CS Paper Radar

CAST: Cast-Admissible Generative Design and Shape Optimization with Paired Depth Images

Jihoon Kim, Yongmin Kwon, Namwoo Kang

cs.LG ·submitted 2026-10-19 12:54 UTC · v1

Abstract

Deep generative design can produce complex geometries, but unconstrained representations may create undercuts that prevent release from a two-part mold. We present CAST, which reformulates three-dimensional shape generation under a selected mold-opening constraint as a two-dimensional image generation problem using paired top and bottom depth images. Each valid depth pair defines one material interval along a selected mold-opening direction, so reconstructions exclude undercuts in that direction by construction. Diffusion models generate candidate shapes in this representation, and a finite element analysis (FEA) guided optimizer refines the same two boundaries. We evaluate diffusion-based generation with limited training data comprising 211 SimJEB bracket designs. On SimJEB brackets, FEA-guided refinement with a volume penalty reduced compliance in 193 of 200 generated candidates. The median reduction across all candidates was 36.8 percent in the optimization FEA model. Reconstruction of existing brackets revealed a mass--stiffness trade-off: filling occluded regions increased material volume and reduced displacement under the evaluated loads. Paired depth images thus connect generative exploration and structural refinement in a shared design space that preserves the selected pull-direction restriction.

Closest papers

Nearest neighbours by meaning across the whole index.

STAMP: Manufacturing-Informed Generative Design and Shape Optimization of Sheet Panels

cs.LG ·2026-11-13 ·Jihoon Kim, Jun Hyeok Song, Wonho Ha, Namwoo Kang
similarity 0.64
Abstract · 25 pages, 11 figures, 7 tables, including supplementary material

Generative design of formed sheet panels must preserve geometric manufacturing conditions while exploring layouts and improving performance. STAMP embeds these conditions directly in the shape representation. Each panel is described by its material layout and a reference surface with one height at each occupied position in a plane perpendicular to the drawing direction. Nominal thickness is prescribed along the normal. The representation allows curved surfaces, ribs, and openings. It excludes reference-surface undercuts and keeps nominal thickness fixed without manufacturing penalty terms. Because these conditions belong to the representation, every generated and optimized panel satisfies them regardless of training-set size. Boundary-conditioned diffusion generates alternative layouts, and predictor gradients guide a surface optimization that retains outlines, openings, and designated fixed regions. We demonstrate STAMP on automotive hood inner panels using CarHoods10k. With a comparable number of stored values, depth maps reconstruct surfaces more accurately than point-cloud and voxel baselines. From only five training designs, one of three training runs yields novel and varied layouts. A generator trained on 500 designs, 6.5% of the training set, already reaches the layout variety of the full-data model. Across 11 held-out design families, predictor-based selection among existing dataset designs yields an average gap of 0.18 mm to the best available FEA deformation, versus an expected 1.59 mm for random selection. It does better than random selection in all 11 families. At a 10% depth-change bound, a network not used in the search predicts an average deformation reduction of 24.8% for six generated and existing panels, with a 3.2% average mass increase computed from geometry. Engineers can thus explore and optimize panels within this manufacturing-informed design space.

0.22

Generative AI-Driven Parametric Design Optimization Framework for Vehicle Closure Systems

cs.LG ·2026-11-16 ·Dongeon Lee, Yurim Lee, Jiyong Kim, Sanghyeon Kim, Sanghyun Lee +3 more
similarity 0.61
Abstract · 26 pages, 15 figures

This study presents a generative AI-driven parametric design optimization framework integrating performance-oriented generation with editable computer-aided design (CAD) and downstream computer-aided engineering (CAE) analysis for industrial vehicle closure systems. The framework is demonstrated on an automotive tailgate assembly with complex geometry, coupled components, and competing performance and feasibility requirements. A production-oriented CATIA model is restructured into a reference-based parametric template with a 13-dimensional design representation. An automated CAD/CAE workflow generates parametric models, performs structural analysis, and constructs a database of mass, maximum displacement, and maximum von Mises stress. Gaussian process regression surrogates predict performance, while diffusion and flow matching models generate design candidates. The design problem minimizes mass and maximum displacement, with stress assessed as an engineering feasibility constraint. Performance-guided generation using surrogate guidance and performance-aware training using a performance-aware loss incorporate engineering objectives, with sensitivity to guidance scale and loss weight evaluated. Generative search is compared with NSGA-II under matched evaluation budgets using a common surrogate model. Selected Pareto-region candidates are reconstructed in CATIA and re-evaluated through native CAE; all verified candidates are successfully regenerated and analyzed. Relative to the baseline, the knee-point design reduces mass by 7.1% and maximum displacement by 29.4%, while extreme verified solutions achieve maximum reductions of 10.3% and 37.3%, respectively. The results demonstrate performance-oriented multi-objective design exploration compatible with editable industrial CAD and native engineering verification.

0.32

Aerodynamic Shape Design Space Exploration with Deep Latent Diffusion Model

cs.CE ·2026-09-01 ·Zhen Wei, Edouard Dufour, Colin Pelletier, Michaël Bauerheim, Pascal Fua
publishedbenchmarkcode/datahot direction similarity 0.61
Abstract · This is the authors' postprint of the AIAA Journal article https://doi.org/10.2514/1.J066320. Data, code and agentic skill demo: https://git…

We propose DiffGeo, a latent space diffusion-based generative framework for aerodynamic design space exploration under extreme data scarcity. DiffGeo combines a learned latent space model for automatic shape parameterization, with a diffusion sampler to directly generate novel, geometry-valid and controllable designs. We validate the approach on a series of case studies: (i) a 2D airfoil generation benchmark, where DiffGeo's latent diffusion model is compared against GAN- and VAE-based baselines in terms of sample quality, diversity and constraint adherence under limited data; (ii) integration into a surrogate-based optimization pipeline, where DiffGeo's conditional sampling produces task-informed airfoil data that improve both surrogate modeling and optimization performance; and (iii) extension to 3D turbomachinery blade prototyping, where DiffGeo generates realistic and high-performance blade geometries from a small set of reference designs. Throughout these investigations, DiffGeo achieves high-quality and diverse shape generation with at least an order of magnitude less data than alternatives, decouples geometry representation from design targets for flexible reuse, and seamlessly incorporates complex design constraints via energy-based conditioning. These capabilities demonstrate DiffGeo's potential to enhance early-stage design by automating design space exploration--improving efficiency, expanding design diversity and embedding engineering knowledge through controllable guidance.

0.81

ConCAD: Constraint-Aware Image-to-CAD Generation with Dual-Granularity Rewards

cs.CV ·2026-09-28 ·Chenxi Zhai, Xi Cheng, Hang Cheng, Zhicheng Guan, Mingyu Fan +3 more
similarity 0.60
Abstract

Image-to-CAD generation seeks executable parametric programs that recover both the geometry and design intent of a reference object. Existing systems are commonly evaluated by validity and shape overlap, although two solids with similar volume can encode different CAD relations. We introduce ConCAD, a constraint-aware image-to-CAD framework optimized via Group Relative Policy Optimization (GRPO) with rewards at two complementary granularities: a code-level constraint reward and an execution-level geometric reward. This complementary design disambiguates structurally distinct yet volumetrically similar shapes while ensuring valid 3D geometry. To verify that these rewards recover geometry and design intent, we introduce a B-rep geometric constraint satisfaction rate (G-CSR), which analytically extracts and evaluates geometric constraints from boundary representations. Experiments on the DeepCAD and Zero2CAD demonstrate that ConCAD achieves the best IoU and Chamfer Distance over competitive baselines, while also outperforming them on G-CSR, validating its superior recovery of both geometric fidelity and parametric design intent.

0.14

AnchorGen: Anchored Optimization for Customizable Generative 3D Design

cs.CV ·2026-10-05 ·Hantao Zhang, Oliver Heinimann, Jieke Wu, Yingxuan You, Emilien Seiler +1 more
hot direction similarity 0.58
Abstract · 29 pages

Engineering design often starts from a 2D sketch that fixes style and proportions, yet the subsequent 3D shape optimization relies on learned generative priors to keep the geometry valid. However, these priors are agnostic to the sketch: while they admit a valid design by correcting a drifted proposal back to its training distribution, they often correct it towards the high-density region, ignoring the specified design. We introduce \emph{AnchorGen}, a rectified-flow framework trained unconditionally on the concatenated shape and sketch latents of paired data. The learned manifold represents the joint distribution of shape-sketch pairs, so constraining the sketch component restricts the iterate to the sub-manifold of shapes consistent with a target style. Since training employs no conditioning signal, the constraint is imposed at inference: gradient descent optimizes the shape latent to minimize a differentiable drag surrogate, while constraining the sketch latent to remain close to the target sketch via a token-wise cosine penalty. A single model thereby supports design-preserving optimization, dimensionally explicit design edits, and sketch-only synthesis.

0.33

Zero-shot rib design: merging training-free generative prior with topology optimization

cs.LG physics.app-ph ·2026-09-09 ·Yongmin Kwon, Namwoo Kang
published similarity 0.57
Abstract

Natural load-bearing patterns such as leaf venation, trabecular bone, and spider webs achieve high stiffness per unit mass, yet classical topology optimizers rarely reach such geometries, and few let engineers express structural design intent through natural language. This work treats a frozen text-to-image diffusion model as a training-free source of design knowledge and distills it into the physics loop of density-based topology optimization via score distillation sampling, so that a text prompt becomes an explicit, machine-interpretable representation of engineer intent. The prompt-induced generative gradient and the finite element sensitivity are combined at every iteration, letting physics decide which prompt-induced features survive. In 245 primary SDS runs spanning four geometric domains and two physics regimes, 38 of 49 prompt--domain combinations achieved statistically significant compliance reductions (up to $-31.5\%$ mechanical and $-23.0\%$ thermoelastic), outperforming gradient-based baselines. Cross-domain morphological analysis identifies a recurring structural signature of improvement: in most domains the generative prior suppresses dead-end branches in the rib skeleton, with endpoint--compliance correlation $r = +0.56$ to $+0.99$. A Heaviside projection with $β$-continuation resolves a pronounced intermediate-density tendency in this diffusion--physics coupling ($42.6\%$ to $<3\%$), and an automated skeleton-based pipeline converts optimized density fields into \rev{candidate geometry ready for computer-aided design. By retargeting the generative prior across domains, loading conditions, and physics objectives through a change of text prompt, with each new problem's physics setup specified separately, the framework uses a pretrained generative model as a reusable, training-free prior for engineering design.

0.59

ReGDiff: Guided Diffusion in Regulated Latent Space for Exploring Metamaterial Voxel Geometry

cs.CV cs.AI ·2026-09-28 ·Wangzhi Zhan, Jianpeng Chen, Dongqi Fu, Dawei Zhou
benchmarkcode/data similarity 0.57
Abstract

Metamaterials are artificially engineered structures whose mechanical and physical behaviors are strongly shaped by geometry rather than composition. Voxel representation provides a unified format for metamaterial geometry generation, as it can express diverse classes such as truss, shell, and porous structures within a single cubic discretization. However, voxel-based generation faces a plausibility-novelty trade-off: staying close to known geometries helps preserve geometric regularities, while moving away from them is necessary for novelty but may produce degenerate geometries. To address this challenge, we propose REGDIFF, a generative framework that couples voxel representation with latent space regulation and guided diffusion. REGDIFF introduces a repel-and-sink (RAS) mechanism to smooth the latent distribution of plausible geometries, and short-range repulsion (SRR) guidance to discourage generation overly close to known samples while maintaining geometric plausibility. We further contribute a voxel-based benchmark covering truss- and shell-type metamaterial geometries, together with an evaluation module for geometric plausibility, novelty, and diversity. Experiments show that REGDIFF outperforms voxel-based generative baselines, achieving +8.9% in geometric plausibility, +46.4% in novelty, and +128.6% in diversity on average across two datasets. These results suggest that REGDIFF is a strong geometry candidate generator for downstream evaluation. Our code is provided at https://github.com/wzhan24/ReGDiff.

0.43

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

cs.GR ·2026-09-27 ·Yu Xing, Yang Liu, Lin Lu
published similarity 0.56
Abstract · This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer G…

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

0.38