CS Paper Radar

N -phase flow simulations using X-Mesh and an explicit marker interface representation

Antoine Quiriny, Jonathan Lambrechts, Michel Henry, Nicolas Moës, Jean-François Remacle

cs.CE math.NA ·submitted 2026-11-10 11:10 UTC · v1

Abstract

We present a marker-based X-Mesh framework for incompressible N-phase flow simulations with sharp, explicitly tracked interfaces. The interface is represented by Lagrangian marker chains, while the computational mesh is deformed so that selected mesh edges conform to the tracked geometry without changing mesh connectivity. This combination preserves the advantages of body-fitted finite element discretizations while allowing highly distorted and nearly degenerated elements to capture fine interfacial features on relatively coarse meshes without requiring mesh refinement. The arbitrary Lagrangian-Eulerian (ALE) finite element solver uses a pressure field that is continuous within each phase and discontinuous across the fitted interface. Surface tension is introduced through a variational membrane, so the pressure jump is resolved without prescribing a curvature-dependent correction; a Young wall energy provides the corresponding treatment of fluid-fluid-solid triple points. Topological changes are handled geometrically from the marker representation. Numerical experiments illustrate the ability of the approach to transport complex interfaces and to control topology changes through marker-based feature-size criteria.

Comment
Keywords: Multiphase flow; X-Mesh; Front tracking; Finite element method; Topology change; Surface tension

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.59
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25

Solving the Incompressible Navier-Stokes Equations on Oriented Curved Surfaces Discretized by Point Clouds

cs.CE math.NAphysics.comp-phphysics.flu-dyn ·2026-08-31 ·Alejandra Foggia, Ivo F. Sbalzarini
similarity 0.57
Abstract

We present a meshfree numerical solver for the incompressible Navier-Stokes equations on oriented curved surfaces that are represented by surface point clouds. On curved surfaces, numerical challenges pertaining to stiffness and pressure-velocity coupling are exacerbated. Moreover, vector calculus on curved surfaces differs from its Euclidean counterpart. The presented method operates on surface point clouds in an Eulerian frame of reference without requiring a computational grid or mesh. It achieves consistent approximation in space and time with high order of accuracy; we demonstrate up to order six. The incompressibility constraint is locally imposed as a weak artificial compressibility approximation, avoiding global matrix inversion. We show that the method provides consistent and convergent approximations of surface vector fields and differential operators. We study the relationship between error, spatial resolution, and artificial Mach number and characterize the frequency spectrum of the artificial oscillations. We provide numerical solutions of the incompressible Navier-Stokes equations on symmetric surfaces, such as the sphere and torus, and on parametric and non-parametric asymmetric surfaces. Since the proposed method works directly on unstructured surface point clouds, it provides a promising approach for simulations on image-derived geometries, such as in biological morphogenesis from microscopy videos.

0.53

A meshfree solver for coupled bulk-surface problems with self-organizing surface geometry

cs.CE math.NAphysics.comp-ph ·2026-09-02 ·Lennart J. Schulze, Alejandra Foggia, Ivo F. Sbalzarini
similarity 0.57
Abstract

In many systems, the interaction between a deformable surface or interface and the surrounding bulk fluid is coupled with intrinsic spatiotemporal dynamics within the moving surface. Examples include tumor growth, biological tissue morphogenesis, cardiac mechanics, multi-phase surfactant chemistry, additive manufacturing, clothing wear-and-tear, and reactive combustion flows. Solving such problems requires both geometric computing algorithms to track and resolve the surface and numerical methods to solve the coupled governing equations in the surface and the surrounding bulk phase. Here, we present a fully meshfree numerical solver for such coupled bulk-surface problems with deformable interfaces. The presented solver tracks the surface implicitly, solving for the dynamic surface geometry based on stress balance coupled to surrounding fluid phases. We show convergence for a mass-conserving case on a growing sphere and solve bulk-surface problems with incompressible Navier-Stokes fluids coupled to in-surface nonlinear reaction-diffusion dynamics. Finally, we show a model of biological morphogenesis, solving simultaneously for the dynamic surface shape and the fields on the curved surface with two-way coupling.

0.30

Axion: A differentiable, GPU-native finite element framework,demonstrated on phase-field fracture

cs.CE ·2026-11-18 ·Wei Wang, Meenu Krishnan U., Somdatta Goswami
benchmarkcode/data similarity 0.57
Abstract · 35 pages, 9 figures

We introduce Axion (Autodifferentiable, XLA-compiled, Implicit, On-device Numerics), a differentiable, GPU-native finite element framework written in JAX. The element kernels, Newton and Krylov iterations, bound-constrained updates, staggered coupling of fields, and the loop over load increments are expressed as a single program that is just-in-time compiled and executed on the GPU without host intervention. Consistent tangent operators are obtained by forward-mode automatic differentiation of the element residual, and derivatives of the discrete solution with respect to model parameters are obtained by differentiating the same program. Global operators are applied element by element without assembling a sparse matrix, octree mesh refinement is performed within fixed-size arrays, and a cell-based domain decomposition runs the same program on several GPUs. Phase-field fracture is implemented as the first module because it combines fine mesh resolution, bound-constrained damage, and repeated nonlinear solves over a loading history, which together make it computationally expensive. On two- and three-dimensional single-edge-notched tension benchmarks, a uniformly refined Axion computation completes faster than the corresponding adaptive FEniCSx computation. At identical discretization, the two-dimensional benchmark runs 37.9 times faster on one GPU than a FEniCSx implementation on one CPU. Strong and weak scaling efficiencies on four GPUs are 92% and 96%, respectively. Large-scale demonstrations include hydraulic fracture in a poroelastic medium (0.38M degrees of freedom), fracture of a multi-material premolar under contact loading (0.69M degrees of freedom), and a concrete gravity dam (96M degrees of freedom) on a single GPU. The implementation is available as open-source software.

0.35

A review of weakly enforced Dirichlet boundary conditions in computational flow analysis

cs.CE math.NAphysics.flu-dyn ·2026-09-06 ·Ming-Chen Hsu, Monu Jaiswal, Yuri Bazilevs
survey similarity 0.57
Abstract

Strongly enforced Dirichlet boundary conditions require highly refined near-wall meshes to resolve steep velocity and thermal gradients. This introduces high computational costs, especially for practical flow simulations. Weakly enforced boundary conditions alleviate this burden by acting as a variationally consistent near-wall model. By allowing a controlled slip at the solid wall, weak enforcement recovers accurate flow quantities on coarse boundary-layer meshes across both incompressible and compressible regimes. Furthermore, weak boundary conditions serve as the fundamental enabling technology for immersogeometric analysis. Because the weak operator evaluates boundary integrals independently of the background mesh, high-fidelity flow analysis can be performed directly on complex geometries without fitting a mesh to the surface. This capability has facilitated direct geometry-to-analysis workflows for boundary-representation CAD models, raw point clouds, photogrammetric reconstructions, and segmented medical images. This review examines the unified mathematical development of the weak boundary condition framework from scalar advection-diffusion equations to the full Navier-Stokes equations, illustrating its versatility and robustness across incompressible and compressible flows, whether in traditional boundary-fitted, sliding-interface, or advanced immersogeometric applications.

0.46

ONE CYLinder: A Benchmark for Graph-Based Surrogate Modeling of Unsteady Bluff-Body Flows

cs.LG physics.flu-dyn ·2026-09-08 ·Théodore Michel, Antoine Campos, Alban Dujardin, Henry Areiza, Philippe Meliga +1 more
benchmark similarity 0.56
Abstract · pre-print

Graph-based surrogate models offer a promising route to accelerate computational fluid dynamics (CFD) simulations on unstructured meshes. However, their development is limited by the scarcity of benchmark datasets spanning multiple flow regimes and standardized protocols for long-horizon autoregressive prediction. We introduce ONECYL (ONE CYLinder), a new benchmark for unsteady flow past a circular cylinder across laminar, transitional, and high-Reynolds-number regimes. The benchmark comprises 450 high-fidelity Variational Multiscale finite-element simulations (270,000 flow snapshots) with randomized cylinder geometries, providing time-resolved velocity and pressure fields together with mesh connectivity, geometric descriptors, Reynolds numbers, and integrated aerodynamic quantities. Beyond the dataset, ONECYL establishes a unified evaluation framework combining full-field rollout errors, virtual probes, and drag and lift predictions to assess numerical accuracy and physical fidelity. To accompany the benchmark, we develop a Graph Transformer as a reference baseline predicting velocity and pressure fields autoregressively on unstructured meshes. Using ONECYL, we investigate geometric representations and physics-based regularization across the three Reynolds-number regimes. The results show that explicitly encoding the cylinder geometry through a level-set representation consistently improves long-horizon prediction accuracy and generalization to unseen geometries, while divergence-based regularization becomes increasingly beneficial as flow complexity increases. The ONECYL benchmark and its Graph Transformer baseline provide a reproducible framework for evaluating graph-based surrogate models and establish a foundation for future research on long-horizon prediction of unsteady bluff-body flows.

0.27

Physics-based Sphere Packing for Lagrangian Mesh Morphing

cs.GR cs.AI ·2026-10-06 ·Jiong Lin, Hod Lipson
unusual similarity 0.55
Abstract

This paper studies tetrahedral meshes as the body representation for differentiable simulation and computational design. Fixed-connectivity meshes degrade under large morphs, while remeshing from scratch discards node correspondence. We present JamTet, a physics-based sphere-packing framework for volumetric meshing and morphing. We contribute (i) a GPU-parallel mesher combining octree-hierarchical packing with constrained Delaunay tetrahedralization, producing more uniform element volumes than TetGen and fTetWild; (ii) Lagrangian mesh morphing that preserves interior-node identities by re-equilibrating the same spheres within changing shapes and rebuilding the boundary and connectivity, remaining inversion-free where fixed-connectivity and TetSphere meshes invert; and (iii) a differentiable GPU simulator in JAX, with mass-spring edges and a volumetric Neo-Hookean term, integrated with mesh morphing in a design pipeline. In soft-robot morphology design experiments, interior-node gradients improve swimming fitness by 0.73-1.07 over a matched surface-only variant, while voxelized versions of the same designs yield 32-63% lower fitness. These results establish sphere packing as a practical volumetric mesh representation for gradient-based shape optimization. Code and media: under review.

0.27

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.55
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04