CS Paper Radar

Reduced-Order Physics-Informed Neural Network with Adaptive Basis Refinement for Structural Identification

Rui Zhang, Konstantinos Vlachas, Eleni Chatzi

cs.CE physics.comp-ph ·submitted 2026-08-17 21:06 UTC · v1

Abstract

Physics-informed neural networks (PINNs) provide a flexible framework for solving forward and inverse problems. However, their direct application to structural dynamics remains limited by high system dimensionality and model-form errors arising from incomplete physics. Reduced-order models (ROMs) can alleviate the dimensionality bottleneck, yet existing PINN-ROM couplings typically rely on fixed reduced subspaces, target forward simulations, or assume complete physics, restricting their use for inverse identification under parametric variability or incomplete system knowledge. To address these limitations, this work proposes a Reduced-Order Physics-Informed Neural Network (RO-PINN) framework with adaptive basis refinement for structural identification under known and incomplete physics. Via projection, reduced governing equations are embedded directly into the PINN loss, facilitating learning in a low-dimensional latent space. An adaptive scheme updates the projection basis during training so that the latent space is progressively realigned with evolving structural parameters or learned residual restoring forces. This realignment reduces basis-mismatch errors and limits their influence on the inferred residual force. The method is validated on a four-story steel frame with nonlinear hysteretic braces under sparse and noisy measurements. Results show parameter identification comparable to or more accurate than Bayesian model updating with lower computational cost in the considered cases, recovery of unmodeled nonlinear restoring forces under incomplete physics, and joint identification of residual restoring forces and structural parameters within the same framework. Overall, RO-PINN provides a unified framework for structural identification by integrating reduced-order modeling, adaptive basis refinement, and physics-informed learning within a single formulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Linearized PINN with pretrained nonlinear layers

cs.LG math.AP ·2026-09-14 ·Wenhao Chen, Alexandre M. Tartakovsky
similarity 0.72
Abstract

We propose a linearized Physics-Informed Neural Network (lPINN), a reduced-order neural basis method for forward and inverse differential equations. In an offline stage, lPINN learns operator-compatible continuous neural basis functions from an ensemble of numerical solutions. The basis functions are differentiable through automatic differentiation and are pretrained using solution data together with either derivative information or physics residuals. For each new problem instance, the basis functions are frozen and the solution is obtained by minimizing the governing-equation residual together with applicable initial, boundary, regularization, and observational terms. Unlike surrogate and operator-learning methods, the training data define the trial space offline, while the instance-specific solution is computed online by enforcing the governing physics. Relative to vanilla PINNs, lPINN pretrains the nonlinear hidden-layer representation offline and performs online inference only in the final linear layer. We evaluate lPINN on forward and inverse problems for the advection-diffusion equation, Burgers' equation, and the nonlinear pendulum equation. Compared with vanilla PINNs, lPINN achieves lower solution and parameter errors while reducing online inference times by approximately one to more than three orders of magnitude, with the largest gains generally observed for limited residual or measurement data. Cross-resolution experiments show that the learned continuous representation can be evaluated on finer meshes without retraining and with nearly unchanged accuracy.

0.22

Physics-Informed Error Field Learning: A Post-Training Optimization Framework for Physics-Informed Neural Networks

cs.LG ·2026-08-25 ·Jiuyun Sun, Yong Zhang
similarity 0.68
Abstract

Physics-Informed Neural Networks (PINNs) have emerged as an important class of numerical methods for solving partial differential equations (PDEs). However, during the late-stage optimization process, further parameter updates often yield diminishing accuracy improvements while increasing computational costs. To address this issue, this paper proposes a Physics-Informed Error Field Learning (PIEFL) framework for PINNs. Unlike conventional approaches that continuously approximate the solution field using a single network, PIEFL introduces an auxiliary error network after the primary network achieves satisfactory accuracy and shifts the learning objective from the solution field to the error field. By deriving error control equations under physical constraints, the error network learns the discrepancy between the current approximation and the exact solution, and the learned error correction is combined with the primary prediction to improve solution accuracy. The proposed framework avoids continuous optimization of the entire solution space and focuses computational resources on correcting existing prediction errors. Moreover, PIEFL requires no modification to the primary network architecture, making it compatible with existing PINN models and applicable as a general post-training optimization strategy. Numerical experiments on representative PDEs demonstrate that PIEFL achieves higher solution accuracy under the same computational budget, validating its effectiveness in improving the performance of PINNs.

0.19

Adaptive Physics-Informed Neural Networks for the Blasius Boundary-Layer Problem

cs.LG physics.flu-dyn ·2026-08-28 ·Mehari Fentahun Endalew, Xiaoming John Zhang
benchmark similarity 0.67
Abstract · 25 pages

Physics-informed neural networks (PINNs) provide a mesh-free approach for solving differential equations, but their performance can depend strongly on loss weighting, collocation placement, and optimization strategy. This study develops an adaptive PINN framework for the Blasius boundary-layer equation using gradient-norm-based adaptive loss weighting, nonuniform and residual-based collocation, and sequential Adam--L-BFGS optimization. In the representative run using the architecture $[1,100,100,1]$, the model predicts $f''(0)=0.3320762918$, compared with the high-accuracy benchmark $0.332057336215$, giving an absolute error of $1.896\times10^{-5}$. The final weighted loss is $6.789\times10^{-8}$, and the predicted stream-function, velocity, and shear profiles agree closely with an independent numerical boundary-value solution. A separate full-training architecture study shows that the two-hidden-layer model achieves the smallest wall-shear error among the four tested architectures, $1.629\times10^{-6}$, whereas the deepest network attains the smallest weighted objective but a substantially larger wall-shear error. Compared with the previously reported PINN value $f''(0)=0.33165$, the representative run reduces the wall-shear error by approximately a factor of $21.5$. The results show that the combined adaptive training framework can achieve high accuracy for the Blasius problem and that weighted loss alone is insufficient for identifying the most physically accurate PINN. Because the adaptive components are applied jointly, their individual contributions cannot be isolated from the present results and would require a controlled ablation study for separate assessment.

0.22

Equation informed time reparametrization for physics informed neural networks

cs.CE ·2026-10-30 ·Orestis Belokas, Christoforos Rekatsinas
similarity 0.65
Abstract · 25 figures, 4 tables

Physics Informed Neural Networks offer a mesh-free approach to solving differential equations, but their application to time-dependent problems remains challenging, particularly when the governing dynamics involve widely different time scales. With collocation points spread uniformly in time, short intervals of rapid change are under resolved. This work introduces an equation informed time reparameterization framework that modifies the temporal coordinate used during PINN training based on the local dynamics of the governing equation. The proposed method follows a two stage procedure. First, a pilot PINN training provides an approximate solution, which is used to linearize the governing differential operator and estimate its local response to small perturbations. These responses are combined into a time-dependent rate function, large where the dynamics are fast, that defines a strictly increasing transformation from physical time to a new computational time coordinate. A second PINN is then trained on the transformed governing equation, with uniformly sampled collocation points in the new coordinate producing a nonuniform distribution in physical time. Different combination rules and spatial reduction strategies are considered. With the cost of the pilot training included, the method reduces the error by a factor of 4 to 29 relative to the best alternative method on the Kachanov Rabotnov creep-damage model near rupture, and by a factor of 5 to 16 relative to every alternative method on the Frank-Kamenetskii equation near blow up.

0.08

DeSyR: A decoupled symbolic recovery framework for PDEs with PINN-guided structure discovery and physics-based coefficient refinement

cs.LG ·2026-09-01 ·Pancheng Niu, Jun Guo, Qiaolin He, Jingcai Guo, Yanchao Shi
similarity 0.64
Abstract · 51 pages, 10 figures

Recovering explicit symbolic solutions of partial differential equations (PDEs) from physics-informed neural networks (PINNs) is attractive, yet selecting and fitting expressions against neural predictions can lock the recovered solution into the teacher's approximation error. We propose DeSyR (Decoupled Symbolic Recovery) to break this dependence. DeSyR uses PINNs only to discover candidate structures and initial coefficient estimates; once a structure is fixed, the governing equations and constraints alone determine the refined coefficients. Multiple candidates with different fitting-error--complexity trade-offs are retained, evaluated after physics-only refinement, and reduced to the simplest expression within a physically near-optimal set. Joint refinement extends the same principle to coupled fields. For fixed candidate parameterizations, affine error identities and local nonlinear analysis show how teacher errors enter fitted coefficients and establish conditions under which physical residuals control coefficient and solution errors. Across seven benchmarks covering scalar evolution equations, multidimensional elliptic problems and coupled incompressible flows, DeSyR attains mean relative solution errors on the order of $10^{-14}$ or smaller and lower reported mean physical residuals than PINNs, physics-informed symbolic networks and teacher-fitted symbolic distillation. With the expression structure held fixed, estimating coefficients from physical constraints further yields more accurate frequency estimates and solutions than fitting teacher predictions. DeSyR therefore turns neural approximations into guides for structure discovery, while physical constraints determine the final explicit solution.

0.12

Physics-Informed Stochastic Configuration Machine: A Backpropagation-Free Neural Network with Fast Training for Nonlinear Differential Equations

cs.AI math.NAcs.LGeess.SY ·2026-08-27 ·Yuehao Song, Zhong Chen, Lihui Cen, Liang Wu, Kai Zhang
similarity 0.63
Abstract · 17 pages, 4 figures

While Physics-Informed Neural Networks (PINNs) have emerged as a transformative paradigm for solving complex differential equations, their reliance on backpropagation-based gradient descent and automatic differentiation (AD) imposes significant computational bottlenecks and severe non-convex optimization challenges. To overcome these fundamental limitations, we propose the Physics-Informed Stochastic Configuration Machine (PI-SCM), a novel backpropagation-free framework for both forward and inverse problems in differential equations. The core mathematical contribution lies in the analytical evaluation of local Jacobians for nonlinear differential operators, which facilitates a linearized representation of the physical loss and projects it into a unified, linearized algebraic subspace. This reformulation allows for the explicit determination of optimal network weights via a sequence of generalized linear least squares solvers, effectively bypassing the iterative traps of traditional nonlinear optimizers. We develop a progressive algorithmic suite comprising localized construction (PI-SC-I), sliding-window updating (PI-SC-II), and global updating (PI-SC-III), and rigorously establish their universal approximation properties. Extensive experiments demonstrate that PI-SCM achieves high-fidelity predictive accuracy and robust parameter identification while accelerating the training process by orders of magnitude compared to standard PINNs. Our work provides a highly efficient and scalable foundation for next-generation, real-time Scientific Machine Learning applications.

0.13

Equidistribution of Solution Gradients in Physics-Informed Neural Networks via Coordinate Transformations

cs.AI math.NAcs.LG ·2026-11-06 ·Tianchi Yu, Ivan Oseledets
similarity 0.63
Abstract

Physics-Informed Neural Networks (PINNs) often struggle to approximate solutions with sharp gradients due to optimization difficulties and spectral bias. Motivated by the principle of gradient equidistribution from the stretching approach in grid generation, which redistributes solution gradients to reduce functional complexity, we propose Coordinate Transformation PINNs (CTPINNs), which incorporate learnable coordinate transformations to map the physical domain into a computational domain where the physical solutions become approximately affine, making them easier for neural networks to learn. We propose two constructions of the transformation: an explicit construction based on Majorants and an implicit construction based on invertable neural networks. Experimentally, the explicit construction can improve accuracy for PDEs with available explicit coordinate transformations, and the implicit construction can be combined with other advanced PINN models as an efficient plug-in module to improve performance across a range of challenging PDE benchmarks.

0.21

Hyperreduction accelerates finite element model updating for the discovery of neural materials

cs.CE cs.AI ·2026-10-22 ·Hagen Holthusen, Matthias Knipper, Kevin Linka
similarity 0.62
Abstract · 42 pages, 23 figures, 1 table

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

0.28