CS Paper Radar

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

Ningyu Yan, Yuntong Huang, Yang Xiang

cs.CE ·submitted 2026-08-16 16:21 UTC · v1

Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

Closest papers

Nearest neighbours by meaning across the whole index.

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.58
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08

Reformulating plastic instabilities within a damage-like variational framework

cs.CE cond-mat.mtrl-sci ·2026-10-02 ·Baptiste Reyne
similarity 0.57
Abstract · 21 pages, 3 figures

Yield point phenomena in metals, anticracks in soils and snows, or planewise collapses in lattice metamaterials, are different manifestations of plastic instabilities characterized by stress softening and strain localization. Several independent constitutive descriptions exist and suffer from similar challenges: experimental difficulties to link local events to global measurements, and computational lack of convergence, spurious localization and mesh sensitivity. This work proposes a minimal field-agnostic constitutive framework where plastic softening is represented by a damage-like internal variable which explicitly separates stable hardening behavior from unstable softening. The resulting formulation admits a variational structure and can leverage regularization tools originally developed by the ductile fracture community. The framework aims at emphasizing similarities within plastic instability phenomena and establishing a bridge with continuum damage mechanics, to open a path towards regularized variational formulations of localized plastic flows.

0.29

Mesh2Shell Neural Operator for Inverse Shape Optimization

cs.LG ·2026-11-01 ·Xinyi Li, Xi Deng, Yubo Cao, Hudson Liu, Anima Anandkumar
similarity 0.57
Abstract

Physics-driven design seeks high-performing geometries, which need not conform to a learned shape category. Parametric and latent-space approaches facilitate surrogate-based optimization, but restrict deformations to prescribed shape families or learned decoders. We introduce the Mesh-to-Shell Neural Operator (M2S-NO) as the mesh-to-shell component of a category-agnostic inverse shape optimization framework. We separate the explicit mesh used for design from the volumetric representation used for physics prediction. M2S-NO maps oriented surface samples to a surface-centered shell representation, such as TruncatedSDF or HeatSDF. A separate problem-specific PDE neural operator (PDE-NO) maps this representation to physical fields. Objective gradients update mesh vertices through both operators, without a latent shape decoder. Preconditioning and remeshing support free-form deformation, while fixed interfaces are controlled directly on the mesh. Optional shell-space proposals enable topology changes. We evaluate geometric matching, jet-engine brackets, and neutron moderators, with independent FEM and OpenMC evaluation. Relative to the best training designs, M2S-NO reduces maximum bracket displacement by 14.3% and increases neutron-sensor current by 13.8%. Optimization also succeeds from an out-of-distribution bracket initialization, demonstrating the framework's geometric flexibility.

0.26

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.56
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

Variational r-Adaptive Cloth Simulation

cs.GR ·2026-08-18 ·Jiahao Wen, Zhen Chen, Jernej Barbič, Danny M. Kaufman
similarity 0.56
Abstract · 11 pages

We present the first r-adaptive method for simulating cloth dynamics and statics with frictional contact in modern cloth pipelines. Thin cloth requires high effective spatial resolution to reproduce wrinkles, folds, buckling, and sharp contact features. However, applying existing variational r-adaptivity to piecewise-linear shells reveals two coupled failure modes. Discretized incremental-potential (IP) optimization can become trapped in poor local minima, yielding suboptimal physical configurations. It can also lower IP artificially by collapsing elements, invalidating the finite-element approximation on which the objective relies. We address both problems with degeneracy-activated quality regularization. The regularizer remains inactive for well-shaped elements, preserving anisotropic adaptation and local densification, but becomes strong near degeneracy. It suppresses spurious low-energy basins, improves escape from suboptimal physical minima, and prevents element bunching, a cloth-specific failure in which elements progressively collapse as cloth slides across sharp contact features. For practical performance, we introduce a dynamic nonlinear solver that exploits within-timestep coherence through accelerated derivative evaluation and dynamic IPC tolerance updates for r-adaptive iterative trust-region (ITR) solves. This yields a 3-6x speedup over prior optimal ITR. Experiments on challenging frictional-contact scenarios show that, under equal vertex-count and time-budget constraints, our method achieves higher visual fidelity than fixed meshes.

0.31

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.55
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.55
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.55
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25