CS Paper Radar

Polyconvex neural-network surrogates with learned paired directional features for anisotropic hyperelastic homogenization

S. Ares de Parga, A. Cornejo, J. A. Hernández, R. Rossi

cs.LG physics.comp-phmath.NA ·submitted 2026-10-08 23:15 UTC · v1

Abstract

Approximating the effective anisotropic hyperelastic response of a representative volume element (RVE) requires constitutive expressiveness, mechanical consistency, and computational efficiency. This work develops a polyconvex physics-augmented neural network (PANN) construction based on paired directional features whose orientations, stretch powers, and determinant exponents adapt to the RVE response. The features are composed with convex, componentwise nondecreasing cores, realized as an input-convex neural network (ICNN) or an input-convex Kolmogorov-Arnold network (ICKAN). The complete energies satisfy objectivity, an exactly stress-free reference, two-dimensional polyconvexity, and prescribed growth conditions by construction, and nonnegative energy is certified separately for the selected models. On a multicavity and a single-cavity periodic cell, these energies are compared with an Unconstrained energy, trained identically without the curvature and growth constraints, and with three hyperreduced projection-based reduced-order models (HPROMs), which serve as physics-based references. On the first cell, learning the features lowers the stress error sevenfold, and six features suffice on both. The constrained energies remain below one percent in stress error and in the displacement error of a tensile-coupon FE$^2$ application with a full-order reference, whereas the Unconstrained energy and the HPROMs are more accurate inside the data. Beyond the data, however, the Unconstrained energy loses rank-one convexity, and under confined compression it stops below half of the 500 MPa that the constrained energies reach. These results quantify what the guarantees cost in accuracy and what they secure beyond the data.

Comment
38 pages, 15 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Universal neural network approximation of symmetric polyconvex energies and envelopes

cs.CE math.NAcs.LG ·2026-10-23 ·Florian Gammer
theory similarity 0.70
Abstract

Symmetric polyconvexity provides a sufficient condition for weak lower semicontinuity in small-strain elasticity and a tractable lower bound for the relaxation of non-(quasi)convex energies. Since classical algorithms for computing such functions can be computationally expensive, neural network approximations have recently emerged as an alternative. A central difficulty with establishing such neural network based approaches for symmetric polyconvexity is the additional monotonicity property. As we show, the corresponding weight restrictions on ReLU-based input-convex networks do not yield universal approximation of the lifted representers. Here, we introduce symmetric polyconvex neural networks (SPCNNs) for constitutive modeling and approximation of symmetric polyconvex envelopes. The deep architecture combines convexity with the monotonicity required of a representer in the space of minors. We prove a universal approximation theorem for symmetric polyconvex energies, without requiring isotropy, and quantify the number of affine pieces attainable by the lifted network and derive reduced architectures for isotropic energies. Numerical examples illustrate stress-based regression and approximation of the symmetric polyconvex envelope of a double-well potential. Symmetric polyconvexity is guaranteed by construction, while the accuracy of the fitted energies and envelopes is assessed numerically.

0.21

Variational Functional Neural Networks (vfNN)

cs.LG cond-mat.soft ·2026-11-02 ·Chinmay Katke, C. Nadir Kaplan
benchmark similarity 0.63
Abstract · 11 pages, 4 figures. Version submitted for peer review

We present a variational functional neural network (vfNN) algorithm that optimizes physically motivated continuum functionals in integral form (e.g., Lagrangian, Hamiltonian, or free energy) to find the states of a system. That way, vfNN bypasses solving the equations of motion (a.k.a. the Euler-Lagrange equations), which are in the form of differential equations. To this end, our approach is fundamentally different from conventional physics-informed neural networks (PINN) that solve differential equations by minimizing a phenomenological loss function involving higher order derivatives and ad hoc weight factors. In contrast, vfNN merely evaluates lower order derivatives of the generating functional and replaces the weight factors with rigorous physical scales. This also fundamentally changes the loss landscape, and the desired solutions may become unstable. For this emergent nonconvex optimization problem, we develop a quasi-Newton optimization algorithm with simulated annealing that converges to the solutions of the corresponding Euler-Lagrange equations of the functional regardless of their stability properties. Our simulations using vfNN give accurate results for benchmark systems governed by linear or nonlinear ordinary differential equations.

0.28

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.63
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

Hyperreduction accelerates finite element model updating for the discovery of neural materials

cs.CE cs.AI ·2026-10-22 ·Hagen Holthusen, Matthias Knipper, Kevin Linka
similarity 0.61
Abstract · 42 pages, 23 figures, 1 table

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

0.28

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.60
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.59
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

Thermodynamically consistent neural constitutive models for elastoplasticity via eigen-representations

cs.CE ·2026-11-09 ·Harikrishnan Vijayakumaran, Shunyu Yin, Martin Abendroth, Miguel A. Bessa, Karl A. Kalina
theory similarity 0.59
Abstract

Neural network material models can represent yield surfaces and hardening laws with far more flexibility than classical closed-form plasticity formulations, but training such a model end-to-end through an implicit return map introduces non-trivial challenges. This work presents a thermodynamically consistent neural constitutive model for rate-independent, isotropic elastoplasticity that jointly learns a flexible yield function together with its evolution laws. For non-associative flow, the yield function extends the convex flow potential by a jointly trained additive term, which renders the model thermodynamically consistent by construction. Isotropy and convexity are enforced simultaneously across all learnable components through a permutation-invariant, spectral (eigenvalue-based) representation. Training proceeds through a backward-Euler return map, with gradients propagated by the implicit function theorem together with an eigenvalue-degeneracy-aware scheme for safe differentiation. The robustness and generality of the approach are demonstrated by reproducing known constitutive models, including non-associative flow, learning material behavior from stress--strain data extracted from a full-field finite element simulation, and capturing unknown non-associative behavior from homogenized representative volume elements of a foam. Finally, the proposed neural plasticity model is evaluated within finite element simulations to solve boundary-value-problem under plane stress.

0.27

Hessian-Informed Conformation Augmentation for Potential Energy Surface Curvature in Machine Learning Interatomic Potentials

cs.LG physics.chem-ph ·2026-09-04 ·Bumju Kwak, Jeonghee Jo
code/data similarity 0.58
Abstract · 51 pages including Supporting Information, with 9 figures and 7 tables in the main text. Code available at https://github.com/fromjade/Hessi…

While machine-learning interatomic potentials (MLIPs) have successfully learned potential energy surfaces (PES) and atomic forces, many practical applications, such as vibrational analysis and transition state search, rely heavily on the PES Hessian. Yet standard MLIPs are trained on energy and forces only, and using the Hessian as an additional training objective requires backpropagation whose memory cost grows quadratically with the number of atoms. To address these limitations, we propose two Hessian-derived data augmentation schemes: isotropic Gaussian displacement (\textbf{UniAug}) and normal mode-weighted displacement (\textbf{ModeAug}). Both methods utilize simple Taylor expansions, generating physically grounded molecular structures with highly accurate energy and force labels. By preserving the underlying MLIP architecture and training procedure, this approach contributes to improving energy and force predictions in various benchmarks. Comprehensive evaluations across non-equilibrium and equilibrium datasets demonstrate that our approach enhances model accuracy where reference forces are large and training data are limited.

0.49