CS Paper Radar

Shape optimisation of nonlinear Naghdi shells on discrete geometries

Ado Farsi, Alberto Paganini

cs.CE math.NA ·submitted 2026-08-11 00:57 UTC · v2
benchmark

Abstract

We present an automated framework for the shape optimisation of a geometrically nonlinear, five-parameter Naghdi model on faceted triangulations. By recovering directors numerically, we remove the requirement for an analytic or spline parameterisation of the mid-surface, whereas partial selective reduced integration alleviates locking. The residual and tangent of symbolic energies are generated in an automated fashion building on Firedrake's and UFL's symbolic differentiation capabilities. Additionally, UFL's and pyadjoint's algorithmic differentiation enables automated first and second shape derivative evaluations that are verifiably correct via Taylor tests. The forward model agrees with the Sze/Abaqus semi-cylinder reference. A three-model mesh-refinement study indicates that geometry recovery and surface faceting have small effects on the predicted deflection. Numerical experiments show that 100 trust-region iterations suffice to reduce the squared-displacement functional of a semi-cylinder by 98.4% and the elastic strain energy of a bracket by 94.6%. The latter result is validated against a COMSOL benchmark. Non-uniqueness of optimal shapes is demonstrated by optimising initial designs subject to small perturbations. Comparisons with linearised designs distinguish optimisation performance from the accuracy of the predicted nonlinear response.

Comment
19 pages, 10 figures, 6 tables. Revised manuscript submitted to Computers & Structures

Closest papers

Nearest neighbours by meaning across the whole index.

Physically Interpretable Basin Selection in Discrete-Variable Origami Design

cs.LG cond-mat.mtrl-scicond-mat.soft ·2026-11-12 ·Lucy Liu, Leon M. Kamp, Katia Bertoldi, L. Mahadevan
similarity 0.58
Abstract

Automatic differentiation has enabled rapid progress on continuous-variable mechanical design problems, but gradient-based optimization still struggles with discrete variables. The standard approach is to optimize using a continuous relaxation of the choices, then commit to the nearest discrete design at the end. Why this procedure selects unfavorable basins is poorly understood. Here, we introduce a practical, interpretable design problem inspired by origami, in which automatic differentiation is used to design shapes with a target functional behavior. Each origami sheet has a fixed geometry, and a bilevel optimization framework tunes which one of four discrete hinge types to place at each fold. Baseline gradient-based design settles into basins with a large discretization gap: relaxed optimization solves 97% of runs, but the final, discrete solutions succeed only half the time. We find that the gap can be relieved with a surprisingly simple modification. An initialization prior uniformly biased toward the stiff, flat hinge option boosts the final solve fraction from 49% to 69%. Applying the prior adds no additional compute and leaves the optimization process unchanged. Compared to the baseline, sheets produced with the prior have greater geometric compatibility and mechanical stiffness. Directly penalizing frustration and floppiness in the outer loss function produces an even greater improvement than the prior does, raising the solve fraction to 78% and indicating that these properties help distinguish the unfavorable basins. Our results demonstrate that loss landscapes for mechanical design can have physically meaningful basins that are not robust to discretization and cause solves to fail. Targeting these basins' physical signatures, even with just an initialization bias, helps avoid them.

0.44

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.58
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25

Geometry-Based Metrics for Early-Stage Hull-Form Producibility Screening

cs.CE cs.CG ·2026-09-23 ·Andrea Serani, Kevin Maki
code/data similarity 0.56
Abstract

This paper presents a representation-aware framework for geometry-based screening of hull-form producibility at early design stages. The proposed signature combines dimensionless total and signed developability deviation with curvature-class area fractions, distributed fields, metric-specific validity, and representation provenance. These descriptors characterize surface features relevant to plate forming and developability, but are not calibrated predictors of fabrication cost, forming effort, or process feasibility. Native IGES/STEP boundary representations (BReps) are evaluated through direct differential geometry and trimmed-domain quadrature, whereas triangulated surfaces use discrete curvature recovery and area-weighted aggregation. Analytical and semi-analytical controls verify the formulation, while matched-face BRep-to-mesh tests assess discrete curvature recovery. Application to DTMB 5415, KCS, JBC, and KVLCC2M shows that curvature intensity and areal extent provide complementary information and that derivative-based outcomes can be representation sensitive. KCS, for example, exhibits approximately 24% greater developability deviation than DTMB 5415, while double-curved regions occupy 72.9% of its valid surface versus nearly the entire DTMB valid surface. The resulting quantities provide an early geometric screening layer for subsequent use as objectives, constraints, surrogate responses, or design-space features. HullProd, the companion open-source software, implements the signature, distributed fields, validity, and provenance.

0.26

Love Handles: Decimation for Deformation Handles with Compact Support and Low Memory Footprints

cs.GR ·2026-08-18 ·David IW Levin, Paul Kry, Kartic Subr, Ryan Schmidt, Etienne Vouga +1 more
similarity 0.56
Abstract

Estimating the deformation of solids via physical simulation is an important problem spanning fields such as computer animation, engineering and robotics. Such simulations are computationally expensive and scale poorly when the representation of an object is refined by increasing the level of discretization. Reduced Order Methods (ROM) offer computational savings by decreasing the number of degrees of freedom, for example by using \emph{handles} that control groups of vertices. We present the first decimation-based algorithm for computing a sparse, compactly supported set of deformation handles. The crux of our method utilizes iterative algebraic simplification to optimize handle deformation to match any input deformation, such as linear vibration modes. This applies to any volumetric input mesh, including those with high genus or porous features, since we do not alter the geometry. We also devise an efficient algorithm to compute and update compact supports and their associated weights. We leverage compact support to develop an efficient, reduced-cubature computation scheme. Once optimized, our handles offer a memory-efficient solution while enabling real-time elastodynamics simulation of complex geometry. We show real-time performance on a variety of tetrahedral meshes with up to 796,623 tetrahedra.

0.23

Mesh2Shell Neural Operator for Inverse Shape Optimization

cs.LG ·2026-11-01 ·Xinyi Li, Xi Deng, Yubo Cao, Hudson Liu, Anima Anandkumar
similarity 0.56
Abstract

Physics-driven design seeks high-performing geometries, which need not conform to a learned shape category. Parametric and latent-space approaches facilitate surrogate-based optimization, but restrict deformations to prescribed shape families or learned decoders. We introduce the Mesh-to-Shell Neural Operator (M2S-NO) as the mesh-to-shell component of a category-agnostic inverse shape optimization framework. We separate the explicit mesh used for design from the volumetric representation used for physics prediction. M2S-NO maps oriented surface samples to a surface-centered shell representation, such as TruncatedSDF or HeatSDF. A separate problem-specific PDE neural operator (PDE-NO) maps this representation to physical fields. Objective gradients update mesh vertices through both operators, without a latent shape decoder. Preconditioning and remeshing support free-form deformation, while fixed interfaces are controlled directly on the mesh. Optional shell-space proposals enable topology changes. We evaluate geometric matching, jet-engine brackets, and neutron moderators, with independent FEM and OpenMC evaluation. Relative to the best training designs, M2S-NO reduces maximum bracket displacement by 14.3% and increases neutron-sensor current by 13.8%. Optimization also succeeds from an out-of-distribution bracket initialization, demonstrating the framework's geometric flexibility.

0.26

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.54
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04

Representation-Aware Closed-Surface Parameterization: Exact Sensitivity Analysis and Pole-Aware Planar Preconditioning

cs.CG cs.GRmath.NA ·2026-10-31 ·Zixi Yi, Gary P. T. Choi
similarity 0.53
Abstract

Surface parameterization is a fundamental task in geometry processing and shape analysis. For topologically closed surfaces, it is common to parameterize them onto a standardized closed domain in $\mathbb{R}^3$, with a prime example being a unit sphere for genus-0 closed surfaces. Many mapping methods use planar projections and perform computations on the plane rather than directly on the 3D surface. However, perturbations introduced before projection or geometric evolution propagate through the computation and may affect map quality, convergence, stopping behavior, and geometric validity. In this work, we formulate representation sensitivity as a branchwise input--output problem, separating smooth propagation through active Jacobians from changes in anchors, stopping rules, and fallback events. Under consistent piecewise-linear assembly, the unmodified south-pole Beltrami correction in the FLASH method for spherical conformal parameterization reduces exactly to source-mesh harmonic extension. On a fixed-anchor branch, the corrected map factors into chart transition, harmonic propagation, and inverse stereographic projection, yielding an explicit sensitivity Jacobian and a finite-triangle conditioning bound. Separately, we introduce a bounded five-parameter affine preconditioner over planar scale, translation, and anisotropy and evaluate candidates on the corrected spherical map. Across 30 genus-0 surfaces, it reduces median polar upper-tail log-condition and chord-angle distortion by $10.17\%$ and $10.97\%$, respectively, with both measures improving on every mesh. We also apply the framework to other spherical mapping methods including the conformalized mean-curvature flow and spherical density-equalizing maps. Altogether, our work highlights the importance of representation selection as a structural and practical component of spherical parameterization and downstream computation.

0.26

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.52
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22