CS Paper Radar

A $u$-$p_w$ SPH framework with mechanical-hydraulic boundary treatment in GeoDualSPHysics for large-deformation geomechanics

Yangfan Ma, Bin Su, Zheng Han, Changze Li, Mitsuteru Asai

cs.CE ·submitted 2026-10-18 10:57 UTC · v1

Abstract

Pore-water pressure changes the effective stress and deformation of saturated geomaterials, while skeleton deformation generates pressure and drives drainage. Resolving this feedback together with hydraulic boundary conditions is necessary for simulations that connect consolidation to large post-failure movement. This paper presents a hydromechanical extension of GeoDualSPHysics using a single-layer displacement-pore-water-pressure ($u$-$p_w$) smoothed particle hydrodynamics (SPH) framework. An explicit pressure-rate equation combines volumetric compression and Darcy diffusion, and the resulting pore pressure feeds back into the skeleton momentum balance. The implementation extends the existing modified dynamic boundary condition (mDBC) infrastructure to carry hydraulic ghost values alongside mechanical boundary data. Prescribed pressure at drained surfaces is combined with impermeable walls and impermeable loaded contacts, with separate control of loading and drainage activation. The formulation is assessed through one-dimensional consolidation, two-dimensional flexible-strip loading, and the three-dimensional Cryer problem. The Cryer simulations reproduce the non-monotonic central pressure response over four Poisson ratios, with normalized pressure root-mean-square errors of 0.012-0.030. The consolidation tests also expose remaining settlement and late-time pressure discrepancies. Applications to 5 m and 8 m sensitive-clay slopes illustrate sequential retrogressive failure and large deformation. The contribution is the integration of hydraulic feedback and boundary handling within GeoDualSPHysics; the results establish an initial verification basis while identifying remaining accuracy and convergence questions.

Comment
23 pages, 11 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

A hyper-reduction strategy for elastoplastic hydro-mechanical problems in partially saturated soil

cs.CE math.NA ·2026-10-27 ·Alba Muixí, Lluís Monforte, Antonio Rodríguez-Ferran, Sergio Zlotnik
similarity 0.58
Abstract

This work proposes a hyper-reduced order model for coupled hydro-mechanical simulations of elastoplastic deformation and water flow in partially saturated soils. These simulations are used to monitor and assess the safety of geotechnical structures such as earthfill dams, where calibration, uncertainty quantification and scenario analysis require solving the same transient model many times for different parameter values. The displacement and the pore pressure are approximated in a field-split reduced basis obtained by proper orthogonal decomposition, and the Galerkin-projected equations are integrated with decomposed cubature rules, one per balance equation, built with the energy-conserving sampling and weighting (ECSW) method. Each residual is split into an affine part and a nonlinear correction: the affine part is computed exactly, at negligible online cost, so that the cubature rule only needs to approximate the correction, which is localized in space. The construction is independent of the constitutive model choices and is implemented in FEniCSx by assembling the original variational forms on the small set of elements selected by ECSW. The method is tested on two- and three-dimensional dams retaining tailings and water, simulating a raise of the dam and the subsequent consolidation phase, with the friction angle, stiffness and hydraulic conductivity of the dam material and the height of the raise as varying parameters. The hyper-reduced model reproduces the displacement and pressure fields with errors below $0.5\%$ with respect to the finite element solution, achieving speed-ups of up to $43\times$ in two dimensions and $77\times$ in three. These performance gains grow with the extent of the plastic yielding, and the selected elements concentrate in the plastified and unsaturated zones, whose size is set by the physics rather than by the mesh resolution.

0.25

Verification, Sensitivity, and Operating Limits of a GPU-Accelerated Planar WCSPH Model for Hydrodynamic Ram

cs.CE math.NAphysics.flu-dyn ·2026-08-26 ·Md Mujahid Alam, Debojit Biswas, Sukanta Chakraborty
similarity 0.53
Abstract · 47 pages, 12 figures

Hydrodynamic ram (HRAM) loading remains a persistent challenge in impact mechanics, less due to exotic physics than to the difficulty of achieving convincing quantitative agreement in reduced-order representations. Prevailing studies typically employ a single mesh and boundary treatment validated against one experimental dataset, leaving unresolved whether agreement reflects genuine fidelity or compensating discretization errors. This work presents a planar 2D, GPU-accelerated WCSPH solver employing an Adami-type ghost-particle boundary condition, extended for the first time to a moving, decelerating disk penetrating a confined liquid channel at ballistic velocity. The boundary condition is examined against a purpose-derived potential-flow added-mass solution and the analytical acoustic reflection coefficient at the steel-water interface; this exploration reveals that the stiff equation of state and cavitation cutoff impose identifiable delineation of the solver's operating regime on quantitative agreement. A three-point resolution convergence study reveals a non-monotone near-probe pressure peak, attributed to a bounded ghost-fluid density inconsistency. A comprehensive coefficient sweep, conservation diagnostics, and O(N) GPU throughput scaling enable exhaustive characterization impractical in 3D. Qualitative comparison against literature evidence at 900 and 600m/s clarifies load bearing versus approximate elements. Notably, energy diagnostics reveal a modest total energy growth over the simulated window, with the fluid absorbing disproportionately more energy than the projectile relinquishes - an instructive signature of prescribed, non-back-reacting projectile kinematics that helps map the formulation's operating envelope. The resulting solver, while confined to planar geometry, delivers verified, convergence-checked performance well suited for rapid parametric design exploration.

0.32

A Local Stabilized Isogeometric Formulation with Discontinuous Pressure for Mesh-Conforming and Immersed Analysis of Nearly Incompressible Elasticity

cs.CE math.NA ·2026-10-26 ·Ashkan Ali Madadi, Thomas J. R. Hughes
similarity 0.48
Abstract

Nearly incompressible materials arise in soft tissues, elastomers, gels, and other soft solids. Yet, numerical modeling remains challenging because displacement-based formulations can exhibit volumetric locking near incompressibility. Mixed displacement-pressure formulations address this difficulty but require compatible approximation spaces satisfying the inf-sup condition. In mixed formulations, discontinuous pressure spaces are attractive since pressure degrees of freedom can be condensed locally. In high-order isogeometric analysis, however, their Galerkin stability requires pressure-grid coarsening that increases with polynomial degree. Here, we develop a variational multiscale (VMS) stabilized mixed isogeometric formulation that retains this locality while substantially relaxing the restriction. The key observation is that VMS stabilization controls nonconstant elementwise pressure modes and is unconditionally stable with respect to its parameter, provided the elementwise constant pressure component satisfies the inf-sup condition. Consequently, for maximally continuous displacement splines, a pressure grid coarsened by a factor of two satisfies the constant-mode inf-sup criterion independently of polynomial degree. Local condensation then yields a displacement-only system, facilitating use in existing displacement solvers. The formulation is further extended to immersed isogeometric analysis with extended B-splines, pressure-cell aggregation, subdivision-based cut-cell quadrature, and weak enforcement of essential boundary conditions. Discrete inf-sup studies and convergence analyses in the Kirsch and Cook's membrane benchmarks demonstrate stability and show that the immersed treatment preserves mixed stability properties. The proposed framework therefore provides a local, high-order, and robust approach for nearly incompressible problems in mesh-conforming and immersed settings.

0.26

A Highly Efficient Depth-Averaged Material Point Method for Geophysical Mass Flows

cs.CE ·2026-10-23 ·Johann Kammholz, Yidong Zhao, Lars Blatny, Thomas Pauze, Johan Gaume
code/data similarity 0.48
Abstract

Probabilistic hazard assessment of geophysical mass flows requires large simulation ensembles and thus fast and robust numerical models. We present an open-source depth-averaged material point method formulated in global Cartesian coordinates, using Lagrangian particles to track the flow margin. A separate basal friction step based on the Coulomb, Voellmy, or $μ(I)$-rheology brings the flow to rest without artificial stopping criteria. Our model reproduces analytical solutions for a sliding block and dam-break problems and matches the deposit of a laboratory granular column collapse. A back-calculation of the 2023 Brienz/Brinzauls rockslide (Switzerland) at 1m resolution (190'000 particles) runs faster than real time on a single CPU core. Calibrated to the observed runout, the three friction laws yield very similar results, but Coulomb friction shows a slightly wider affected area than Voellmy and $μ(I)$. A probabilistic 1632-simulation ensemble at 5m resolution was computed in 76s. The model is one to two orders of magnitude faster than established depth-averaged models used in engineering practice, making catchment-style ensemble simulations feasible on a desktop computer.

0.35

A differentiable Lagrangian-coupled 3D Gaussian Splatting-SPH model for forward simulation and inverse analysis in solid mechanics

cs.CV physics.comp-ph ·2026-10-03 ·Tian Xu, Soroush Atashi, Tianju Xue
similarity 0.47
Abstract

Recent advances in generative world models have increased interest in digital models that reproduce both the appearance of real objects and their response to physical interaction. Three-dimensional reconstruction techniques, including 3D Gaussian Splatting, capture detailed surface geometry and appearance from images and videos. However, extending these representations beyond plausible animation to mechanically interpretable models for constitutive behavior, boundary conditions, and inverse parameter identification remains less explored. In this work, a differentiable Lagrangian-coupled 3DGS-smoothed particle hydrodynamics (SPH) model is proposed for forward simulation and inverse analysis of deformable solids. The observed object is first reconstructed from multi-view calibrated visual dataset as a 3DGS rendering model. An envelope-based procedure then generates an independent SPH support for the solid-mechanics model, avoiding the direct use of rendering primitives as mechanical particles. A reference-configuration Lagrangian transfer maps SPH deformation to Gaussian positions and covariances, thereby coupling the physical model and the image observation model while preserving a differentiable computational path. The SPH formulation supports linear elastic, hyperelastic, and Kelvin--Voigt viscoelastic responses, together with fixed, free, and Robin-type boundary conditions. Numerical studies validate the SPH response against finite-element results, assess accuracy and efficiency against a conventional model using Gaussian centers as surface SPH particles, and demonstrate forward simulations on beam, bridge, and liver-shaped examples. Inverse analyses further estimate constitutive and boundary parameters from rendered deformation observations, including noisy cases, demonstrating the feasibility of the proposed model for mechanics-based parameter identification from image data.

0.40

A review of weakly enforced Dirichlet boundary conditions in computational flow analysis

cs.CE math.NAphysics.flu-dyn ·2026-09-06 ·Ming-Chen Hsu, Monu Jaiswal, Yuri Bazilevs
survey similarity 0.47
Abstract

Strongly enforced Dirichlet boundary conditions require highly refined near-wall meshes to resolve steep velocity and thermal gradients. This introduces high computational costs, especially for practical flow simulations. Weakly enforced boundary conditions alleviate this burden by acting as a variationally consistent near-wall model. By allowing a controlled slip at the solid wall, weak enforcement recovers accurate flow quantities on coarse boundary-layer meshes across both incompressible and compressible regimes. Furthermore, weak boundary conditions serve as the fundamental enabling technology for immersogeometric analysis. Because the weak operator evaluates boundary integrals independently of the background mesh, high-fidelity flow analysis can be performed directly on complex geometries without fitting a mesh to the surface. This capability has facilitated direct geometry-to-analysis workflows for boundary-representation CAD models, raw point clouds, photogrammetric reconstructions, and segmented medical images. This review examines the unified mathematical development of the weak boundary condition framework from scalar advection-diffusion equations to the full Navier-Stokes equations, illustrating its versatility and robustness across incompressible and compressible flows, whether in traditional boundary-fitted, sliding-interface, or advanced immersogeometric applications.

0.46

A Query-Time Framework for Transient 2D Pore-Scale Flow Prediction and Generative Design

cs.LG ·2026-08-23 ·Yiming Wang, Jiale Zhu, Zhichen Ye, Yandong Lv, Shiqi Wang +2 more
benchmarkunusual similarity 0.47
Abstract · 34 pages, 16 figures, 4 tables

Pore-scale flow governs transport and permeability behaviour in porous media engineering applications, yet repeated lattice Boltzmann method (LBM) simulation across many geometries and design queries remains costly for repeated deployment. This study formulates transient pore-scale flow prediction as a geometry-conditioned query-time operator and introduces QSGS-Transient-7606, a benchmark of 7,606 two-dimensional porous structures each paired with 30 logarithmically sampled LBM states. The proposed continuous-time pore-scale flow surrogate model (CT-PoreFlow) integrates topology-aware geometry encoding, compressed spectral mixing, and log-time conditioning with a late-time flux-calibration objective. On unseen test geometries, CT-PoreFlow achieves a velocity relative L2 of 0.2248 and a terminal permeability error of 12.81%. Frozen morphology and computed tomography image audits confirm reasonable cross-geometry robustness without fine-tuning. The surrogate is then embedded in an inverse design workflow, screening 9,216 generative adversarial network and diffusion candidates across 18 property targets prior to LBM verification. Guided GAN sampling attains 98.11% through-connectivity and 72.28% conditional design success, exceeding diffusion-based generation. The framework unifies transient flow prediction, transport-aware screening, and LBM-verified inverse design for porous media.

0.31

CraftSPH: A composable framework for differentiable smoothed particle hydrodynamics implemented in PyTorch

cs.LG physics.flu-dynmath.NA ·2026-09-24 ·Gen Matono, Shujiro Fujioka, Mayuko Nishio
code/data similarity 0.47
Abstract · The code is publicly available at https://github.com/GenMNL/CraftSPH 43 pages, 14 figures

Smoothed particle hydrodynamics (SPH) is well suited to large-deformation fluid problems, and the growing use of automatic differentiation in engineering applications has motivated interest in differentiable SPH solvers. In this study, a composable differentiable SPH framework, CraftSPH, has been developed. In CraftSPH, major computational operations are implemented as independent modules that users can combine to construct solvers for different purposes. This design supports high-accuracy discretization and both explicit and implicit computation within a common framework, while allowing individual components to be maintained and extended. Selected numerical operations also support automatic differentiation (AD) for physical-parameter estimation and potential coupling with deep learning models. These capabilities were demonstrated through forward and inverse analyses. Forward analyses using an implicit SPH scheme with high-accuracy discretization showed good agreement with analytical and reference solutions for Poiseuille flow and a rising bubble, while capturing the key experimental trends in two- and three-dimensional dam-break problems. In inverse analyses, explicit and implicit SPH schemes were used to estimate kinematic viscosity in Taylor-Green vortex flow and Reynolds number in lid-driven cavity flow. The results also showed that the choice of operations included in the computational graph affects the computed gradients. Together, these findings demonstrate that CraftSPH enables users to assemble problem-specific solvers for forward and inverse analyses within a common framework.

0.47