CS Paper Radar

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

Joaquín A. Hernández, S. Ares de Parga, Riccardo Rossi

cs.CE math.NA ·submitted 2026-09-02 18:40 UTC · v1
benchmark

Abstract

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

Comment
49 pages, 22 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.62
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Hyperreduction accelerates finite element model updating for the discovery of neural materials

cs.CE cs.AI ·2026-10-22 ·Hagen Holthusen, Matthias Knipper, Kevin Linka
similarity 0.59
Abstract · 42 pages, 23 figures, 1 table

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

0.28

A hyper-reduction strategy for elastoplastic hydro-mechanical problems in partially saturated soil

cs.CE math.NA ·2026-10-27 ·Alba Muixí, Lluís Monforte, Antonio Rodríguez-Ferran, Sergio Zlotnik
similarity 0.53
Abstract

This work proposes a hyper-reduced order model for coupled hydro-mechanical simulations of elastoplastic deformation and water flow in partially saturated soils. These simulations are used to monitor and assess the safety of geotechnical structures such as earthfill dams, where calibration, uncertainty quantification and scenario analysis require solving the same transient model many times for different parameter values. The displacement and the pore pressure are approximated in a field-split reduced basis obtained by proper orthogonal decomposition, and the Galerkin-projected equations are integrated with decomposed cubature rules, one per balance equation, built with the energy-conserving sampling and weighting (ECSW) method. Each residual is split into an affine part and a nonlinear correction: the affine part is computed exactly, at negligible online cost, so that the cubature rule only needs to approximate the correction, which is localized in space. The construction is independent of the constitutive model choices and is implemented in FEniCSx by assembling the original variational forms on the small set of elements selected by ECSW. The method is tested on two- and three-dimensional dams retaining tailings and water, simulating a raise of the dam and the subsequent consolidation phase, with the friction angle, stiffness and hydraulic conductivity of the dam material and the height of the raise as varying parameters. The hyper-reduced model reproduces the displacement and pressure fields with errors below $0.5\%$ with respect to the finite element solution, achieving speed-ups of up to $43\times$ in two dimensions and $77\times$ in three. These performance gains grow with the extent of the plastic yielding, and the selected elements concentrate in the plastified and unsaturated zones, whose size is set by the physics rather than by the mesh resolution.

0.25

Love Handles: Decimation for Deformation Handles with Compact Support and Low Memory Footprints

cs.GR ·2026-08-18 ·David IW Levin, Paul Kry, Kartic Subr, Ryan Schmidt, Etienne Vouga +1 more
similarity 0.52
Abstract

Estimating the deformation of solids via physical simulation is an important problem spanning fields such as computer animation, engineering and robotics. Such simulations are computationally expensive and scale poorly when the representation of an object is refined by increasing the level of discretization. Reduced Order Methods (ROM) offer computational savings by decreasing the number of degrees of freedom, for example by using \emph{handles} that control groups of vertices. We present the first decimation-based algorithm for computing a sparse, compactly supported set of deformation handles. The crux of our method utilizes iterative algebraic simplification to optimize handle deformation to match any input deformation, such as linear vibration modes. This applies to any volumetric input mesh, including those with high genus or porous features, since we do not alter the geometry. We also devise an efficient algorithm to compute and update compact supports and their associated weights. We leverage compact support to develop an efficient, reduced-cubature computation scheme. Once optimized, our handles offer a memory-efficient solution while enabling real-time elastodynamics simulation of complex geometry. We show real-time performance on a variety of tetrahedral meshes with up to 796,623 tetrahedra.

0.23

Parameter-Free Zeroth-Order Optimization with Ellipsoidal Sampling

cs.LG math.OC ·2026-09-29 ·Alexander Sholokhov, Alexander Rogozin
theory similarity 0.52
Abstract

Zeroth-order optimization methods are essential for solving black-box problems where gradient information is unavailable or expensive to compute. This paper presents POEM-ES, a novel parameter-free stochastic zeroth-order algorithm that extends the recent POEM method by integrating subspace preconditioning with ellipsoidal randomized sampling. In contrast to traditional zeroth-order approaches that rely on isotropic random directions, POEM-ES performs anisotropic sampling guided by a fixed structural symmetric positive semi-definite (SPSD) preconditioner $\hatΣ$ that encodes the underlying low-dimensional geometry. Under a standard structural spectral normalization where $λ_{\max}(\hatΣ) = 1$, we introduce the use of the empirical effective dimension $d^* = \operatorname{tr}(\hatΣ)$, which reflects the intrinsic dimensionality of the problem and guides both the sampling and randomized smoothing parameter schedules. In practice, such a preconditioner can be effectively obtained via pilot sampling, historical trajectories, or domain-specific expert knowledge. We prove that POEM-ES achieves a dimension-reduced convergence rate under low-rank structural assumptions, requiring only $\tilde{\mathcal{O}}\left( \frac{\left( r^2 κ(\hatΣ) + d^* \right) L^2 D_{\mathcal{X}}^2}{\varepsilon^2} \right)$ stochastic zeroth-order oracle queries. The method remains fully parameter-free and demonstrates significant improvements over the original POEM in problems with low-rank structure where $d^* \ll d$. Numerical experiments on hinge-loss binary classification tasks using LibSVM datasets confirm the practical superiority of the proposed approach.

0.27

Reduced order modeling for micromorphic computational homogenization of mechanical metamaterials with patterning fluctuation fields

cs.CE ·2026-09-29 ·Theron Guo, Ondřej Rokoš
similarity 0.51
Abstract

Mechanical metamaterials owe some of their exotic effective properties to microstructural instabilities such as buckling and pattern transformation. Their fine-scale geometry, combined with the interplay of local and nonlocal effects, renders direct numerical simulation (DNS) prohibitively expensive, if not intractable. Micromorphic computational homogenization~\citep{Rokos2019} has been proposed to make macroscopic simulations feasible: a representative volume element (RVE) carrying patterning fluctuation fields resolves the microscale, while an effective micromorphic continuum describes the macroscale. Such simulations nevertheless remain costly, since the RVE problem and its associated tangent problems must be solved at every macroscopic integration point, which becomes prohibitive, especially in three dimensions. We therefore propose a reduced order model for the microscopic problem, combining proper orthogonal decomposition with a hyperreduction method tailored to the micromorphic setting. Two numerical examples quantify the reduced basis and hyperreduction errors and discuss the offline costs and attainable online speed-ups. The results show that this approach can enable engineering-scale large deformation analysis of mechanical metamaterials.

0.27

Synthetic Dataset Generation, Physical Consistency and Active Learning for Shape-Informed Surrogate Modeling of Hemodynamics

cs.CE physics.flu-dyn ·2026-10-19 ·Francesco Romor, Richard Schussnig, Charles A. Taylor, Gerhard A. Holzapfel, Alfonso Caiazzo
similarity 0.50
Abstract

Model order reduction has the potential to enable real-time patient-specific assessment of cardiovascular flows. However, it still faces significant challenges stemming from the geometric variability of vascular anatomies. Building upon the SynthAorta dataset (Bosnjak et al., IEEE Trans. Med. Imag. 45(1), 2026) of physiological aortic geometries, we generate an extensive dataset of physiologically consistent computational fluid dynamics solutions through an automatic boundary-condition adjustment procedure. A common reference geometry allows all patient-specific anatomies to be represented by displacement fields, providing point-to-point correspondence without the need for geometric registration. Based on this dataset, we develop Graph U-Net and Transformer U-Net surrogate models to predict velocity and pressure fields at peak systole. We further investigate two strategies to enhance data efficiency and prediction accuracy: active learning and differentiable physical consistency constraints based on the finite element residual. The results show that active learning is strongly regime-dependent: while it offers little benefit over random sampling during early training, it improves performance during fine-tuning through gradient- and subspace-based acquisition strategies. Similarly, physical consistency constraints prove to be substantially more effective as a fine-tuning objective than as a regularizer applied throughout training. Finally, out-of-distribution studies demonstrate that the primary limitation of surrogate models lies in the geometric support of the underlying parametrization rather than in the neural network architectures themselves. The proposed framework combines synthetic dataset generation, geometry-aware surrogate modeling, physics-informed optimization, and active learning into a scalable workflow for inter-patient hemodynamic prediction.

0.03

Probabilistic Meshless Methods on Manifolds

cs.LG stat.ML ·2026-10-29 ·Federico Pavesi, Noémie Jaquier, Antonio Candelieri
similarity 0.49
Abstract

Probabilistic meshless methods solve partial differential equations (PDEs) by placing a Gaussian process prior on the solution and conditioning it on the PDE at a finite set of collocation nodes. The posterior provides both an approximation of the solution and a Bayesian quantification of its error. While these methods are well established on Euclidean domains, their extension to manifolds lacks, to our knowledge, any convergence analysis. We extend them to compact manifolds and study their convergence in two settings. First, for known manifolds whose Laplace-Beltrami eigenpairs are available, the prior can be evaluated exactly, but the PDE operator generally cannot be applied to it in closed form. We replace this operator by a standard generalized finite difference discretization on a point cloud sampled from the manifold, and show that the resulting method is consistent at the points of the cloud, at a rate governed by their fill distance. Second, for implicit manifolds, known only through a point cloud, both the prior and the operator must be approximated. We propose a new generalized finite difference scheme with a free stencil radius, and show that it retains the consistency of the standard construction while controlling the growth of its coefficients, and that an appropriate radius yields uniform convergence of the discrete Gram matrix. In both settings, we derive error bounds for the posterior mean which separate the collocation error intrinsic to the method from the error due to approximating the operator and, for implicit manifolds, the prior. Experiments on the circle, the sphere and the flat torus confirm our theoretical claims. On real-world cortical thickness data, our approach attains the accuracy of established discretizations, while conditioning on fewer than a tenth of the observations and providing a credible interval at every vertex.

0.26