CS Paper Radar

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

Yu Xing, Yang Liu, Lin Lu

cs.GR ·submitted 2026-09-27 14:16 UTC · v1
published

Abstract

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

Comment
This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer Graphics (2026): DOI: 10.3724/SP.J.1089.2026-00157
DOI
10.3724/SP.J.1089.2026-00157

Closest papers

Nearest neighbours by meaning across the whole index.

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.65
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.62
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

AcoustiPrint: Physics-Guided Neural Design of Manufacturable Acoustic Structures

cs.LG cs.AI ·2026-10-21 ·Shanmuka Sadhu, Harshvardhan C. Takawale, Yehia Zakaria, Ahmed Allam, Nirupam Roy
similarity 0.57
Abstract

Recent work in additive manufacturing and neural inverse design enables the creation of complex three-dimensional structures to manipulate physical fields, yet these designs must also adhere to discrete, non-differentiable fabrication constraints. Current methods limit the design space by imposing differentiable soft manufacturability loss penalties, or by fixing structures through post-processing, causing a discrepancy between the geometry optimized by the physics model and the final fabricated result. Thus, we present AcoustiPrint, a physics-informed neural architecture for constrained inverse design that represents three-dimensional geometries with an implicit neural representation (INR) and passes each candidate through a printability operator before evaluating its final response. The printability operator executes layer-wise self-support, discrete material selection, and whole-body connectivity, assuring fabrication feasibility. To allow for backpropagation through the discrete non-differentiable operations, we use surrogate gradients for the backward pass and a self-supervised printability objective that progressively drives the INR toward a valid design domain. We demonstrate AcoustiPrint for personalized transcranial focused ultrasound, where inter-patient differences in acoustic properties and head geometry deform wave propagation and requires patient-specific acoustic focusing. AcoustiPrint jointly optimizes three-dimensional geometry and material composition through differentiable wave physics while ensuring manufacturability. Experiments show manufacturable acoustic structures with enhanced focal accuracy and over density-based and phase-based baselines, demonstrating a generalized methodology for neural design through non-differentiable manufacturing constraints and differentiable physics.

0.23

CAST: Cast-Admissible Generative Design and Shape Optimization with Paired Depth Images

cs.LG ·2026-10-19 ·Jihoon Kim, Yongmin Kwon, Namwoo Kang
similarity 0.56
Abstract

Deep generative design can produce complex geometries, but unconstrained representations may create undercuts that prevent release from a two-part mold. We present CAST, which reformulates three-dimensional shape generation under a selected mold-opening constraint as a two-dimensional image generation problem using paired top and bottom depth images. Each valid depth pair defines one material interval along a selected mold-opening direction, so reconstructions exclude undercuts in that direction by construction. Diffusion models generate candidate shapes in this representation, and a finite element analysis (FEA) guided optimizer refines the same two boundaries. We evaluate diffusion-based generation with limited training data comprising 211 SimJEB bracket designs. On SimJEB brackets, FEA-guided refinement with a volume penalty reduced compliance in 193 of 200 generated candidates. The median reduction across all candidates was 36.8 percent in the optimization FEA model. Reconstruction of existing brackets revealed a mass--stiffness trade-off: filling occluded regions increased material volume and reduced displacement under the evaluated loads. Paired depth images thus connect generative exploration and structural refinement in a shared design space that preserves the selected pull-direction restriction.

0.24

Concurrent two-scale topology optimization of printable bone scaffolds via rectified-flow generation and exact latent-space refinement

cs.LG physics.comp-ph ·2026-10-18 ·Reza T Batley, Sourav Saha
benchmarkunusual similarity 0.55
Abstract

Bone scaffolds must reconcile a macroscale mechanical response with microscale geometric feasibility, yet conventional approaches to their design restrict attainable constitutive properties. This work presents a concurrent two-scale topology optimization framework; a conditional rectified flow generates periodic lattice microstructures, which are then refined in latent space by exact finite-element homogenization sensitivities. The resulting unit-cell geometries and their spatial assignments are jointly optimized under mechanical and feature-size constraints. In a distal rabbit femur benchmark, all eight flow-started refinements produce printable cells with maximum relative errors under 1\% across six prescribed engineering moduli. Constructing the implant from a single tiled cell reproduces intact whole-femur compliance within 0.1\% and regional strain energy within 0.35\% under four loading conditions. In human femoral reconstruction, multiscale concurrent optimization produces a cortical mid-shaft scaffold with porosity 63\% while satisfying the compliance constraint within 2\% under walking and stair-climbing loads. It achieves an 84\% porosity on a proximal cancellous scaffold with strain-energy deviations below 0.25\% under the same loads. Analysis of the learned representations reveals distinct architectural families in latent space. Further, the attention heads of the rectified-flow transformer specialize for spatial shifts -- learning the analogue of a finite-difference stencil -- and coordinate symmetries, with ablations showing their influence on generated topologies. These results establish a route to printable, mechanically constrained scaffold designs. The framework is general enough for extending to many other multiscale structural design applications including topology-microstructure co-design in metal additive manufacturing.

0.22

Topology-Stratified Materials Discovery with A Flow-Based Generative Model

cs.AI cond-mat.mtrl-sci ·2026-09-22 ·Jingyi Zhou, Oyshee Chowdhury, Noah Oyeniran, Chongze Hu
similarity 0.55
Abstract

Accurate generation of crystal structures is the foundation to the discovery of high-performance materials for extreme-environment applications, such as aerospace, additive manufacturing, and fusion energy systems. Although generative modeling has emerged as a promising approach for crystal design, its performance remains limited by the complex crystal structures and diverse chemical compositions. In this work, we develop UFO-MGen, a universal flow-based generative model that learns topological features of Wyckoff representations and leverages this information to accurately generate crystals across vast structural and chemical spaces. Compared with state-of-the-art generative models, UFO-MGen achieves the highest crystal generation success rate under a rigorous multi-stability evaluation framework, the highest SUN (stable, unique, novel) rate, and a remarkable extrapolation capability that has not been reported by previous models. Furthermore, a fine-tuning module is implemented to UFO-MGen for property-constrained crystal generation, enabling the inverse materials design toward target properties. The UFO-MGen opens a new avenue for accelerated materials discovery and providing a foundation for universal materials intelligence.

0.42

3D-VASE: Volumetric-Aware Scalable and Efficient Multi-Layer Design Synthesis for 3D-Printed Microfluidics

cs.ET ·2026-11-17 ·Yushen Zhang, Jiashuo Chen, Tsun-Ming Tseng, Ulf Schlichtmann
published similarity 0.54
Abstract · Accepted for publication in the 32nd Asia and South Pacific Design Automation Conference (ASP-DAC 2027)

Additive manufacturing (3D printing) enables complex multi-layer microfluidic devices, but the physical synthesis of passive-flow designs remains a key bottleneck. In such systems, designers must encode timing synchronization and target dosing directly into channel geometry, even though the available routing space across multiple 3D layers is often highly congested, which makes scaling to complex designs difficult. Existing approaches formulate placement, routing, and fluidic constraints as a single monolithic optimization, leading to combinatorial explosion and poor performance on complex designs. This paper presents a volumetric-aware two-stage synthesis framework that decouples global structure from routing detail. A Mixed-Integer Programming (MIP) model first computes a compact multi-layer placement, followed by a dynamic 3D routing engine that enforces timing and volumetric constraints during path construction. To further improve routability in dense layouts, we introduce a hierarchical conflict resolution strategy combining local rip-up-and-reroute with controlled global expansion. Experimental results show that, under timing and volumetric constraints, 3D-VASE consistently improves synthesis speed and, in most test cases, also improves layout quality. Notably, for difficult large-scale cases where prior methods often failed to return any solution within the time limit, 3D-VASE produces feasible high-quality layouts within practical runtimes. These advances enable fast, iterative design-space exploration for complex 3D-printed microfluidic systems.

0.32

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.53
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46