CS Paper Radar

A Local Stabilized Isogeometric Formulation with Discontinuous Pressure for Mesh-Conforming and Immersed Analysis of Nearly Incompressible Elasticity

Ashkan Ali Madadi, Thomas J. R. Hughes

cs.CE math.NA ·submitted 2026-10-26 22:16 UTC · v1

Abstract

Nearly incompressible materials arise in soft tissues, elastomers, gels, and other soft solids. Yet, numerical modeling remains challenging because displacement-based formulations can exhibit volumetric locking near incompressibility. Mixed displacement-pressure formulations address this difficulty but require compatible approximation spaces satisfying the inf-sup condition. In mixed formulations, discontinuous pressure spaces are attractive since pressure degrees of freedom can be condensed locally. In high-order isogeometric analysis, however, their Galerkin stability requires pressure-grid coarsening that increases with polynomial degree. Here, we develop a variational multiscale (VMS) stabilized mixed isogeometric formulation that retains this locality while substantially relaxing the restriction. The key observation is that VMS stabilization controls nonconstant elementwise pressure modes and is unconditionally stable with respect to its parameter, provided the elementwise constant pressure component satisfies the inf-sup condition. Consequently, for maximally continuous displacement splines, a pressure grid coarsened by a factor of two satisfies the constant-mode inf-sup criterion independently of polynomial degree. Local condensation then yields a displacement-only system, facilitating use in existing displacement solvers. The formulation is further extended to immersed isogeometric analysis with extended B-splines, pressure-cell aggregation, subdivision-based cut-cell quadrature, and weak enforcement of essential boundary conditions. Discrete inf-sup studies and convergence analyses in the Kirsch and Cook's membrane benchmarks demonstrate stability and show that the immersed treatment preserves mixed stability properties. The proposed framework therefore provides a local, high-order, and robust approach for nearly incompressible problems in mesh-conforming and immersed settings.

Closest papers

Nearest neighbours by meaning across the whole index.

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.58
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.39

A review of weakly enforced Dirichlet boundary conditions in computational flow analysis

cs.CE math.NAphysics.flu-dyn ·2026-09-06 ·Ming-Chen Hsu, Monu Jaiswal, Yuri Bazilevs
survey similarity 0.57
Abstract

Strongly enforced Dirichlet boundary conditions require highly refined near-wall meshes to resolve steep velocity and thermal gradients. This introduces high computational costs, especially for practical flow simulations. Weakly enforced boundary conditions alleviate this burden by acting as a variationally consistent near-wall model. By allowing a controlled slip at the solid wall, weak enforcement recovers accurate flow quantities on coarse boundary-layer meshes across both incompressible and compressible regimes. Furthermore, weak boundary conditions serve as the fundamental enabling technology for immersogeometric analysis. Because the weak operator evaluates boundary integrals independently of the background mesh, high-fidelity flow analysis can be performed directly on complex geometries without fitting a mesh to the surface. This capability has facilitated direct geometry-to-analysis workflows for boundary-representation CAD models, raw point clouds, photogrammetric reconstructions, and segmented medical images. This review examines the unified mathematical development of the weak boundary condition framework from scalar advection-diffusion equations to the full Navier-Stokes equations, illustrating its versatility and robustness across incompressible and compressible flows, whether in traditional boundary-fitted, sliding-interface, or advanced immersogeometric applications.

0.46

N -phase flow simulations using X-Mesh and an explicit marker interface representation

cs.CE math.NA ·2026-11-10 ·Antoine Quiriny, Jonathan Lambrechts, Michel Henry, Nicolas Moës, Jean-François Remacle
similarity 0.55
Abstract · Keywords: Multiphase flow; X-Mesh; Front tracking; Finite element method; Topology change; Surface tension

We present a marker-based X-Mesh framework for incompressible N-phase flow simulations with sharp, explicitly tracked interfaces. The interface is represented by Lagrangian marker chains, while the computational mesh is deformed so that selected mesh edges conform to the tracked geometry without changing mesh connectivity. This combination preserves the advantages of body-fitted finite element discretizations while allowing highly distorted and nearly degenerated elements to capture fine interfacial features on relatively coarse meshes without requiring mesh refinement. The arbitrary Lagrangian-Eulerian (ALE) finite element solver uses a pressure field that is continuous within each phase and discontinuous across the fitted interface. Surface tension is introduced through a variational membrane, so the pressure jump is resolved without prescribing a curvature-dependent correction; a Young wall energy provides the corresponding treatment of fluid-fluid-solid triple points. Topological changes are handled geometrically from the marker representation. Numerical experiments illustrate the ability of the approach to transport complex interfaces and to control topology changes through marker-based feature-size criteria.

0.31

JAXIGA - A software framework for GPU-enabled and differentiable isogeometric analysis

cs.MS math.NA ·2026-10-06 ·Cosmin Anitescu, Yongjie Jessica Zhang
benchmarkcode/dataunusual similarity 0.54
Abstract

In this paper, we present JAXIGA, an open-source library for isogeometric analysis based on JAX. The library separates the construction of the mesh from the computations which are traced for compilation and differentiation. This allows geometry evaluation, assembly and the supported solvers to be combined in a just-in-time compiled program, for which first-order reverse-mode derivatives can be computed. We consider three numerical methods obtained from a single pointwise energy density. The Galerkin and energy-minimization methods use the same discrete potential and have the same stationary points, while collocation enforces the corresponding strong form. The sensitivities of a converged solution are obtained by solving one adjoint problem, and their accuracy depends on the tolerances of both the primal and adjoint problems. We also describe hierarchical extraction for local refinement of the variational methods and the use of smooth spline spaces for fourth-order problems. The numerical results are compared with analytical solutions and independent FEniCSx and JAX-FEM computations. For the reported GPU benchmark with 36,448 unknowns, assembly is twenty-four times faster than on the host CPU. When the conjugate-gradient solver is also run on the GPU, the total solution time is reduced from 31.8 to 1.38 seconds, and the result agrees with the direct solution to $5\times10^{-11}$. These results show that the choice of solver and the reuse of compilation are important for obtaining an overall reduction in computational cost.

0.35

Semi-Implicit Pairwise Descent for Nonlocal Continuum Mechanics

cs.GR ·2026-09-09 ·Xukun Luo, Xiao Cheng, Yuzhong Guo, Ying Qiao, Wencheng Wang +1 more
published similarity 0.54
Abstract

We propose Semi-Implicit Pairwise Descent (SIPD), a unified nonlocal pairwise framework for simulating large-scale hyperelastic materials involving complex contact and friction. By reformulating the Finite Element Method (FEM) equations of motion into a pairwise force representation from a nonlocal perspective, our approach avoids costly Hessian computations, leading to a reduction in per-iteration computational overhead. Furthermore, we propose an analytical projection strategy for projecting our Hessian-free coefficient matrices to positive semi-definiteness. And we treat contact and friction as a unified anisotropic elastic energy, allowing for a seamless integration into the elastic solver framework. We mathematically prove that our method is unconditionally stable and numerically convergent.Experimental results demonstrate that SIPD achieves real-time performance for million-scale simulations even under intricate contact and friction conditions.

0.37

Nodal discontinuous Galerkin methods for non-ideal equations of state: pressure equilibrium preservation and entropy correction

cs.CE math.NA ·2026-08-14 ·Jesse CHan, Hendrik Ranocha, Raymond Park, Joshua Lampert, Eric Ching +1 more
similarity 0.50
Abstract

Structure-preserving discontinuous Galerkin (DG) methods typically improve the robustness of high order simulations of real fluids. In addition to conservation, key structures include the preservation of pressure equilibrium and satisfaction of at least one entropy inequality. In this work, we investigate conservative discretizations using exactly pressure equilibrium conserving (EPEC) and approximately pressure equilibrium conserving (APEC) flux differencing DG formulations, as well as entropy stable formulations through the use of minimally dissipative corrections for non-ideal equations of state (EOS). We introduce an analysis of EPEC schemes and a new procedure for designing such fluxes based on a generalization of Tadmor's shuffle condition. We also analyze APEC DG schemes and show that the incorporation of dissipative interface penalization terms does not significantly increase pressure equilibrium errors, especially at higher orders of approximation. Finally, we observe that when combined with APEC flux differencing formulations, entropy correction improves robustness for under-resolved solutions and long-time simulations.

0.41

Reformulating plastic instabilities within a damage-like variational framework

cs.CE cond-mat.mtrl-sci ·2026-10-02 ·Baptiste Reyne
similarity 0.50
Abstract · 21 pages, 3 figures

Yield point phenomena in metals, anticracks in soils and snows, or planewise collapses in lattice metamaterials, are different manifestations of plastic instabilities characterized by stress softening and strain localization. Several independent constitutive descriptions exist and suffer from similar challenges: experimental difficulties to link local events to global measurements, and computational lack of convergence, spurious localization and mesh sensitivity. This work proposes a minimal field-agnostic constitutive framework where plastic softening is represented by a damage-like internal variable which explicitly separates stable hardening behavior from unstable softening. The resulting formulation admits a variational structure and can leverage regularization tools originally developed by the ductile fracture community. The framework aims at emphasizing similarities within plastic instability phenomena and establishing a bridge with continuum damage mechanics, to open a path towards regularized variational formulations of localized plastic flows.

0.29

Accurate wall shear stress in immersed flow analysis with application to point cloud-based CFD

cs.CE math.NAphysics.flu-dyn ·2026-09-21 ·Monu Jaiswal, Ming-Chen Hsu
similarity 0.49
Abstract

Point cloud-based CFD enables flow analysis directly on discrete points obtained from 3D scanning and medical imaging, bypassing surface reconstruction, geometry cleanup, and boundary-fitted mesh generation. Derived from immersogeometric analysis, the method immerses the point cloud in a background mesh and enforces no-slip conditions on discrete points through a Nitsche-based weak boundary condition (BC). The framework delivers accurate velocity fields, pressure distribution, and integrated loads; however, accurate prediction of the local wall shear stress (WSS) has remained a critical challenge. The geometry intersects the background mesh arbitrarily, producing cut elements that lack the regularity required for consistent gradient evaluation. The issue is compounded by the stabilization term of the weak BC, whose parameter estimation in the symmetric Nitsche formulation is dependent on the cut configuration and affects the variationally consistent definition of traction from which the WSS is computed. In this work, we propose a new method to obtain accurate wall shear stress in immersed flow analysis with application to point cloud-based CFD, using a non-symmetric Nitsche's formulation with near-wall modeling and a patch-based stress recovery approach with traction compatibility. The method is validated on canonical benchmarks and applied to turbulent flow past a sphere and to a patient-specific aorta, showcasing excellent agreement with reference results.

0.13