CS Paper Radar

Physics-Informed Neural Networks for Depth-Averaged Granular Avalanche Dynamics on Curved Topography

Pujan Pranavkumar Purohit, Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani

cs.CE cond-mat.softcs.LGphysics.flu-dyn ·submitted 2026-09-02 12:59 UTC · v1

Abstract

Physics-informed neural networks (PINNs) provide a mesh-free framework for solving governing equations, but their application to granular avalanche dynamics over curved terrain remains largely unexplored. This study extends a depth-averaged PINN formulation based on the Savage-Hutter equations to an exponentially curved chute with spatially varying inclination and a strain-rate-dependent Mohr-Coulomb earth-pressure closure. The model is validated against measured front- and rear-edge trajectories from a laboratory granular-avalanche experiment, with selected observations withheld from training. A staged temporal curriculum proved essential for accurate prediction, reducing the held-out trajectory error by approximately two orders of magnitude compared with training over the full time domain from the outset. Sparse-data experiments further showed that observation placement was more influential than observation number within the configurations tested. Four observations bracketing the transition from acceleration to deceleration achieved nearly the same accuracy as the eight-observation reference configuration, whereas observations clustered at early or late times performed poorly. The results demonstrate the importance of both training strategy and informative data placement when applying PINNs to granular flows over curved topography.

Comment
16 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Neural Networks for Depth-Averaged Avalanche Dynamics

cs.LG physics.flu-dyncond-mat.soft ·2026-09-28 ·Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.86
Abstract · 49 pages, 41 figures

Accurate prediction of avalanche motion is essential for hazard assessment in mountainous terrain. This study develops and evaluates a physics-informed neural network (PINN) framework for the Savage-Hutter model of depth-averaged granular flow, progressing from 1D analytical verification to 2D experimental validation. First, three 1D problems of increasing complexity were verified against the analytical solution: height prediction with prescribed velocity, velocity prediction with prescribed height, and coupled prediction of both fields using the conservative formulation. The decoupled tests accurately reconstructed the spatio-temporal evolution of each field when the other was prescribed. The coupled formulation learned both fields without prescribed data, achieving mean height and velocity RMSEs of 0.043 and 0.079 in non-dimensional units. A hyperparameter sensitivity study evaluated the effects of network depth, width, collocation density, learning rate, and epochs. The framework was then extended to 2D and validated against laboratory experiments of a cylindrical granular pile collapsing on an inclined plane, with TITAN2D providing numerical comparisons. Purely physics-based training converged to the trivial zero solution; augmenting the loss with 10 sparse training points from final deposit profiles produced a physics-informed, data-assisted hybrid framework. Peak flow depth, depth-averaged velocity, RMSE, and wetted-area IoU evaluated global and local agreement. Global height RMSE ranged from 2.7 to 6.7 mm across four experimental cases, while mean wetted-area IoU ranged from 69 to 81 %, demonstrating consistent performance across variations in pile mass and slope angle.

0.30

A hierarchical graph neural network for efficient particle-resolved prediction of granular flow dynamics

cs.CE ·2026-11-12 ·Kuang Shi, Qingqi Zhao, Teng Man, Sergio Andres Galindo-Torres, Yimin Lu
benchmark similarity 0.61
Abstract · 44 pages, 10 figures

Graph neural surrogates for granular flow can resolve the motion of individual grains, but propagating information across a large amount of grains requires repeated, costly updates on the full particle graph. This study introduce a Hierarchical Coarse-Grained Graph Neural Network (HCG-GNN) that couples direct interactions between neighboring grains with information exchange on two coarser graphs of occupied spatial cells. In discrete element method (DEM) benchmarks of granular flows down incline planes, HCG-GNN captured key flow characteristics, including front propagation, lateral spreading, deposition morphology, free surface evolution, internal shear behavior, and energy conversion. Results also show that preserving grain-specific features as coarse information returned to the particle graph and integrating predicted accelerations to advance particle motion both improved multi-step accuracy. With 5 of its 7 message-passing steps performed on coarse graphs, HCG-GNN achieved accuracy comparable to a conventional particle-level GNN with a 6.47-fold training speedup and 46.2% lower GPU memory use. A model trained on up to 5000 grains predicted a 2 s release of 10000 grains in 31 s, compared with 2000 s for DEM under the benchmark conditions. This combination of speed and grain-scale resolution supports particle-resolved inverse design, with prescribed runout or discharge targets guiding the search for suitable geometries and grain dynamics revealing the basis for differences in performance.

0.39

A physics-constrained emulator for time-discretised landslide runout modelling

cs.LG physics.geo-ph ·2026-11-16 ·Ye Chen, Lorenzo Nava, Maximillian Van Wyk de Vries, Fawu Wang
similarity 0.60
Abstract

Numerical simulations of landslides are commonly used to forecast impact areas. Full physics-based models provide accurate predictions, but their computational expense can preclude their use for large parameter sweeps. To achieve efficient modelling for such cases, we developed a physics-constrained neural network to emulate full landslide runout in a time-discretised manner. This emulator is trained on over 200,000 samples, each consisting of a pair of landslide thicknesses and velocities on a given DEM with a fixed time interval. To constrain the model's physical consistency, we define physics-based loss functions based on mass conservation and the system's kinetic energy loss. The model demonstrates high fidelity across the test dataset, achieving root mean square errors of approximately 0.06 m for thickness and 0.11 m/s for velocity in single-step predictions. In autoregressive rollout, these errors evolved modestly to about 0.21 m and 0.09 m/s after 110 iterations, while greatly improving computational efficiency by more than 50 times.

0.28

An Adaptive-Horizon Graph Neural Operator for coupled surrogate morphodynamic modelling

cs.LG physics.comp-ph ·2026-10-15 ·Ying Cao, Yifan Yang, Junqiang Xia, Julia C. Mullarney, Mário J. Franca
similarity 0.56
Abstract · 28 pages, 13 figures, 1 table

Morphodynamic simulations require repeated coupling between hydrodynamic solvers, sediment transport modules, and bed updating. For long duration, multi-scenario simulations on large unstructured meshes, such coupling is computationally demanding. This study proposes an Adaptive-Horizon Graph Neural Operator (AH-GNO) that formulates bed evolution as a graph operator learning problem from recent hydrodynamic and topographic states to predict future bed elevation increments. The model operates directly on the native unstructured meshes. The approach integrates area-weighted graph learning, historical state selection, and forecast horizon estimation, allowing the effective history length (K) and update interval (B) to vary with the evolving flow and bed state. Using Telemac2D/GAIA solutions as supervised numerical references, the framework is evaluated on the official Bump and Yen bend benchmarks and on a field-scale application (Waiho River, New Zealand). Results show that the AH-GNO reproduces the main patterns of bedform migration, bend-scale erosion and deposition, and localized bed adjustment. Across the three cases, the tested CPU-GPU deployment reduced post-training bed-update workflow time from 12~1204 s with GAIA to 0.08~3.34 s with AH-GNO. This improvement corresponds to deployment-specific accelerations of approximately 150~360 times relative to 4-core GAIA CPU configurations, and with 105~186 times gains for 20-core CPU configurations. These results suggest that, while retaining hydrodynamic feedback from TELEMAC-2D, a learned operator for bed updating can provide an efficient acceleration component for morphodynamic scenario analysis and rapid coupled simulation.

0.24

TRACE: A spatiotemporal contact memory graph network simulator for granular dynamics

cs.LG math.NAstat.ML ·2026-09-02 ·Changjian Zhou, Negin Yousefpour, Jie Qi, Junfeng Fang, Guillermo A. Narsilio +1 more
code/data similarity 0.55
Abstract

Learned graph simulators provide an efficient alternative to high-fidelity solvers for granular dynamics. However, granular motion depends strongly on inter-granular contact history, which is difficult to preserve when particle contacts form, break, and rearrange. Existing simulators mainly store temporal information in node features or node-level memory. Here we introduce TRACE, a graph-network simulator that stores interaction history directly on contact edges. Each edge maintains a persistent memory updated by attention-based message passing and a gated recurrent unit, while an edge-identity dictionary preserves this memory as the contact graph changes. A physics-structured decoder predicts inter-granular normal and tangential contact forces, enforces the Coulomb friction limit, and applies equal-and-opposite internal forces. The model is trained with single-step pretraining followed by autoregressive rollout fine-tuning. We evaluate TRACE on 2D and 3D granular column-collapse benchmarks. In both cases, TRACE produces stable, physically consistent long-horizon rollouts, closely reproducing the final deposit geometry and the kinetic energy released during collapse. Compared with graph network simulator (GNS) and node-memory graph neural simulator (NMGNS), TRACE reduces long-rollout position error by 31-62% and final-deposit error by 58-89% across the two benchmarks, while using fewer parameters and maintaining near-zero particle interpenetration. TRACE also achieves 12.2$\times$ and 8.9$\times$ speedups over the material point method (MPM) reference solver in 2D and 3D, respectively. Our code is available at https://github.com/Data-Driven-Computational-Geotechnics/TRACE.

0.57

Loading history and window geometry bound compact-state slip ranking during granular shear startup

cs.LG cond-mat.softcond-mat.stat-mechphysics.comp-ph ·2026-09-09 ·Ruixin Zhou, Boliang Yu
theory similarity 0.55
Abstract · 28 pages, 6 figures

Granular slip forecasting can conflate material state, loading progress, and the geometry of event-centered sampling. We separated these contributions in slowly sheared two-dimensional frictional disks using a compact neural score of stress, pressure, coordination, non-affine motion, and force-network observables. The model was developed on 36 trajectories and frozen efore testing on 18 new trajectories under two nested stress-drop definitions. Inspection of held-out results revealed post-event sampling asymmetry; recovery-aware analyses are therefore descriptive. With trajectories weighted equally, the compact score ranked near-slip windows above both prevalence and within-trajectory circular-phase controls under both definitions (representative average precision 0.310 versus prevalence 0.173; phase-null upper bound 0.257). Loading-history coordinates ranked more strongly, reaching 0.534 for causal elapsed strain. The recovery-aware rule retained 78.4\% of activity-gated events and preferentially selected longer preceding intervals; ranking by time since the previous catalogued event remained compatible with a count-conditioned geometry null. Compact observables thus contain temporally aligned slip information, but stronger loading-history baselines and window-geometry sensitivity bound that evidence. These startup data do not isolate a state-specific short-horizon precursor beyond loading history or support a renewal interpretation of elapsed-strain ranking.

0.33

A Geometry-Informed Neural Operator surrogate of LISFLOOD-FP for rapid pluvial-fluvial flood forecasting: the case of Forlì, Italy

cs.LG physics.geo-ph ·2026-11-02 ·Samuele Maria Garofalo, Fabio Limardo, Simonetta Bodojra, Mohammad Amin Nabian, Mehdi Taghizadeh
similarity 0.54
Abstract · 16 pages, 12 figures, 3 tables

Physically based two-dimensional hydraulic models are too slow for real-time inundation forecasting and large ensembles. We present a time-dependent geometry-informed neural operator (GINO) surrogate of LISFLOOD-FP for the municipality of Forlì (Italy), severely affected by the May 2023 Emilia-Romagna floods. The surrogate is designed for an operational setting in which only river stage gauges and rain gauges are available. A reproducible pipeline turns public regional observations into a physically based training set: each river inflow is driven by the first stage gauge downstream of it through a calibrated water-surface boundary condition, and rain enters as SCS-CN effective rainfall. The surrogate is an autoregressive GINO trained on 216 simulations of 24 observed events with scaled forcing. It predicts volume-conserving polygon-mean depths on an exposure-based Voronoi mesh of 659 nodes, with a 20 min step over 72 h. The surrogate is tested on 38 independent observed events that it never saw during training. On these events it reaches a critical success index (CSI) of 0.934 at 0.05m and 0.844 at 0.3 m, a depth RMSE of 0.008m and an $R^2$ of 0.984 for maximum-depth maps. On one NVIDIA A10G GPU a 72-h forecast takes 1.7 s instead of 55 s with LISFLOOD-FP, and a 50-member ensemble, computed in a single batched rollout, takes 6.2 s instead of about 46 min, which makes probabilistic flood forecasting practical. These results show that neural-operator surrogates can deliver accurate pluvial-fluvial flood forecasts driven by river stage for operational early warning.

0.22

Data-driven Prediction of Satellite-observed Avalanche Activity from Snowpack Simulations

cs.LG ·2026-09-14 ·Jakob Grahn, Filippo Maria Bianchi, Bert Kruyt, Karsten Müller
similarity 0.53
Abstract · Proceedings paper for ISSW2026. 7 pages, 4 figures

Avalanche forecasting requires knowledge of snowpack conditions and recent avalanche activity, but field observations are sparse across large mountain regions. We explore whether SNOWPACK simulations can predict avalanche activity mapped by synthetic aperture radar (SAR). We compiled five winters of Sentinel-1 avalanche detections across Norway and parts of Sweden, alongside SNOWPACK simulations forced by numerical weather predictions on a 20 x 20 km grid at different elevations and predefined slope angles. A transformer used five days of SNOWPACK outputs to predict the following day's SAR-detected Avalanche Activity Index (SAR-AAI). This index weights larger debris more heavily, spreads detections across possible occurrence dates and normalises by modelled runout area. The model was trained on four winters and evaluated on one validation winter. Regional mean predicted and reference SAR-AAI correlated at r = 0.803 after averaging over complete six-day periods. The model followed broad changes in time and space but produced smoother predictions and underestimated the strongest activity. Agreement at the 20 km cell scale was weaker (r = 0.549) after the same averaging. These results come from a single training run without evaluation on an untouched winter. Satellite observations also contain missed and false detections and uncertain timing. The results therefore do not establish operational forecast skill, but suggest that regional SNOWPACK simulations contain information about broad variations in satellite-observed avalanche activity.

0.36