CS Paper Radar

Variational r-Adaptive Cloth Simulation

Jiahao Wen, Zhen Chen, Jernej Barbič, Danny M. Kaufman

cs.GR ·submitted 2026-08-18 14:34 UTC · v1

Abstract

We present the first r-adaptive method for simulating cloth dynamics and statics with frictional contact in modern cloth pipelines. Thin cloth requires high effective spatial resolution to reproduce wrinkles, folds, buckling, and sharp contact features. However, applying existing variational r-adaptivity to piecewise-linear shells reveals two coupled failure modes. Discretized incremental-potential (IP) optimization can become trapped in poor local minima, yielding suboptimal physical configurations. It can also lower IP artificially by collapsing elements, invalidating the finite-element approximation on which the objective relies. We address both problems with degeneracy-activated quality regularization. The regularizer remains inactive for well-shaped elements, preserving anisotropic adaptation and local densification, but becomes strong near degeneracy. It suppresses spurious low-energy basins, improves escape from suboptimal physical minima, and prevents element bunching, a cloth-specific failure in which elements progressively collapse as cloth slides across sharp contact features. For practical performance, we introduce a dynamic nonlinear solver that exploits within-timestep coherence through accelerated derivative evaluation and dynamic IPC tolerance updates for r-adaptive iterative trust-region (ITR) solves. This yields a 3-6x speedup over prior optimal ITR. Experiments on challenging frictional-contact scenarios show that, under equal vertex-count and time-budget constraints, our method achieves higher visual fidelity than fixed meshes.

Comment
11 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Learnable Persistent Wrinkle Formation in Cloth Simulation

cs.GR ·2026-09-12 ·Deshan Gong, Ningtao Mao, Xiaoyuan Yang, Xinyu Lu, He Wang +1 more
publishedcode/data similarity 0.61
Abstract · A paper accepted in the SIGRRAPH Asia 2026 conference

The mechanical memory of fabrics often leads to persistent wrinkles, which reflect key physical properties and habitual wear patterns. Simulating these wrinkles accurately is essential for visual plausibility in digital garments, yet no dedicated approach exists for inferring the parameters that govern their formation due to the lack of precise datasets and estimation methods. We introduce Fabric-101, an inclusive, accurate, and extendable fabric dataset comprising over 101 common fabrics following textile standards. Unlike existing datasets, it captures three physically distinct deformation components (i.e., self-recoverable (elastic), recoverable (friction-driven), and unrecoverable (plastic)), from cyclic loading-unloading measurements. Building on this data, we propose a differentiable cloth simulator combining an elasto-plastic model with friction, designed to capture recoverable and unrecoverable wrinkle formation. Our simulator is differentiable and uses adjoint method to learn fabric physical parameters from the measured hysteresis curves, learning fabric-specific wrinkle behaviors. Through extensive experiments, we demonstrate that our model reproduces persistent wrinkles that are visually and physically similar to real fabrics across diverse materials and motions. Dataset and code are available in https://github.com/GongDeshan/Fabric_101_for_Wrinkles.

0.48

Semi-Implicit Pairwise Descent for Nonlocal Continuum Mechanics

cs.GR ·2026-09-09 ·Xukun Luo, Xiao Cheng, Yuzhong Guo, Ying Qiao, Wencheng Wang +1 more
published similarity 0.58
Abstract

We propose Semi-Implicit Pairwise Descent (SIPD), a unified nonlocal pairwise framework for simulating large-scale hyperelastic materials involving complex contact and friction. By reformulating the Finite Element Method (FEM) equations of motion into a pairwise force representation from a nonlocal perspective, our approach avoids costly Hessian computations, leading to a reduction in per-iteration computational overhead. Furthermore, we propose an analytical projection strategy for projecting our Hessian-free coefficient matrices to positive semi-definiteness. And we treat contact and friction as a unified anisotropic elastic energy, allowing for a seamless integration into the elastic solver framework. We mathematically prove that our method is unconditionally stable and numerically convergent.Experimental results demonstrate that SIPD achieves real-time performance for million-scale simulations even under intricate contact and friction conditions.

0.37

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.56
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04

Explicit Frictional Contact Modeling in Neural Garment Simulation

cs.CV cs.GRcs.LG ·2026-10-24 ·Thanh-Nguyen Truong, Vu-Hoang Tran, Ching-Chun Huang
published similarity 0.53
Abstract · WACV 2027

Graph neural networks (GNNs) simulate garments efficiently through physics-based self-supervision, but leave body-garment friction implicit or inside training energies, with no friction coefficient $μ$ to set at inference; retraining the tested GNNs with a coefficient-specific friction term barely responds to $μ$. Optimization-based solvers decide each contact's stick-slip state from the reaction that governs it, but only by re-optimizing the garment state at every step; a friction term in a one-pass training objective acts as a fixed-weight penalty on sliding, and the trained weights apply no per-contact Coulomb condition at inference. We therefore resolve friction explicitly after prediction: a Modular Contact Operator, attached to a frozen predictor without retraining or an iterative solve, estimates the normal load, applies a closed-form Coulomb correction along a path across body triangles, and propagates the induced motion through the cloth as a linearized membrane wave. On HOOD and ContourCraft, it raises sticking and lowers slip monotonically in $μ$, tracking a reference solver's response while coefficient-specific retraining stays flat, with low penetration and reference-consistent stretching at an eighth of the solver's runtime.

0.28

ClothCode: Generative Modeling for Garment State Estimation and Dynamics Prediction

cs.RO cs.CV ·2026-10-09 ·Yingdong Ru, Lipeng Zhuang, Shiyu Fan, Zhuo He, Florent P. Audonnet +1 more
hot direction similarity 0.53
Abstract

We introduce ClothCode, a unified generative framework for garment state estimation and action-conditioned dynamics prediction in a shared discrete configuration space. A material-aligned tokenizer encodes garment configuration as residual vector-quantized patch tokens, while task-specific Masked Generative Transformers predict these tokens through parallel confidence-guided refinement. Across three garment templates, ClothCode reduces mean displacement error by 26.6% for state estimation and 37.0% for dynamics prediction relative to the strongest baselines. Dynamics prediction requires only 16.7 ms per window, compared with 556.2 ms for diffusion. Integrated into the same model-predictive controller, ClothCode improves real-world folding and flattening success from 56.7% to 78.9%. Further results and videos are available at: https://anonymous.4open.science/r/ClothCode-DE32

0.36

Reformulating plastic instabilities within a damage-like variational framework

cs.CE cond-mat.mtrl-sci ·2026-10-02 ·Baptiste Reyne
similarity 0.53
Abstract · 21 pages, 3 figures

Yield point phenomena in metals, anticracks in soils and snows, or planewise collapses in lattice metamaterials, are different manifestations of plastic instabilities characterized by stress softening and strain localization. Several independent constitutive descriptions exist and suffer from similar challenges: experimental difficulties to link local events to global measurements, and computational lack of convergence, spurious localization and mesh sensitivity. This work proposes a minimal field-agnostic constitutive framework where plastic softening is represented by a damage-like internal variable which explicitly separates stable hardening behavior from unstable softening. The resulting formulation admits a variational structure and can leverage regularization tools originally developed by the ductile fracture community. The framework aims at emphasizing similarities within plastic instability phenomena and establishing a bridge with continuum damage mechanics, to open a path towards regularized variational formulations of localized plastic flows.

0.29

On the Numerical Reliability of Differentiable Physics-Based Optimization for Robotic Material Manipulation

cs.RO cs.LG ·2026-09-28 ·Xintong Yang, Minglun Wei, Yu-Kun Lai, Ze Ji
published similarity 0.52
Abstract · Accepted as an oral presentation at the IROS 2026 workshop: Deformable Objects Manipulation: Research Foundations, Reproducibility and Real-…

Differentiable physics is increasingly used in robotic material manipulation for system identification, trajectory or skill optimization, demonstration generation, and robot or end-effector design. These applications depend on gradients propagated through long, contact-rich simulation rollouts. We study the numerical reliability of those gradients using two Material Point Method (MPM) system-identification benchmarks derived from elastoplastic and granular manipulation. The benchmarks provide controlled cases for three effects that also arise in broader differentiable physics-based optimization. GPU many-to-one sums whose order depends on thread scheduling changed long-horizon gradients and reversed the sign of one parameter gradient relative to a deterministic reference. Finite-difference checks became less reliable for longer rollouts because repeated-run loss variation grew much faster than the loss change produced by the tested parameter perturbations. Observation and loss definitions changed optimization behaviour and the solution preferred by an independent metric. These results motivate reproducible accumulation, finite-difference validation that compares perturbation-induced loss changes with repeated-run variation, and explicit reporting of objective construction when differentiable simulation is used for robotic optimization.

0.28

Refine Where It Matters: Contact-Adaptive Meshing for Deformable Object Manipulation

cs.RO ·2026-10-09 ·Gabriel Johnson, Tom Olesch, Fei Liu
hot direction similarity 0.52
Abstract

Deformable-object manipulation requires accurate modeling of highly localized contact while maintaining simulation speeds suitable for interactive use. Uniformly fine tetrahedral meshes can resolve these interactions, but they introduce unnecessary degrees of freedom throughout the object. Coarse meshes are more efficient, yet they may under-resolve contact-induced deformation. We present a contact-adaptive mesh refinement framework that introduces spatial resolution only where it is most useful. The method uses geometric, elastic, and contact quantities already available from the deformable-body solver to score candidate edges. A fully GPU-parallel procedure then selects a conflict-free subset and updates both mesh topology and physical state directly within the simulation loop. We evaluate the approach on real deformable-object manipulation sequences. Adaptive refinement reduces simulation-to-real error, improves agreement with a fine-mesh reference, and remains substantially more efficient than uniformly fine simulation. These results show that local refinement can improve physical fidelity without incurring the cost of a globally fine discretization. The framework provides a practical basis for contact-rich simulation in interactive manipulation, sim-to-real modeling, and online physical digital twins.

0.24