CS Paper Radar

A hyper-reduction strategy for elastoplastic hydro-mechanical problems in partially saturated soil

Alba Muixí, Lluís Monforte, Antonio Rodríguez-Ferran, Sergio Zlotnik

cs.CE math.NA ·submitted 2026-10-27 11:26 UTC · v1

Abstract

This work proposes a hyper-reduced order model for coupled hydro-mechanical simulations of elastoplastic deformation and water flow in partially saturated soils. These simulations are used to monitor and assess the safety of geotechnical structures such as earthfill dams, where calibration, uncertainty quantification and scenario analysis require solving the same transient model many times for different parameter values. The displacement and the pore pressure are approximated in a field-split reduced basis obtained by proper orthogonal decomposition, and the Galerkin-projected equations are integrated with decomposed cubature rules, one per balance equation, built with the energy-conserving sampling and weighting (ECSW) method. Each residual is split into an affine part and a nonlinear correction: the affine part is computed exactly, at negligible online cost, so that the cubature rule only needs to approximate the correction, which is localized in space. The construction is independent of the constitutive model choices and is implemented in FEniCSx by assembling the original variational forms on the small set of elements selected by ECSW. The method is tested on two- and three-dimensional dams retaining tailings and water, simulating a raise of the dam and the subsequent consolidation phase, with the friction angle, stiffness and hydraulic conductivity of the dam material and the height of the raise as varying parameters. The hyper-reduced model reproduces the displacement and pressure fields with errors below $0.5\%$ with respect to the finite element solution, achieving speed-ups of up to $43\times$ in two dimensions and $77\times$ in three. These performance gains grow with the extent of the plastic yielding, and the selected elements concentrate in the plastified and unsaturated zones, whose size is set by the physics rather than by the mesh resolution.

Closest papers

Nearest neighbours by meaning across the whole index.

A $u$-$p_w$ SPH framework with mechanical-hydraulic boundary treatment in GeoDualSPHysics for large-deformation geomechanics

cs.CE ·2026-10-18 ·Yangfan Ma, Bin Su, Zheng Han, Changze Li, Mitsuteru Asai
similarity 0.58
Abstract · 23 pages, 11 figures, 6 tables

Pore-water pressure changes the effective stress and deformation of saturated geomaterials, while skeleton deformation generates pressure and drives drainage. Resolving this feedback together with hydraulic boundary conditions is necessary for simulations that connect consolidation to large post-failure movement. This paper presents a hydromechanical extension of GeoDualSPHysics using a single-layer displacement-pore-water-pressure ($u$-$p_w$) smoothed particle hydrodynamics (SPH) framework. An explicit pressure-rate equation combines volumetric compression and Darcy diffusion, and the resulting pore pressure feeds back into the skeleton momentum balance. The implementation extends the existing modified dynamic boundary condition (mDBC) infrastructure to carry hydraulic ghost values alongside mechanical boundary data. Prescribed pressure at drained surfaces is combined with impermeable walls and impermeable loaded contacts, with separate control of loading and drainage activation. The formulation is assessed through one-dimensional consolidation, two-dimensional flexible-strip loading, and the three-dimensional Cryer problem. The Cryer simulations reproduce the non-monotonic central pressure response over four Poisson ratios, with normalized pressure root-mean-square errors of 0.012-0.030. The consolidation tests also expose remaining settlement and late-time pressure discrepancies. Applications to 5 m and 8 m sensitive-clay slopes illustrate sequential retrogressive failure and large deformation. The contribution is the integration of hydraulic feedback and boundary handling within GeoDualSPHysics; the results establish an initial verification basis while identifying remaining accuracy and convergence questions.

0.31

Hyperreduction accelerates finite element model updating for the discovery of neural materials

cs.CE cs.AI ·2026-10-22 ·Hagen Holthusen, Matthias Knipper, Kevin Linka
similarity 0.53
Abstract · 42 pages, 23 figures, 1 table

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

0.28

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.53
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Dimensional hyperreduction of nonlinear finite element models via empirical cubature with manifold-adaptive weights

cs.CE math.NA ·2026-09-02 ·Joaquín A. Hernández, S. Ares de Parga, Riccardo Rossi
benchmark similarity 0.53
Abstract · 49 pages, 22 figures, 6 tables

Nonlinear-manifold reduced-order models for parametrized finite element problems can achieve substantial compression both in the number of generalized (latent) coordinates and, through sampling-and-weighting hyperreduction, in the number of sampled elements/integration points. Yet current sampling-and-weighting approaches employ weights that remain fixed over the solution manifold. We contend that this restriction leaves hyperreduction potential untapped: allowing the weights to vary continuously and nonlinearly with the latent coordinates can further decrease the number of sampled spatial entities. To exploit this possibility, we propose the Manifold-Adaptive-Weight Empirical Cubature Method (MAW-ECM). Starting from a feasible fixed-weight ECM rule, a greedy pruning strategy removes sampled entities through convex quadratic weight-redistribution problems enforcing local conditions and positivity. The method is assessed on two nonlinear benchmarks: homogenization of a metamaterial unit cell exhibiting negative incremental stiffness, and a history-dependent continuum-damage problem. In both cases, the nonlinear manifold is constructed from an initial linear compression followed by an input-informed identification of the latent coordinates as general linear combinations of the retained modal amplitudes, incorporating graph information when relevant to seek the intrinsic dimensionality of the solution manifold. We show that combining the nonlinear-manifold representation with MAW-ECM reduces the number of sampled integration points by more than two orders of magnitude relative to the corresponding standard linear reduced model. Relative to the fixed-weight manifold models alone, the adaptive weights eliminate approximately 80% of the remaining points in the homogenization benchmark and more than 97% in the damage benchmark, while essentially preserving their accuracy.

0.43

A Local Stabilized Isogeometric Formulation with Discontinuous Pressure for Mesh-Conforming and Immersed Analysis of Nearly Incompressible Elasticity

cs.CE math.NA ·2026-10-26 ·Ashkan Ali Madadi, Thomas J. R. Hughes
similarity 0.49
Abstract

Nearly incompressible materials arise in soft tissues, elastomers, gels, and other soft solids. Yet, numerical modeling remains challenging because displacement-based formulations can exhibit volumetric locking near incompressibility. Mixed displacement-pressure formulations address this difficulty but require compatible approximation spaces satisfying the inf-sup condition. In mixed formulations, discontinuous pressure spaces are attractive since pressure degrees of freedom can be condensed locally. In high-order isogeometric analysis, however, their Galerkin stability requires pressure-grid coarsening that increases with polynomial degree. Here, we develop a variational multiscale (VMS) stabilized mixed isogeometric formulation that retains this locality while substantially relaxing the restriction. The key observation is that VMS stabilization controls nonconstant elementwise pressure modes and is unconditionally stable with respect to its parameter, provided the elementwise constant pressure component satisfies the inf-sup condition. Consequently, for maximally continuous displacement splines, a pressure grid coarsened by a factor of two satisfies the constant-mode inf-sup criterion independently of polynomial degree. Local condensation then yields a displacement-only system, facilitating use in existing displacement solvers. The formulation is further extended to immersed isogeometric analysis with extended B-splines, pressure-cell aggregation, subdivision-based cut-cell quadrature, and weak enforcement of essential boundary conditions. Discrete inf-sup studies and convergence analyses in the Kirsch and Cook's membrane benchmarks demonstrate stability and show that the immersed treatment preserves mixed stability properties. The proposed framework therefore provides a local, high-order, and robust approach for nearly incompressible problems in mesh-conforming and immersed settings.

0.26

BRIDGE: Bridging Routine Inputs and Digital modelling for Geotechnical Engineering

cs.CE ·2026-10-02 ·Roshan Philip Saji, Waleed El-Sekelly, Tarek Abdoun, Mostafa E. Mobasher
similarity 0.49
Abstract

The mechanical properties needed for geotechnical design require laboratory tests and are thus available for far fewer field samples than routinely measured basic (index) properties which are available for nearly every sample. We term this difference as the characterization gap. Purely data-driven models do not explicitly enforce physical laws and may be unreliable beyond their training domain, while direct constitutive calibration preserves physical consistency but requires advanced laboratory data and expert judgment. We therefore propose BRIDGE (Bridging Routine Inputs and Digital modelling for Geotechnical Engineering) a modular framework that predicts mechanical properties from routinely available basic properties. BRIDGE screens the dataset for outliers and non-physical responses, bins the retained samples into Cells, and selects a small calibration dataset from each Cell, while the remaining samples are used for validation. A mechanical model is then calibrated for each calibration sample, and the converged calibrations collectively define the mechanical surrogate of the Cell together with its parameter ranges and the corresponding predictive envelope in the mechanical property space. A Cell is validated when most validation samples fall within this envelope, whereupon the surrogate can predict the mechanical property ranges of new samples whose basic properties lie within the Cell. In this work, we adopt a finite element implementation of the Extended Cam-Clay (ECC) constitutive model as the mechanical model, whose four parameters are calibrated in a multi-stage process. Applied to the Tokyo-CLAY/14/67760 database, BRIDGE predicts the mechanical properties of an entire Cell from calibrations of just 10 to 20% of its samples. Finally, since the mechanical model, the binning criteria, and the sampling method are components of BRIDGE, the framework is easily extensible.

0.25

Observer-based parameter estimation in a Darcy model towards dam internal seepage monitoring with validation on real data

eess.SY ·2026-11-09 ·Andrea Ferretti, Gildas Besançon, Emmanuel Robbe
publishedunusual similarity 0.47
Abstract

This paper addresses internal seepage monitoring in hydraulic infrastructures through the estimation of physical parameters in a distributed model. A physics-based approach relying on Darcy's law is adopted to describe the spatiotemporal evolution of hydraulic head within the structure. To enable real-time applicability, a Proper Orthogonal Decomposition (POD) is employed to derive a reduced-order model of the underlying partial differential equation. An Extended Kalman Filter (EKF) is then designed to perform online estimation of the hydraulic diffusivity, a key parameter related to the structural state. The proposed method is validated directly on real measurement data through a twofold approach. First, the estimated parameter is compared with the value obtained via offline batch optimization performed on the same dataset, showing consistent results. Second, the ability of the resulting model, parametrized by the estimated diffusivity, to reconstruct the observed measurements is assessed, to evaluate its suitability for seepage monitoring.

0.46

Seismic Site Response Prediction from Sparse Observations Using Finite-Element-Pretrained Latent Dynamics

cs.LG ·2026-09-17 ·Yi Zhu, Su Chen, Xiaojun Li
similarity 0.47
Abstract

Numerical site-response predictions often deviate from observations, yet correcting these discrepancies is difficult because records are limited in both sensor coverage and number of events. This study proposes the Transfer-Enabled Forced Latent Autoencoder for Response Equations (FLARE-T) to improve these predictions by learning and calibrating low-dimensional latent dynamics that connect the base acceleration input to acceleration outputs at multiple depths. FLARE-T learns a low-dimensional response manifold and input-driven dynamics from dense finite-element simulations. It then trains a sparse encoder to map simulated sensor responses into the learned coordinates and uses limited records to calibrate the dynamics within them. A short response window initializes each prediction, while the complete base motion drives the response. The framework was evaluated using a layered-soil centrifuge test and the Lotung field vertical array. Test-set results show that FLARE-T improved multi-depth acceleration histories and 5%-damped pseudoacceleration response spectra relative to the original finite-element models, reducing errors at every evaluated sensor for motions of different intensities and, at Lotung, for both horizontal components. Two Lotung source models with different constitutive parameters achieved comparable test-set accuracy, indicating reduced dependence on precise prior calibration. FLARE-T therefore provides a data-efficient means of combining dense numerical response information with limited field records to improve future site-response predictions.

0.25