CS Paper Radar

A Highly Efficient Depth-Averaged Material Point Method for Geophysical Mass Flows

Johann Kammholz, Yidong Zhao, Lars Blatny, Thomas Pauze, Johan Gaume

cs.CE ·submitted 2026-10-23 17:09 UTC · v1
code/data

Abstract

Probabilistic hazard assessment of geophysical mass flows requires large simulation ensembles and thus fast and robust numerical models. We present an open-source depth-averaged material point method formulated in global Cartesian coordinates, using Lagrangian particles to track the flow margin. A separate basal friction step based on the Coulomb, Voellmy, or $μ(I)$-rheology brings the flow to rest without artificial stopping criteria. Our model reproduces analytical solutions for a sliding block and dam-break problems and matches the deposit of a laboratory granular column collapse. A back-calculation of the 2023 Brienz/Brinzauls rockslide (Switzerland) at 1m resolution (190'000 particles) runs faster than real time on a single CPU core. Calibrated to the observed runout, the three friction laws yield very similar results, but Coulomb friction shows a slightly wider affected area than Voellmy and $μ(I)$. A probabilistic 1632-simulation ensemble at 5m resolution was computed in 76s. The model is one to two orders of magnitude faster than established depth-averaged models used in engineering practice, making catchment-style ensemble simulations feasible on a desktop computer.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Neural Networks for Depth-Averaged Avalanche Dynamics

cs.LG physics.flu-dyncond-mat.soft ·2026-09-28 ·Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.56
Abstract · 49 pages, 41 figures

Accurate prediction of avalanche motion is essential for hazard assessment in mountainous terrain. This study develops and evaluates a physics-informed neural network (PINN) framework for the Savage-Hutter model of depth-averaged granular flow, progressing from 1D analytical verification to 2D experimental validation. First, three 1D problems of increasing complexity were verified against the analytical solution: height prediction with prescribed velocity, velocity prediction with prescribed height, and coupled prediction of both fields using the conservative formulation. The decoupled tests accurately reconstructed the spatio-temporal evolution of each field when the other was prescribed. The coupled formulation learned both fields without prescribed data, achieving mean height and velocity RMSEs of 0.043 and 0.079 in non-dimensional units. A hyperparameter sensitivity study evaluated the effects of network depth, width, collocation density, learning rate, and epochs. The framework was then extended to 2D and validated against laboratory experiments of a cylindrical granular pile collapsing on an inclined plane, with TITAN2D providing numerical comparisons. Purely physics-based training converged to the trivial zero solution; augmenting the loss with 10 sparse training points from final deposit profiles produced a physics-informed, data-assisted hybrid framework. Peak flow depth, depth-averaged velocity, RMSE, and wetted-area IoU evaluated global and local agreement. Global height RMSE ranged from 2.7 to 6.7 mm across four experimental cases, while mean wetted-area IoU ranged from 69 to 81 %, demonstrating consistent performance across variations in pile mass and slope angle.

0.31

Physics-informed latent conditional flow matching for generative modeling of granular flows on inclined planes

cs.CE ·2026-11-05 ·Ziqi Han, Kuang Shi, Xuyang Li, Teng Man, Yimin Lu
similarity 0.55
Abstract

The internal kinematic and mechanical states of granular flows are difficult to observe or measure, limiting the interpretation of internal particle interactions and their role in flow evolution. In this study, we propose a physics-informed latent conditional flow matching (PI-LCFM) framework for reconstructing complete multivariable flow sequences from partial boundary observations. A variational autoencoder and temporal flow-matching model learn a reusable latent prior over velocity, granular temperature, stress, and solid volume fraction. During inference, boundary-velocity or basal-stress observations and mass- and momentum-conservation constraints guide the latent trajectory through the decoded physical fields, without retraining either model. The results demonstrate that the model accurately reconstructs full spatiotemporal fields from observations containing only 0.3\% of the complete field information, extrapolates beyond the training ranges of inclination and particle number, and recovers key trends in runout scaling, energy evolution, and stress profiles. Compared with a frame-by-frame conditional flow-matching baseline, PI-LCFM reduces the mean velocity-component root-mean-square error by 45.2\%, while observation-guided reconstruction of 500-frame sequences achieves an approximately 44-fold speedup. Physics guidance further improves conservation consistency, supporting the broader potential of this framework for inferring hidden states in particulate systems, with potential applications envisioned in geophysical hazard assessment and industrial process monitoring.

0.25

Physics-Informed Neural Networks for Depth-Averaged Granular Avalanche Dynamics on Curved Topography

cs.CE cond-mat.softcs.LGphysics.flu-dyn ·2026-09-02 ·Pujan Pranavkumar Purohit, Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.53
Abstract · 16 pages, 5 figures

Physics-informed neural networks (PINNs) provide a mesh-free framework for solving governing equations, but their application to granular avalanche dynamics over curved terrain remains largely unexplored. This study extends a depth-averaged PINN formulation based on the Savage-Hutter equations to an exponentially curved chute with spatially varying inclination and a strain-rate-dependent Mohr-Coulomb earth-pressure closure. The model is validated against measured front- and rear-edge trajectories from a laboratory granular-avalanche experiment, with selected observations withheld from training. A staged temporal curriculum proved essential for accurate prediction, reducing the held-out trajectory error by approximately two orders of magnitude compared with training over the full time domain from the outset. Sparse-data experiments further showed that observation placement was more influential than observation number within the configurations tested. Four observations bracketing the transition from acceleration to deceleration achieved nearly the same accuracy as the eight-observation reference configuration, whereas observations clustered at early or late times performed poorly. The results demonstrate the importance of both training strategy and informative data placement when applying PINNs to granular flows over curved topography.

0.36

A hierarchical graph neural network for efficient particle-resolved prediction of granular flow dynamics

cs.CE ·2026-11-12 ·Kuang Shi, Qingqi Zhao, Teng Man, Sergio Andres Galindo-Torres, Yimin Lu
benchmark similarity 0.51
Abstract · 44 pages, 10 figures

Graph neural surrogates for granular flow can resolve the motion of individual grains, but propagating information across a large amount of grains requires repeated, costly updates on the full particle graph. This study introduce a Hierarchical Coarse-Grained Graph Neural Network (HCG-GNN) that couples direct interactions between neighboring grains with information exchange on two coarser graphs of occupied spatial cells. In discrete element method (DEM) benchmarks of granular flows down incline planes, HCG-GNN captured key flow characteristics, including front propagation, lateral spreading, deposition morphology, free surface evolution, internal shear behavior, and energy conversion. Results also show that preserving grain-specific features as coarse information returned to the particle graph and integrating predicted accelerations to advance particle motion both improved multi-step accuracy. With 5 of its 7 message-passing steps performed on coarse graphs, HCG-GNN achieved accuracy comparable to a conventional particle-level GNN with a 6.47-fold training speedup and 46.2% lower GPU memory use. A model trained on up to 5000 grains predicted a 2 s release of 10000 grains in 31 s, compared with 2000 s for DEM under the benchmark conditions. This combination of speed and grain-scale resolution supports particle-resolved inverse design, with prescribed runout or discharge targets guiding the search for suitable geometries and grain dynamics revealing the basis for differences in performance.

0.39

HydroTuring: A physics probe benchmark testing mass, energy, and momentum conservation in hydrologic models

cs.AI physics.geo-phcs.LGphysics.app-ph ·2026-11-08 ·Zhi Li, Changming Li, Siavash Shams, Han Wang, Qingyi Yang +15 more
benchmark similarity 0.50
Abstract

Hydrologic models, including deep learning systems now deployed for operational flood forecasting, are evaluated primarily by how closely their simulated hydrographs match observed streamflow. However, high hydrograph skill does not guarantee physical consistency: in a synthetic calibration experiment, a conceptual model that loses 15% of its water input to an unreported sink still reaches a Nash-Sutcliffe efficiency of 0.93, and no shared benchmark tests whether models obey fundamental conservation laws. Here we introduce HydroTuring (v0.1.0), a black-box benchmark of 37 physics probes that test mass (24 probes), energy (7) and momentum (6) conservation in hydrologic models. Each probe runs a controlled experiment on forcing generated at run time from a recorded seed and applies binary pass or fail criteria validated against 18 physically exact and 59 deliberately broken reference models. Across 32 evaluated models (3 exact references, 7 AI-based models and 22 process-based models), only the 3 exact references pass every probe among the 28 models scored on 5 or more probes. Process-based and AI-based models pass similar shares of their scored probes (76% and 74%), and a pre-trained flood-forecasting LSTM fails 6 of the 11 runoff-only probes it can be scored on. Furthermore, 49% of all 1,184 model-probe pairs remain unscored because models omit the required state or flux variables, while the scored failures occur in perturbation responses and state bounds rather than long-term water-budget closure. HydroTuring provides a reproducible smoke test for model development, peer review and operational deployment under an open community protocol.

0.26

Multi-Fidelity Particle Flow Filters based on Log Homotopy

cs.CE math.NA ·2026-10-26 ·Abhinab Bhattacharjee, Andrey A. Popov, Amit N. Subrahmanya, Adrian Sandu
similarity 0.50
Abstract

This work proposes a new Multi-Fidelity Particle Flow Filter (MFPFF) based on a linear control variate framework and multilevel Monte Carlo methods. Conventional particle filters often suffer from weight collapse and particle degeneracy in high-dimensional spaces. Particle flow filters address this by smoothly transporting prior particles toward the posterior distribution, thereby avoiding the need for resampling. This work constructs multi-fidelity particle flow filters by augmenting a small number of expensive high-fidelity particles (full-order model runs) with a large number of inexpensive low-resolution particles (reduced-order surrogates constructed via intrusive Galerkin projection). These surrogates act as control variates to enhance the statistical estimate of the full-order posterior, yielding enhanced analysis accuracy at comparable computational cost. The work focuses on two particle flows based on log homotopy, the stochastic Gromov flow and deterministic Exact flow. Numerical experiments with the Korteweg-De Vries (KdV) and Quasi-Geostrophic (QG) test problems demonstrate that the proposed MFPFF achieves accuracy comparable to high-fidelity simulations while significantly reducing computational expense.

0.29

TRACE: A spatiotemporal contact memory graph network simulator for granular dynamics

cs.LG math.NAstat.ML ·2026-09-02 ·Changjian Zhou, Negin Yousefpour, Jie Qi, Junfeng Fang, Guillermo A. Narsilio +1 more
code/data similarity 0.50
Abstract

Learned graph simulators provide an efficient alternative to high-fidelity solvers for granular dynamics. However, granular motion depends strongly on inter-granular contact history, which is difficult to preserve when particle contacts form, break, and rearrange. Existing simulators mainly store temporal information in node features or node-level memory. Here we introduce TRACE, a graph-network simulator that stores interaction history directly on contact edges. Each edge maintains a persistent memory updated by attention-based message passing and a gated recurrent unit, while an edge-identity dictionary preserves this memory as the contact graph changes. A physics-structured decoder predicts inter-granular normal and tangential contact forces, enforces the Coulomb friction limit, and applies equal-and-opposite internal forces. The model is trained with single-step pretraining followed by autoregressive rollout fine-tuning. We evaluate TRACE on 2D and 3D granular column-collapse benchmarks. In both cases, TRACE produces stable, physically consistent long-horizon rollouts, closely reproducing the final deposit geometry and the kinetic energy released during collapse. Compared with graph network simulator (GNS) and node-memory graph neural simulator (NMGNS), TRACE reduces long-rollout position error by 31-62% and final-deposit error by 58-89% across the two benchmarks, while using fewer parameters and maintaining near-zero particle interpenetration. TRACE also achieves 12.2$\times$ and 8.9$\times$ speedups over the material point method (MPM) reference solver in 2D and 3D, respectively. Our code is available at https://github.com/Data-Driven-Computational-Geotechnics/TRACE.

0.58

A differentiable Lagrangian-coupled 3D Gaussian Splatting-SPH model for forward simulation and inverse analysis in solid mechanics

cs.CV physics.comp-ph ·2026-10-03 ·Tian Xu, Soroush Atashi, Tianju Xue
similarity 0.48
Abstract

Recent advances in generative world models have increased interest in digital models that reproduce both the appearance of real objects and their response to physical interaction. Three-dimensional reconstruction techniques, including 3D Gaussian Splatting, capture detailed surface geometry and appearance from images and videos. However, extending these representations beyond plausible animation to mechanically interpretable models for constitutive behavior, boundary conditions, and inverse parameter identification remains less explored. In this work, a differentiable Lagrangian-coupled 3DGS-smoothed particle hydrodynamics (SPH) model is proposed for forward simulation and inverse analysis of deformable solids. The observed object is first reconstructed from multi-view calibrated visual dataset as a 3DGS rendering model. An envelope-based procedure then generates an independent SPH support for the solid-mechanics model, avoiding the direct use of rendering primitives as mechanical particles. A reference-configuration Lagrangian transfer maps SPH deformation to Gaussian positions and covariances, thereby coupling the physical model and the image observation model while preserving a differentiable computational path. The SPH formulation supports linear elastic, hyperelastic, and Kelvin--Voigt viscoelastic responses, together with fixed, free, and Robin-type boundary conditions. Numerical studies validate the SPH response against finite-element results, assess accuracy and efficiency against a conventional model using Gaussian centers as surface SPH particles, and demonstrate forward simulations on beam, bridge, and liver-shaped examples. Inverse analyses further estimate constitutive and boundary parameters from rendered deformation observations, including noisy cases, demonstrating the feasibility of the proposed model for mechanics-based parameter identification from image data.

0.40