CS Paper Radar

Process-Aware Thickness Analysis in CAD Models using Hybrid Geometric Methods

Serafeim Baltadouros, Joost R. Duflou

cs.CE ·submitted 2026-09-14 09:04 UTC · v1

Abstract

Thickness is a critical geometric attribute in Design for Manufacturability (DFM), yet its computational analysis in CAD environments remains largely process-agnostic. Existing approaches rely either on inscribed-sphere or ray-casting methods, each carrying limitations that make them poorly suited as universal solutions across manufacturing processes. This paper presents a process-aware thickness analysis system for parts intended for molding and milling, where the geometric method is selected and its outputs interpreted according to the DFM rules meaningful to each process. For molding, the sphere-based method detects maximum thickness violations and wall non-uniformity, and segments parts into distinct thickness zones. For milling, ray-casting identifies regions of insufficient thickness and detects thin features prone to deflection or failure. Validation on representative parts demonstrates that this hybrid approach surfaces process-specific manufacturability issues, offering designers actionable geometric feedback early in the design cycle.

Closest papers

Nearest neighbours by meaning across the whole index.

Hemispherical Ray-Casting Analysis for Milling Configuration Classification and Machinability Assessment

cs.CE ·2026-08-18 ·Serafeim Baltadouros, Joost R. Duflou, Bert Lauwers
published similarity 0.74
Abstract · Presented at the 20th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME '26)

Early-stage manufacturability assessment reduces design iterations and costly downstream changes. This paper presents a GPU-accelerated geometric analysis method that evaluates CNC machinability and setup requirements directly from CAD files. A multi-stage pipeline uses hemispherical ray-casting to quantify surface accessibility, followed by directional variability analysis to extract dominant machining axes. Threshold-based classification determines 3-axis versus multi-axis machining. For 3-axis parts, orthogonal ray-casting and reachability optimization compute the minimum setup count and explicitly flag inaccessible surfaces. Validation cases show computation times sufficiently short to support interactive CAD workflows, enabling quantitative manufacturability feedback during the design stage without requiring manufacturing expertise.

0.40

Geometry-Based Metrics for Early-Stage Hull-Form Producibility Screening

cs.CE cs.CG ·2026-09-23 ·Andrea Serani, Kevin Maki
code/data similarity 0.68
Abstract

This paper presents a representation-aware framework for geometry-based screening of hull-form producibility at early design stages. The proposed signature combines dimensionless total and signed developability deviation with curvature-class area fractions, distributed fields, metric-specific validity, and representation provenance. These descriptors characterize surface features relevant to plate forming and developability, but are not calibrated predictors of fabrication cost, forming effort, or process feasibility. Native IGES/STEP boundary representations (BReps) are evaluated through direct differential geometry and trimmed-domain quadrature, whereas triangulated surfaces use discrete curvature recovery and area-weighted aggregation. Analytical and semi-analytical controls verify the formulation, while matched-face BRep-to-mesh tests assess discrete curvature recovery. Application to DTMB 5415, KCS, JBC, and KVLCC2M shows that curvature intensity and areal extent provide complementary information and that derivative-based outcomes can be representation sensitive. KCS, for example, exhibits approximately 24% greater developability deviation than DTMB 5415, while double-curved regions occupy 72.9% of its valid surface versus nearly the entire DTMB valid surface. The resulting quantities provide an early geometric screening layer for subsequent use as objectives, constraints, surrogate responses, or design-space features. HullProd, the companion open-source software, implements the signature, distributed fields, validity, and provenance.

0.26

MillBill: A Machining Agent with Geometric Feedback

cs.AI cs.CV ·2026-11-17 ·Gennadii Savrasov, Artem Slavin, Soslan Kabisov, Andrey Kuznetsov, Anton Konushin +1 more
code/data similarity 0.65
Abstract · 18 pages, 8 figures. Code: https://github.com/kulibinai/millbill

Turning a CAD model into a machining program requires both process knowledge and geometric precision. Language models can generate such workflows by writing geometry and toolpath code for each part, but this makes numerical execution part of the model's task. We introduce MillBill, an agent that separates machining decisions from their geometric execution and verification. Given a boundary-representation part, stock, and material, a locally hosted, mid-sized open model proposes operations and cutting parameters for indexed three-axis machining. A geometric harness generates toolpaths, simulates material removal, and returns feedback for plan refinement. Setup planning accounts for what the available cutters can physically reach, rather than visibility alone. We evaluate the resulting programs by the fraction of the target surface area within the specified tolerance after simulated machining. With Qwen3.8-27B, MillBill outperforms frontier-model approaches that construct their own geometry and toolpath workflows on the evaluated machining tasks. Code: https://github.com/kulibinai/millbill

0.68

Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes

cs.GR ·2026-10-30 ·Yefan Zhi, Masoud Akbarzadeh
similarity 0.60
Abstract

This paper presents a closed curve trimming algorithm for overhang optimization in large-format support-free 3D printing of bespoke manifold shapes. Large-format 3D printing enables efficient fabrication of complex, bespoke shapes. Because of the material properties and surface quality requirements, such shapes are typically printed without support structures and have to be designed as support-free. Most current methods of overhang optimization are limited to certain types of geometry and do not apply to bespoke shapes. Our method directly optimizes sliced toolpath curves with minimal geometric modification. Given an overhang limit, it ensures that all resulting toolpath curves are strictly within the overhang limit while preserving their orientation and preventing intersections. The algorithm is based on curve offsetting and trimming, and is applicable to closed toolpath curves that represent the boundaries of a solid volume.

0.26

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.60
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25

Design for Machinability: Topology Optimization for Subtractive Machining Using Trimmed Neural Fields

cs.GR ·2026-10-11 ·Hongrui Chen, Levent Burak Kara
top venue similarity 0.59
Abstract

Topology optimization has found significant utility in additive manufacturing, but the resulting geometries are often difficult to realize using subtractive methods. The complex, curved surfaces of optimized designs typically require time-consuming point milling operations. In contrast, geometries composed of developable surfaces are well suited to flank milling, enabling substantial improvements in machining efficiency and surface quality. However, globally minimizing Gaussian curvature leads to overly simplistic designs. We address this challenge with a novel method that represents geometry using three implicit neural fields, optimized to produce machinable components. The resulting designs consist of regions of developable surfaces separated by seamlines where curvature is concentrated. Seamlines are efficiently computed as intersections of the implicit fields, while the geometry emerges through their product. By constraining surfaces to align with the cutter's normal or tangential direction, our approach further accommodates practical constraints of 3-axis machining. We demonstrate concurrent optimization of topology and Gaussian curvature, enabling control over seamline feature scale. Compared to methods that enforce subtractive machinability without considering milling efficiency, our approach consistently reduces machining time while maintaining competitive structural performance.

0.51

STAMP: Manufacturing-Informed Generative Design and Shape Optimization of Sheet Panels

cs.LG ·2026-11-13 ·Jihoon Kim, Jun Hyeok Song, Wonho Ha, Namwoo Kang
similarity 0.57
Abstract · 25 pages, 11 figures, 7 tables, including supplementary material

Generative design of formed sheet panels must preserve geometric manufacturing conditions while exploring layouts and improving performance. STAMP embeds these conditions directly in the shape representation. Each panel is described by its material layout and a reference surface with one height at each occupied position in a plane perpendicular to the drawing direction. Nominal thickness is prescribed along the normal. The representation allows curved surfaces, ribs, and openings. It excludes reference-surface undercuts and keeps nominal thickness fixed without manufacturing penalty terms. Because these conditions belong to the representation, every generated and optimized panel satisfies them regardless of training-set size. Boundary-conditioned diffusion generates alternative layouts, and predictor gradients guide a surface optimization that retains outlines, openings, and designated fixed regions. We demonstrate STAMP on automotive hood inner panels using CarHoods10k. With a comparable number of stored values, depth maps reconstruct surfaces more accurately than point-cloud and voxel baselines. From only five training designs, one of three training runs yields novel and varied layouts. A generator trained on 500 designs, 6.5% of the training set, already reaches the layout variety of the full-data model. Across 11 held-out design families, predictor-based selection among existing dataset designs yields an average gap of 0.18 mm to the best available FEA deformation, versus an expected 1.59 mm for random selection. It does better than random selection in all 11 families. At a 10% depth-change bound, a network not used in the search predicts an average deformation reduction of 24.8% for six generated and existing panels, with a 3.2% average mass increase computed from geometry. Engineers can thus explore and optimize panels within this manufacturing-informed design space.

0.18

IndustrialCAD-1400: Benchmarking Detailed Industrial Assemblies from Text

cs.AI ·2026-10-17 ·Hebao Zhu, Kang An, Zhuoke Liao, Faqiang Qian, Ziliang Wang +2 more
benchmark similarity 0.57
Abstract

Industrial assemblies require more than a recognizable shape: functional parts, interfaces, dimensions and service features must satisfy a detailed request together. We introduce IndustrialCAD-1400, a text-to-CAD benchmark for this industrial setting. Its 1,400 requests combine 400 equipment categories across 40 domains with 250 four-case design families. Family requests specify a median of 17 named component or configuration roles and six explicit numeric targets; controlled variants test whether dimensions change while shared structure is retained. Task construction draws on documented manufacturer information, owner specifications and engineering guidance. Models generate geometry programs from requests, and a common Blender environment executes them to produce scenes, optional measurements, and standardized views for evaluation. A request assessment of front, isometric, and top views measures visible component, arrangement, and interface fulfillment without requiring a single reference geometry. Five stratified panels preserve complete families while covering the benchmark exactly once, enabling balanced comparisons and separating industrial breadth from controlled numerical responsiveness. In conclusion, IndustrialCAD-1400 extends text-to-CAD from recognizable part geometry to industrial assembly synthesis under joint component, interface, spatial, and numerical specifications.

0.25