CS Paper Radar

Piecewise CMC Segmentation for Fluidic Shaping

Abhinit Sati, Jacob Garrett, Valeri Frumkin, Edward Chien, Emily Whiting

cs.GR ·submitted 2026-10-30 18:10 UTC · v1

Abstract

We present a novel mesh segmentation approach for the fabrication of 3D geometries using fluidic shaping. The physics of fluidic shaping gives rise to Constant Mean Curvature (CMC) surfaces due to interfacial tension between the polymer fluid used to shape the 3D structure and an immersion fluid of equal density. Our mesh segmentation algorithm partitions the mesh into a piecewise CMC surface, such that every segment is a CMC approximation to the target within a user specified tolerance. We run a CMC evolution procedure in the loop during segmentation to find physically stable CMC surfaces that can be reliably fabricated. We extract a wireframe scaffold from the seams of this segmentation and inject polymer fluid into the frame for curing. The structure cures as a single, continuous, isotropic volume, yielding nanometer scale roughness on the interior surface of each segment without the costly post-processing or smoothing that conventional state-of-the-art approaches require for comparable surface quality.

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.59
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25

Gen2Physics: Grounding Generated 3D Meshes in Physics via Multi-View Material Decomposition

cs.CV ·2026-08-24 ·Mauro Comi, Jordi Serrano Berbel, Kevis-Kokitsi Maninis, Philipp Henzler, Manuel Sanchez
similarity 0.54
Abstract

While state-of-the-art generative models produce high-fidelity 3D meshes, these outputs lack the physical properties required for interactive simulation, gaming, or robotics. We introduce Gen2Physics, a unified and automated framework that grounds generated meshes in physics by automatically decomposing them into their constituent material components. Unlike prior approaches, which focus on volumetric representations incompatible with standard physics engines, Gen2Physics operates directly on meshes to produce immediately simulation-ready assets. Our pipeline integrates a fine-tuned Vision Transformer for dense material segmentation, a robust 2D-to-3D consistency projection, and a Vision-Language Model (VLM) guided refinement that leverages contextual reasoning to assign physical properties and infer internal geometry (solid vs. hollow). By converting surface patches into volumes with distinct densities, our method enables physically plausible dynamic simulations. Experimental results on the ABO-500 and PartNet-Material benchmarks demonstrate that Gen2Physics more than doubles the material segmentation accuracy of prior physics-grounding pipelines (15.6 to 48.3 mIoU), while matching the mass-estimation accuracy of volumetric methods and being the only approach to output watertight per-material sub-meshes.

0.47

Design for Machinability: Topology Optimization for Subtractive Machining Using Trimmed Neural Fields

cs.GR ·2026-10-11 ·Hongrui Chen, Levent Burak Kara
top venue similarity 0.53
Abstract

Topology optimization has found significant utility in additive manufacturing, but the resulting geometries are often difficult to realize using subtractive methods. The complex, curved surfaces of optimized designs typically require time-consuming point milling operations. In contrast, geometries composed of developable surfaces are well suited to flank milling, enabling substantial improvements in machining efficiency and surface quality. However, globally minimizing Gaussian curvature leads to overly simplistic designs. We address this challenge with a novel method that represents geometry using three implicit neural fields, optimized to produce machinable components. The resulting designs consist of regions of developable surfaces separated by seamlines where curvature is concentrated. Seamlines are efficiently computed as intersections of the implicit fields, while the geometry emerges through their product. By constraining surfaces to align with the cutter's normal or tangential direction, our approach further accommodates practical constraints of 3-axis machining. We demonstrate concurrent optimization of topology and Gaussian curvature, enabling control over seamline feature scale. Compared to methods that enforce subtractive machinability without considering milling efficiency, our approach consistently reduces machining time while maintaining competitive structural performance.

0.51

Toolpath Overhang Optimization for the Large-Format 3D Printing of Bespoke Shapes

cs.GR ·2026-10-30 ·Yefan Zhi, Masoud Akbarzadeh
similarity 0.53
Abstract

This paper presents a closed curve trimming algorithm for overhang optimization in large-format support-free 3D printing of bespoke manifold shapes. Large-format 3D printing enables efficient fabrication of complex, bespoke shapes. Because of the material properties and surface quality requirements, such shapes are typically printed without support structures and have to be designed as support-free. Most current methods of overhang optimization are limited to certain types of geometry and do not apply to bespoke shapes. Our method directly optimizes sliced toolpath curves with minimal geometric modification. Given an overhang limit, it ensures that all resulting toolpath curves are strictly within the overhang limit while preserving their orientation and preventing intersections. The algorithm is based on curve offsetting and trimming, and is applicable to closed toolpath curves that represent the boundaries of a solid volume.

0.26

Differentiable Voxelization of Surface Representations

cs.GR cs.CV ·2026-08-16 ·Tobias Djuren, Ugo Finnendahl, Markus Worchel, Hendrik Meyer, Marc Alexa
published similarity 0.53
Abstract

Different shape representations facilitate different computations. Surface representations, in particular meshes, are often used for modeling, whereas volume representations are useful for spatial queries such as intersection or containment. Optimizing a surface representation based on a volumetric properties by gradient descent requires the derivatives of the volume relative to its bounding surface. We derive this gradient for winding numbers and show that it can be efficiently computed for volumetric values sampled on a regular grid (voxel representation) and surface parameters based on vertex sets (triangle meshes). This enables an efficient solution for a variety of optimization problems. We demonstrate the practical use of this approach at the examples of deforming meshes to resolve intersections, being manufacturable by cutting with a bandsaw from three directions, and creating shapes that are close to tiling 3D space.

0.23

Freeform Programmable Liquid Crystal Elastomers via Monolithic Integration of Co-Optimization and 4D-Printing

cs.CE math.OC ·2026-10-23 ·Yibo Wang, Asad Farooq Ahmed, Weichen Li, Weiyun Xu, Xiaojia Shelly Zhang
similarity 0.53
Abstract

Liquid crystal elastomers (LCEs) are active materials capable of large, reversible thermally induced actuation, offering significant potential for applications such as artificial muscles and soft robotics. However, their broader deployment is hindered by the lack of a unified design-to-fabrication framework, the strong coupling among geometry, director fields, and manufacturing constraints, and the difficulty of reliably translating complex designs into physically realizable architectures. Here, we present an autonomous and monolithic integration of co-optimization and 4D printing that enables the end-to-end design-to-realization of versatile programmable LCE architectures with superior precision, complexity, and versatility. The proposed framework establishes a unified design strategy that co-optimizes the freeform multilayer geometry and fully continuous layer-specific director distributions, and subsequently translates the optimized fields into fabrication-ready DIW toolpaths through an automated manufacturing-aware pipeline. To bridge computation and realization, we develop an optimization-centered 4D printing approach with automated, fabrication-aware toolpath generation tailored for direct ink writing of LCEs. With the proposed design-to-fabrication paradigm, we experimentally realize architectures that exhibit complex, non-intuitive thermo-mechanical behaviors. Experiments achieve highly challenging prescribed functionalities beyond the reach of intuition-based approaches and show excellent agreement with numerical simulations across all samples. This work establishes a generalizable inverse design and physical realization of freeform programmable LCE systems, enabling function-oriented and optimization-driven intelligent LCE applications for next-generation soft robotic and responsive material engineering.

0.23

TopoSurfel: Closing the Loop between Gaussian Surfels and Meshes for Surface Reconstruction

cs.CV cs.GR ·2026-08-21 ·Chuanjin Fan, Wenjie Chang, Bohao Liao, Yujia Chen, Wenfei Yang +1 more
top venuecode/data similarity 0.52
Abstract · Project page: https://fan-treasure.github.io/TopoSurfel_page/

3D Gaussian Splatting has achieved remarkable success in novel view synthesis. However, extracting high-fidelity surfaces directly from 3DGS remains challenging due to its discrete and unstructured nature. Existing 3DGS-based reconstruction methods typically rely on multi-view geometric consistency or local constraints. Without an explicit structured geometric prior during optimization, these methods often struggle to resolve structural ambiguities, leading to artifacts and floaters, particularly in textureless or occluded regions. To address this limitation, we propose TopoSurfel, a novel framework that closes the loop between Gaussian surfels and continuous meshes. Unlike recent methods that incorporate mesh extraction into the differentiable pipeline by introducing auxiliary neural networks or extra per-Gaussian parameters, we dynamically extract a continuous proxy mesh via a non-trainable differentiable iso-surfacing process. Leveraging this differentiable connection, we introduce a mesh-guided surfel evolution strategy, including normal alignment and geometry-aware density control, to effectively suppress floaters and fill surface holes. Furthermore, to address the initialization challenges in large-scale environments, we propose a spatially aware hybrid re-initialization strategy that ensures robust reconstruction across complex scenes. Extensive experiments demonstrate that TopoSurfel achieves competitive geometric reconstruction accuracy while maintaining high-quality mesh-based novel view synthesis. The code for our method is available at https://github.com/Fan-Treasure/TopoSurfel.

0.41

SILSA: Sliding-Window Slice Latents for Topology-Preserving High-Resolution 3D Generation

cs.CV cs.AIcs.LG ·2026-10-01 ·Tianjiao Yu, Xinzhuo Li, Yifan Shen, Ying Shen, Kiet A. Nguyen +2 more
top venue similarity 0.51
Abstract · Accepted at NeurIPS 2026. Project link: https://plan-lab.github.io/silsa

High-resolution 3D generation increasingly relies on voxel latents and multi-stage pipelines that first predict active structure and then synthesize local geometry. While effective, this design fragments continuous surfaces into many local tokens, inflates generation cost, and often weakens topological consistency for thin or highly connected shapes. We introduce SILSA, a topology-aware 3D generation framework that represents shapes with compact sliding-window slice latents. Instead of generating expensive voxel tokens, SILSA uses a fixed set of overlapping slices along the three canonical axes, where each token summarizes a local depth window to preserve cross-sectional continuity and support single-stage rectified-flow generation. A Slice VAE encodes oriented surface samples into multi-axis slice latents and reconstructs them with a sparse volumetric decoder, while a Volumetric Anchor Lattice coordinates directional slice streams through a shared 3D workspace. To preserve structural correctness, we introduce slice-level topology supervision that matches persistence diagrams and aligns Betti transitions across neighboring slices. Experiments show that SILSA improves structural fidelity while substantially reducing generation cost. SILSA improves PSNR by $8.7\%$, coverage by $5.96$ absolute points, and Betti error by $9.2\%$ over the strongest baseline, while using $70.0\%$ fewer tokens than the next-most compact baseline and over $98\%$ fewer tokens than sparse or hierarchical tokenizers, effectively reducing training memory by $40.4\%$ and inference time by $58.5\%$. Qualitative results further show improved preservation of thin structures, repeated components, and long-range connectivity.

0.71