CS Paper Radar

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek

cs.GR math.NAmath.OC ·submitted 2026-09-23 09:19 UTC · v2

Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

Closest papers

Nearest neighbours by meaning across the whole index.

Process-Aware Thickness Analysis in CAD Models using Hybrid Geometric Methods

cs.CE ·2026-09-14 ·Serafeim Baltadouros, Joost R. Duflou
similarity 0.60
Abstract

Thickness is a critical geometric attribute in Design for Manufacturability (DFM), yet its computational analysis in CAD environments remains largely process-agnostic. Existing approaches rely either on inscribed-sphere or ray-casting methods, each carrying limitations that make them poorly suited as universal solutions across manufacturing processes. This paper presents a process-aware thickness analysis system for parts intended for molding and milling, where the geometric method is selected and its outputs interpreted according to the DFM rules meaningful to each process. For molding, the sphere-based method detects maximum thickness violations and wall non-uniformity, and segments parts into distinct thickness zones. For milling, ray-casting identifies regions of insufficient thickness and detects thin features prone to deflection or failure. Validation on representative parts demonstrates that this hybrid approach surfaces process-specific manufacturability issues, offering designers actionable geometric feedback early in the design cycle.

0.09

Differentiable Voxelization of Surface Representations

cs.GR cs.CV ·2026-08-16 ·Tobias Djuren, Ugo Finnendahl, Markus Worchel, Hendrik Meyer, Marc Alexa
published similarity 0.59
Abstract

Different shape representations facilitate different computations. Surface representations, in particular meshes, are often used for modeling, whereas volume representations are useful for spatial queries such as intersection or containment. Optimizing a surface representation based on a volumetric properties by gradient descent requires the derivatives of the volume relative to its bounding surface. We derive this gradient for winding numbers and show that it can be efficiently computed for volumetric values sampled on a regular grid (voxel representation) and surface parameters based on vertex sets (triangle meshes). This enables an efficient solution for a variety of optimization problems. We demonstrate the practical use of this approach at the examples of deforming meshes to resolve intersections, being manufacturable by cutting with a bandsaw from three directions, and creating shapes that are close to tiling 3D space.

0.23

Piecewise CMC Segmentation for Fluidic Shaping

cs.GR ·2026-10-30 ·Abhinit Sati, Jacob Garrett, Valeri Frumkin, Edward Chien, Emily Whiting
similarity 0.59
Abstract

We present a novel mesh segmentation approach for the fabrication of 3D geometries using fluidic shaping. The physics of fluidic shaping gives rise to Constant Mean Curvature (CMC) surfaces due to interfacial tension between the polymer fluid used to shape the 3D structure and an immersion fluid of equal density. Our mesh segmentation algorithm partitions the mesh into a piecewise CMC surface, such that every segment is a CMC approximation to the target within a user specified tolerance. We run a CMC evolution procedure in the loop during segmentation to find physically stable CMC surfaces that can be reliably fabricated. We extract a wireframe scaffold from the seams of this segmentation and inject polymer fluid into the frame for curing. The structure cures as a single, continuous, isotropic volume, yielding nanometer scale roughness on the interior surface of each segment without the costly post-processing or smoothing that conventional state-of-the-art approaches require for comparable surface quality.

0.27

N -phase flow simulations using X-Mesh and an explicit marker interface representation

cs.CE math.NA ·2026-11-10 ·Antoine Quiriny, Jonathan Lambrechts, Michel Henry, Nicolas Moës, Jean-François Remacle
similarity 0.59
Abstract · Keywords: Multiphase flow; X-Mesh; Front tracking; Finite element method; Topology change; Surface tension

We present a marker-based X-Mesh framework for incompressible N-phase flow simulations with sharp, explicitly tracked interfaces. The interface is represented by Lagrangian marker chains, while the computational mesh is deformed so that selected mesh edges conform to the tracked geometry without changing mesh connectivity. This combination preserves the advantages of body-fitted finite element discretizations while allowing highly distorted and nearly degenerated elements to capture fine interfacial features on relatively coarse meshes without requiring mesh refinement. The arbitrary Lagrangian-Eulerian (ALE) finite element solver uses a pressure field that is continuous within each phase and discontinuous across the fitted interface. Surface tension is introduced through a variational membrane, so the pressure jump is resolved without prescribing a curvature-dependent correction; a Young wall energy provides the corresponding treatment of fluid-fluid-solid triple points. Topological changes are handled geometrically from the marker representation. Numerical experiments illustrate the ability of the approach to transport complex interfaces and to control topology changes through marker-based feature-size criteria.

0.31

Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes

cs.GR ·2026-10-30 ·Yefan Zhi, Masoud Akbarzadeh
similarity 0.58
Abstract

This paper presents a closed curve trimming algorithm for overhang optimization in large-format support-free 3D printing of bespoke manifold shapes. Large-format 3D printing enables efficient fabrication of complex, bespoke shapes. Because of the material properties and surface quality requirements, such shapes are typically printed without support structures and have to be designed as support-free. Most current methods of overhang optimization are limited to certain types of geometry and do not apply to bespoke shapes. Our method directly optimizes sliced toolpath curves with minimal geometric modification. Given an overhang limit, it ensures that all resulting toolpath curves are strictly within the overhang limit while preserving their orientation and preventing intersections. The algorithm is based on curve offsetting and trimming, and is applicable to closed toolpath curves that represent the boundaries of a solid volume.

0.26

Shape optimisation of nonlinear Naghdi shells on discrete geometries

cs.CE math.NA ·2026-08-11 ·Ado Farsi, Alberto Paganini
benchmark similarity 0.58
Abstract · 19 pages, 10 figures, 6 tables. Revised manuscript submitted to Computers & Structures

We present an automated framework for the shape optimisation of a geometrically nonlinear, five-parameter Naghdi model on faceted triangulations. By recovering directors numerically, we remove the requirement for an analytic or spline parameterisation of the mid-surface, whereas partial selective reduced integration alleviates locking. The residual and tangent of symbolic energies are generated in an automated fashion building on Firedrake's and UFL's symbolic differentiation capabilities. Additionally, UFL's and pyadjoint's algorithmic differentiation enables automated first and second shape derivative evaluations that are verifiably correct via Taylor tests. The forward model agrees with the Sze/Abaqus semi-cylinder reference. A three-model mesh-refinement study indicates that geometry recovery and surface faceting have small effects on the predicted deflection. Numerical experiments show that 100 trust-region iterations suffice to reduce the squared-displacement functional of a semi-cylinder by 98.4% and the elastic strain energy of a bracket by 94.6%. The latter result is validated against a COMSOL benchmark. Non-uniqueness of optimal shapes is demonstrated by optimising initial designs subject to small perturbations. Comparisons with linearised designs distinguish optimisation performance from the accuracy of the predicted nonlinear response.

0.12

Gaussian Sculpting: End-to-End Controllable Surface Reconstruction via Field Optimization

cs.CV cs.GR ·2026-08-11 ·Ke Jiaxin, Juncheng Liu, Yi Wang, Zhouhui Lian, Bin Liu +2 more
similarity 0.57
Abstract

3D Gaussian Splatting (3DGS) has recently enabled real-time novel view synthesis with impressive quality. However, it struggles to recover accurate surfaces under limited viewpoints and due to the inherent irregularity of Gaussian primitives. The resulting geometric errors are notoriously difficult to correct manually. To address these issues, we propose Gaussian Sculpting, a fully differentiable end-to-end framework for high-quality surface reconstruction. Our key insight is to anchor Gaussians onto an evolving differentiable surface, allowing them to guide signed distance field (SDF) optimization instead of extracting the surface only during post-processing. To enable stable gradient isolation during joint optimization, we design a bi-level training strategy in which the outer loop optimizes the geometry represented by the SDF, while the inner loop updates the Gaussians with the geometry fixed. We further impose constraints on Gaussian parameters to ensure consistency with the underlying surface, thereby improving both geometric and appearance fidelity during optimization. In addition, we introduce a multi-resolution subdivision scheme based on octree-like partitioning to preserve fine details while reducing memory consumption. Experiments on object-level scenes demonstrate that our method effectively removes redundant surfaces, recovers missing structures caused by limited viewpoints, and achieves strong reconstruction quality even at relatively low resolutions.

0.04

SeamFlow: Structure-Aware Flow Matching on Edge Probabilities for Artist-Like UV Unwrapping

cs.CV ·2026-09-04 ·Yuming Zhao, Zangyueyang Xian, Qijian Zhang, Rendong Liang, Qin Jia +2 more
top venuecode/data similarity 0.56
Abstract · Accepted by Siggraph Asia 2026

3D surface cutting and UV unwrapping are fundamental problems in computer graphics. Traditional geometric optimization methods mainly focus on reducing parameterization distortion, but they often overlook visual semantic coherence in seam layouts. Recent autoregressive generative methods improve semantic coherence, yet limited perception of mesh topology often causes inaccurate local cuts. To address these limitations, we introduce SeamFlow, a novel generative framework for 3D surface cutting. We reformulate the discrete mesh-cutting problem as continuous flow matching in a high-dimensional edge-probability space. Through continuous relaxation, SeamFlow learns a deterministic mapping from a Gaussian prior to a target seam-probability distribution. An evolution network couples local topological tokens with global shape priors and guides smooth probability flow through Ordinary Differential Equation solving. Compared with existing autoregressive generative frameworks, SeamFlow improves topology awareness through edge tokenization while eliminating both 3D spatial projection errors and artificial sequential-order bias. Extensive experiments demonstrate that SeamFlow achieves exceptional semantic coherence and remarkably low parameterization distortion. The project page is https://meshy-dev.github.io/seamflow.

0.48