CS Paper Radar

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu, Haisen Zhao, Lin Lu

cs.GR ·submitted 2026-10-17 04:58 UTC · v1

Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

Closest papers

Nearest neighbours by meaning across the whole index.

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.77
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

cs.GR ·2026-09-27 ·Yu Xing, Yang Liu, Lin Lu
published similarity 0.65
Abstract · This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer G…

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

0.38

Mesh2Shell Neural Operator for Inverse Shape Optimization

cs.LG ·2026-11-01 ·Xinyi Li, Xi Deng, Yubo Cao, Hudson Liu, Anima Anandkumar
similarity 0.61
Abstract

Physics-driven design seeks high-performing geometries, which need not conform to a learned shape category. Parametric and latent-space approaches facilitate surrogate-based optimization, but restrict deformations to prescribed shape families or learned decoders. We introduce the Mesh-to-Shell Neural Operator (M2S-NO) as the mesh-to-shell component of a category-agnostic inverse shape optimization framework. We separate the explicit mesh used for design from the volumetric representation used for physics prediction. M2S-NO maps oriented surface samples to a surface-centered shell representation, such as TruncatedSDF or HeatSDF. A separate problem-specific PDE neural operator (PDE-NO) maps this representation to physical fields. Objective gradients update mesh vertices through both operators, without a latent shape decoder. Preconditioning and remeshing support free-form deformation, while fixed interfaces are controlled directly on the mesh. Optional shell-space proposals enable topology changes. We evaluate geometric matching, jet-engine brackets, and neutron moderators, with independent FEM and OpenMC evaluation. Relative to the best training designs, M2S-NO reduces maximum bracket displacement by 14.3% and increases neutron-sensor current by 13.8%. Optimization also succeeds from an out-of-distribution bracket initialization, demonstrating the framework's geometric flexibility.

0.26

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.60
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.60
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.38

Synthetic Crystal Data Generation for Diffusion Pretraining in Material Property Prediction

cs.LG cond-mat.mtrl-sci ·2026-11-17 ·Aamod Varma, Shuyi Jia, Victor Fung
published similarity 0.59
Abstract · 14 pages, 2 figures, 6 tables. Accepted at the AI4Mat Workshop at NeurIPS 2026

Diffusion-based pretraining has emerged as a powerful strategy for learning transferable representations in graph neural networks for materials property prediction without requiring quantum-mechanical labels such as energies, forces, and stresses for every pretraining structure. However, the method retains a critical dependency: it requires structures residing near local minima of a potential energy surface, which have traditionally been obtained through costly DFT relaxations of known or physically synthesized compounds. This reliance constrains both the scale and the structural diversity of available pretraining data, leaving large regions of crystal structure space unexplored. In this work, we connect diffusion-based pretraining with synthetic structure generation to reduce this bottleneck. We introduce a synthetic data generation pipeline combining three complementary strategies: perturb-and-relax, generative sampling via MatterGen, and protostructure enumeration. Where structural relaxation is required, we use fast machine-learned interatomic potentials instead of performing a new DFT relaxation for each generated structure. We further compare a coordinate-denoising control with continuous-time variance-preserving (VP) and sub-VP diffusion objectives using a randomly initialized Orb-v2 backbone. The source comparison covers seven MatBench property-prediction tasks, and an eighth task, \texttt{mp\_gap}, is included in the protostructure scaling study. Every synthetic-pretraining condition numerically outperforms random initialization on all seven source-comparison tasks. Scaling the protostructure corpus from 20k to 165k under a fixed 400-epoch schedule numerically matches or exceeds MP-20k pretraining on most tasks; because this protocol increases both data diversity and optimization updates, the result reflects joint data-and-compute scaling.

0.29

LatticeRank: Spacing-Ranked Consistency for Native-Grid 3D Medical Image Segmentation

cs.CV ·2026-10-20 ·Jingjia Yan, Yue Zhuo, Zhonghua Xie
published similarity 0.59
Abstract · 14 pages, 6 figures. Accepted at MMM 2027

Variable voxel spacing changes more than image resolution: it alters the discrete sampling lattice, tensor geometry, and anatomical evidence available to a 3D segmentation network. While conventional pipelines restore images to a canonical grid, direct-grid deployment requires the model itself to tolerate these changes. We observe that candidate grids are not exchangeable views -- a coarse grid removes more structural information than a mildly resampled one -- yet standard consistency objectives assign them equal influence. We therefore propose LatticeRank, a training-only framework that aligns candidate posteriors in physical space and allocates consistency supervision by voxel-spacing order: among endpoint-matched candidates, the auxiliary loss concentrates on the coarsest requested grid, while inference retains a single network forward with no candidate branch or ensemble. On MSD Task04, LatticeRank improves coarse-grid Extra Dice over mean consistency by 0.03436 across five seeds while meeting the prespecified reference-grid noninferiority criterion. A controlled ladder shows that grid exposure provides the largest recovery, posterior consistency adds a second gain, and spacing-ranked allocation yields the strongest direct-grid result; requested spacing thus provides a simple, model-independent ordering signal for direct-grid consistency learning.

0.30

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.58
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43