CS Paper Radar

Hyperreduction accelerates finite element model updating for the discovery of neural materials

Hagen Holthusen, Matthias Knipper, Kevin Linka

cs.CE cs.AI ·submitted 2026-10-22 14:13 UTC · v1

Abstract

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

Comment
42 pages, 23 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.64
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

Benchmarking data-driven material models on the classic Treloar dataset

cs.AI cs.CE ·2026-08-14 ·Hagen Holthusen, Moritz Flaschel, Denisa Martonová, Ellen Kuhl
benchmarkcode/data similarity 0.63
Abstract · 27 pages, 8 figures, 7 tables

Machine learning is rapidly reshaping constitutive modeling, offers new ways to learn material behavior directly from experimental data, and challenges long-established modeling paradigms. But with a growing number of machine-learning-based approaches available, how do they compare in practice? In this paper, we use the classic experimental data of Treloar to benchmark popular frameworks for hyperelasticity: (Generalized-Invariant) Constitutive Artificial Neural Networks, Physics-Augmented Neural Networks, (Adaptive) Material Fingerprinting, and Efficient Unsupervised Constitutive Law Identification & Discovery. We compare their fitting performance, computational cost, hyperparameter sensitivity, and ease of implementation. Furthermore, we discuss the trade-offs between predictive accuracy and model complexity. The latter is assessed by quantifying both the number of material parameters in the discovered models and the computational time required to evaluate the constitutive model and its derivatives. The results show that all methods can reproduce the benchmark data remarkably well. Rather than identifying a single winner, we highlight the strengths and limitations of each approach and provide practical guidance for their use. The source code for all six methods, including the training and comparison scripts, as well as all results and data used in this study, is publicly available via https://doi.org/10.5281/zenodo.21915635.

0.26

Reduced-Order Physics-Informed Neural Network with Adaptive Basis Refinement for Structural Identification

cs.CE physics.comp-ph ·2026-08-17 ·Rui Zhang, Konstantinos Vlachas, Eleni Chatzi
similarity 0.62
Abstract

Physics-informed neural networks (PINNs) provide a flexible framework for solving forward and inverse problems. However, their direct application to structural dynamics remains limited by high system dimensionality and model-form errors arising from incomplete physics. Reduced-order models (ROMs) can alleviate the dimensionality bottleneck, yet existing PINN-ROM couplings typically rely on fixed reduced subspaces, target forward simulations, or assume complete physics, restricting their use for inverse identification under parametric variability or incomplete system knowledge. To address these limitations, this work proposes a Reduced-Order Physics-Informed Neural Network (RO-PINN) framework with adaptive basis refinement for structural identification under known and incomplete physics. Via projection, reduced governing equations are embedded directly into the PINN loss, facilitating learning in a low-dimensional latent space. An adaptive scheme updates the projection basis during training so that the latent space is progressively realigned with evolving structural parameters or learned residual restoring forces. This realignment reduces basis-mismatch errors and limits their influence on the inferred residual force. The method is validated on a four-story steel frame with nonlinear hysteretic braces under sparse and noisy measurements. Results show parameter identification comparable to or more accurate than Bayesian model updating with lower computational cost in the considered cases, recovery of unmodeled nonlinear restoring forces under incomplete physics, and joint identification of residual restoring forces and structural parameters within the same framework. Overall, RO-PINN provides a unified framework for structural identification by integrating reduced-order modeling, adaptive basis refinement, and physics-informed learning within a single formulation.

0.34

Polyconvex neural-network surrogates with learned paired directional features for anisotropic hyperelastic homogenization

cs.LG physics.comp-phmath.NA ·2026-10-08 ·S. Ares de Parga, A. Cornejo, J. A. Hernández, R. Rossi
similarity 0.61
Abstract · 38 pages, 15 figures

Approximating the effective anisotropic hyperelastic response of a representative volume element (RVE) requires constitutive expressiveness, mechanical consistency, and computational efficiency. This work develops a polyconvex physics-augmented neural network (PANN) construction based on paired directional features whose orientations, stretch powers, and determinant exponents adapt to the RVE response. The features are composed with convex, componentwise nondecreasing cores, realized as an input-convex neural network (ICNN) or an input-convex Kolmogorov-Arnold network (ICKAN). The complete energies satisfy objectivity, an exactly stress-free reference, two-dimensional polyconvexity, and prescribed growth conditions by construction, and nonnegative energy is certified separately for the selected models. On a multicavity and a single-cavity periodic cell, these energies are compared with an Unconstrained energy, trained identically without the curvature and growth constraints, and with three hyperreduced projection-based reduced-order models (HPROMs), which serve as physics-based references. On the first cell, learning the features lowers the stress error sevenfold, and six features suffice on both. The constrained energies remain below one percent in stress error and in the displacement error of a tensile-coupon FE$^2$ application with a full-order reference, whereas the Unconstrained energy and the HPROMs are more accurate inside the data. Beyond the data, however, the Unconstrained energy loses rank-one convexity, and under confined compression it stops below half of the 500 MPa that the constrained energies reach. These results quantify what the guarantees cost in accuracy and what they secure beyond the data.

0.29

Universal neural network approximation of symmetric polyconvex energies and envelopes

cs.CE math.NAcs.LG ·2026-10-23 ·Florian Gammer
theory similarity 0.61
Abstract

Symmetric polyconvexity provides a sufficient condition for weak lower semicontinuity in small-strain elasticity and a tractable lower bound for the relaxation of non-(quasi)convex energies. Since classical algorithms for computing such functions can be computationally expensive, neural network approximations have recently emerged as an alternative. A central difficulty with establishing such neural network based approaches for symmetric polyconvexity is the additional monotonicity property. As we show, the corresponding weight restrictions on ReLU-based input-convex networks do not yield universal approximation of the lifted representers. Here, we introduce symmetric polyconvex neural networks (SPCNNs) for constitutive modeling and approximation of symmetric polyconvex envelopes. The deep architecture combines convexity with the monotonicity required of a representer in the space of minors. We prove a universal approximation theorem for symmetric polyconvex energies, without requiring isotropy, and quantify the number of affine pieces attainable by the lifted network and derive reduced architectures for isotropic energies. Numerical examples illustrate stress-based regression and approximation of the symmetric polyconvex envelope of a double-well potential. Symmetric polyconvexity is guaranteed by construction, while the accuracy of the fitted energies and envelopes is assessed numerically.

0.21

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.60
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.59
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

cs.CE math.NA ·2026-09-02 ·Joaquín A. Hernández, S. Ares de Parga, Riccardo Rossi
benchmark similarity 0.59
Abstract · 49 pages, 22 figures, 6 tables

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

0.43