CS Paper Radar

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal

cs.CE ·submitted 2026-08-28 16:46 UTC · v1
benchmark

Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

Closest papers

Nearest neighbours by meaning across the whole index.

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.77
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.62
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.47

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

cs.GR ·2026-09-27 ·Yu Xing, Yang Liu, Lin Lu
published similarity 0.62
Abstract · This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer G…

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

0.38

Accelerating Atomistic-Continuum Simulations of Multilayer 2D Materials with Functional Principal Component Analysis-Based Machine Learning

cs.LG physics.comp-phmath-ph ·2026-11-13 ·Jonathan Oleson, Abhishek Keripale, Shashank Pathrudkar, Susanta Ghosh
similarity 0.61
Abstract

Atomistic-continuum simulations of complex wrinkling deformations in large-area multilayer two-dimensional (2D) materials are computationally expensive. To accelerate these simulations, this work presents a machine-learning (ML) framework that first constructs a low-dimensional representation of the deformation field, then learns the deformation in this reduced space. Dimensionality reduction of deformed 2D membranes is challenging because of the extremely high dimensionality of discretized deformation fields, the need to preserve surface continuity and prescribed geometric constraints, the stochastic nature of wrinkling patterns, and the limited availability of training data. We address these challenges using two-dimensional functional principal component analysis (FPCA). The proposed FPCA representation reduces deformation fields containing millions of degrees of freedom to latent spaces with only tens of dimensions while preserving the continuity of the deformed surface. In addition, prescribed homogeneous boundary constraints are satisfied exactly through an appropriate choice of basis functions in the FPCA representation. A neural network is then trained to predict the principal components from the system and loading parameters. The resulting ML-predicted deformation fields are used as high-quality initial configurations for the atomistic-continuum solver, which subsequently performs energy minimization to obtain equilibrium solutions. The framework is demonstrated for multilayer graphene subjected to uniaxial compression, biaxial compression, and combined biaxial compression and simple shear. For the most computationally intensive large-strain cases, the proposed approach achieves speedups of at least 6.8 times while converging to final energies comparable to, and in some cases lower than, those obtained using conventional atomistic-continuum initialization.

0.24

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.61
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.60
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58

Polyconvex neural-network surrogates with learned paired directional features for anisotropic hyperelastic homogenization

cs.LG physics.comp-phmath.NA ·2026-10-08 ·S. Ares de Parga, A. Cornejo, J. A. Hernández, R. Rossi
similarity 0.60
Abstract · 38 pages, 15 figures

Approximating the effective anisotropic hyperelastic response of a representative volume element (RVE) requires constitutive expressiveness, mechanical consistency, and computational efficiency. This work develops a polyconvex physics-augmented neural network (PANN) construction based on paired directional features whose orientations, stretch powers, and determinant exponents adapt to the RVE response. The features are composed with convex, componentwise nondecreasing cores, realized as an input-convex neural network (ICNN) or an input-convex Kolmogorov-Arnold network (ICKAN). The complete energies satisfy objectivity, an exactly stress-free reference, two-dimensional polyconvexity, and prescribed growth conditions by construction, and nonnegative energy is certified separately for the selected models. On a multicavity and a single-cavity periodic cell, these energies are compared with an Unconstrained energy, trained identically without the curvature and growth constraints, and with three hyperreduced projection-based reduced-order models (HPROMs), which serve as physics-based references. On the first cell, learning the features lowers the stress error sevenfold, and six features suffice on both. The constrained energies remain below one percent in stress error and in the displacement error of a tensile-coupon FE$^2$ application with a full-order reference, whereas the Unconstrained energy and the HPROMs are more accurate inside the data. Beyond the data, however, the Unconstrained energy loses rank-one convexity, and under confined compression it stops below half of the 500 MPa that the constrained energies reach. These results quantify what the guarantees cost in accuracy and what they secure beyond the data.

0.29

Scalable Bayesian Optimization for Efficient Exploration of Moire Patterns

cs.LG physics.app-ph ·2026-11-09 ·Panagiotis Krokidas, Christos Lazaridis, Vassilis Sioros, Efi-Maria Papia, Vassilios Constantoudis +1 more
benchmark similarity 0.59
Abstract

Large materials design spaces often contain rare high-performing configurations that are difficult to identify through trial-and-error exploration or purely representative machine-learning (ML) sampling. In this work, we present FruBO, a flexible Bayesian Optimization framework for accelerating the discovery of optimal configurations in computationally demanding materials design problems. As a case study, we investigate multilayer Moiré patterns generated by the superposition of six rotated hexagonal lattices, where the objective is to identify the rotational conformation that maximizes pore-size uniformity, quantified using the Jain fairness index. The resulting benchmark contains 600,000 unique configurations and exhibits a highly skewed objective distribution, making the global optimum difficult to locate by random sampling. We compare random exploration, Gaussian Process-based Bayesian Optimization, and Bayesian Optimization using a lightweight CatBoost surrogate with committee-based uncertainty estimation. Random sampling identifies the global optimum only after 533,012 evaluations, requiring approximately 31 hours, while Gaussian Process-based BO becomes impractical due to GPU memory exhaustion after 290 acquired samples. In contrast, FruBO with CatBoost identifies the global optimum after 1,470 acquired samples and approximately 1.15 hours. These results demonstrate that scalable surrogate models can substantially improve the feasibility and efficiency of BO in large nanomaterials design spaces.

0.25