishabh Arora, Lisa Scheunemann, Tim Brepols, Shahed Rezaei
similarity 0.53
Abstract

Classical constitutive modeling of path-dependent inelastic materials relies on internal state variables whose evolution equations must be postulated based on domain knowledge and calibrated against experimental data. However, in many practical settings, the relevant internal variables are typically not measurable in experiments, and the constitutive response must be inferred entirely from measured strain-stress data without any prior knowledge of the material's internal state. We propose a data-driven constitutive modeling framework based on the concept of a material operator, which treats a deforming material as a functional mapping from its entire strain history to the corresponding stress response. In contrast to traditional autoregressive or recurrent formulations, the model is trained directly on full loading paths as function-to-function mappings, predicting complete stress trajectories in a single parallel forward pass. Temporal path dependence is enforced through a causally masked attention mechanism embedded within the operator, which restricts the model's attention to past material states while preserving computational parallelizability. Spectral convolutions provide discretization-invariant representations in the frequency domain, while causal attention captures highly adaptive, non-local history dependence. Furthermore, sinusoidal activation functions are used to resolve the strong nonlinear transitions inherent in inelastic regimes. The framework is evaluated across multidimensional, rate-independent material models exhibiting complex phenomena, with an emphasis on nonlinear plasticity and ductile damage accumulation. The results demonstrate accurate and robust predictions of irreversible deformation mechanisms while simultaneously achieving resolution invariance and excellent parallel efficiency.

0.29

Variational r-Adaptive Cloth Simulation

cs.GR ·2026-08-18 ·Jiahao Wen, Zhen Chen, Jernej Barbič, Danny M. Kaufman
similarity 0.53
Abstract · 11 pages

We present the first r-adaptive method for simulating cloth dynamics and statics with frictional contact in modern cloth pipelines. Thin cloth requires high effective spatial resolution to reproduce wrinkles, folds, buckling, and sharp contact features. However, applying existing variational r-adaptivity to piecewise-linear shells reveals two coupled failure modes. Discretized incremental-potential (IP) optimization can become trapped in poor local minima, yielding suboptimal physical configurations. It can also lower IP artificially by collapsing elements, invalidating the finite-element approximation on which the objective relies. We address both problems with degeneracy-activated quality regularization. The regularizer remains inactive for well-shaped elements, preserving anisotropic adaptation and local densification, but becomes strong near degeneracy. It suppresses spurious low-energy basins, improves escape from suboptimal physical minima, and prevents element bunching, a cloth-specific failure in which elements progressively collapse as cloth slides across sharp contact features. For practical performance, we introduce a dynamic nonlinear solver that exploits within-timestep coherence through accelerated derivative evaluation and dynamic IPC tolerance updates for r-adaptive iterative trust-region (ITR) solves. This yields a 3-6x speedup over prior optimal ITR. Experiments on challenging frictional-contact scenarios show that, under equal vertex-count and time-budget constraints, our method achieves higher visual fidelity than fixed meshes.

0.31

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.53
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08