CS Paper Radar

Physics-Informed Neural Networks for Depth-Averaged Avalanche Dynamics

Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani

cs.LG physics.flu-dyncond-mat.soft ·submitted 2026-09-28 11:18 UTC · v1

Abstract

Accurate prediction of avalanche motion is essential for hazard assessment in mountainous terrain. This study develops and evaluates a physics-informed neural network (PINN) framework for the Savage-Hutter model of depth-averaged granular flow, progressing from 1D analytical verification to 2D experimental validation. First, three 1D problems of increasing complexity were verified against the analytical solution: height prediction with prescribed velocity, velocity prediction with prescribed height, and coupled prediction of both fields using the conservative formulation. The decoupled tests accurately reconstructed the spatio-temporal evolution of each field when the other was prescribed. The coupled formulation learned both fields without prescribed data, achieving mean height and velocity RMSEs of 0.043 and 0.079 in non-dimensional units. A hyperparameter sensitivity study evaluated the effects of network depth, width, collocation density, learning rate, and epochs. The framework was then extended to 2D and validated against laboratory experiments of a cylindrical granular pile collapsing on an inclined plane, with TITAN2D providing numerical comparisons. Purely physics-based training converged to the trivial zero solution; augmenting the loss with 10 sparse training points from final deposit profiles produced a physics-informed, data-assisted hybrid framework. Peak flow depth, depth-averaged velocity, RMSE, and wetted-area IoU evaluated global and local agreement. Global height RMSE ranged from 2.7 to 6.7 mm across four experimental cases, while mean wetted-area IoU ranged from 69 to 81 %, demonstrating consistent performance across variations in pile mass and slope angle.

Comment
49 pages, 41 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Neural Networks for Depth-Averaged Granular Avalanche Dynamics on Curved Topography

cs.CE cond-mat.softcs.LGphysics.flu-dyn ·2026-09-02 ·Pujan Pranavkumar Purohit, Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.86
Abstract · 16 pages, 5 figures

Physics-informed neural networks (PINNs) provide a mesh-free framework for solving governing equations, but their application to granular avalanche dynamics over curved terrain remains largely unexplored. This study extends a depth-averaged PINN formulation based on the Savage-Hutter equations to an exponentially curved chute with spatially varying inclination and a strain-rate-dependent Mohr-Coulomb earth-pressure closure. The model is validated against measured front- and rear-edge trajectories from a laboratory granular-avalanche experiment, with selected observations withheld from training. A staged temporal curriculum proved essential for accurate prediction, reducing the held-out trajectory error by approximately two orders of magnitude compared with training over the full time domain from the outset. Sparse-data experiments further showed that observation placement was more influential than observation number within the configurations tested. Four observations bracketing the transition from acceleration to deceleration achieved nearly the same accuracy as the eight-observation reference configuration, whereas observations clustered at early or late times performed poorly. The results demonstrate the importance of both training strategy and informative data placement when applying PINNs to granular flows over curved topography.

0.36

A physics-constrained emulator for time-discretised landslide runout modelling

cs.LG physics.geo-ph ·2026-11-16 ·Ye Chen, Lorenzo Nava, Maximillian Van Wyk de Vries, Fawu Wang
similarity 0.63
Abstract

Numerical simulations of landslides are commonly used to forecast impact areas. Full physics-based models provide accurate predictions, but their computational expense can preclude their use for large parameter sweeps. To achieve efficient modelling for such cases, we developed a physics-constrained neural network to emulate full landslide runout in a time-discretised manner. This emulator is trained on over 200,000 samples, each consisting of a pair of landslide thicknesses and velocities on a given DEM with a fixed time interval. To constrain the model's physical consistency, we define physics-based loss functions based on mass conservation and the system's kinetic energy loss. The model demonstrates high fidelity across the test dataset, achieving root mean square errors of approximately 0.06 m for thickness and 0.11 m/s for velocity in single-step predictions. In autoregressive rollout, these errors evolved modestly to about 0.21 m and 0.09 m/s after 110 iterations, while greatly improving computational efficiency by more than 50 times.

0.28

A hierarchical graph neural network for efficient particle-resolved prediction of granular flow dynamics

cs.CE ·2026-11-12 ·Kuang Shi, Qingqi Zhao, Teng Man, Sergio Andres Galindo-Torres, Yimin Lu
benchmark similarity 0.63
Abstract · 44 pages, 10 figures

Graph neural surrogates for granular flow can resolve the motion of individual grains, but propagating information across a large amount of grains requires repeated, costly updates on the full particle graph. This study introduce a Hierarchical Coarse-Grained Graph Neural Network (HCG-GNN) that couples direct interactions between neighboring grains with information exchange on two coarser graphs of occupied spatial cells. In discrete element method (DEM) benchmarks of granular flows down incline planes, HCG-GNN captured key flow characteristics, including front propagation, lateral spreading, deposition morphology, free surface evolution, internal shear behavior, and energy conversion. Results also show that preserving grain-specific features as coarse information returned to the particle graph and integrating predicted accelerations to advance particle motion both improved multi-step accuracy. With 5 of its 7 message-passing steps performed on coarse graphs, HCG-GNN achieved accuracy comparable to a conventional particle-level GNN with a 6.47-fold training speedup and 46.2% lower GPU memory use. A model trained on up to 5000 grains predicted a 2 s release of 10000 grains in 31 s, compared with 2000 s for DEM under the benchmark conditions. This combination of speed and grain-scale resolution supports particle-resolved inverse design, with prescribed runout or discharge targets guiding the search for suitable geometries and grain dynamics revealing the basis for differences in performance.

0.39

An Adaptive-Horizon Graph Neural Operator for coupled surrogate morphodynamic modelling

cs.LG physics.comp-ph ·2026-10-15 ·Ying Cao, Yifan Yang, Junqiang Xia, Julia C. Mullarney, Mário J. Franca
similarity 0.58
Abstract · 28 pages, 13 figures, 1 table

Morphodynamic simulations require repeated coupling between hydrodynamic solvers, sediment transport modules, and bed updating. For long duration, multi-scenario simulations on large unstructured meshes, such coupling is computationally demanding. This study proposes an Adaptive-Horizon Graph Neural Operator (AH-GNO) that formulates bed evolution as a graph operator learning problem from recent hydrodynamic and topographic states to predict future bed elevation increments. The model operates directly on the native unstructured meshes. The approach integrates area-weighted graph learning, historical state selection, and forecast horizon estimation, allowing the effective history length (K) and update interval (B) to vary with the evolving flow and bed state. Using Telemac2D/GAIA solutions as supervised numerical references, the framework is evaluated on the official Bump and Yen bend benchmarks and on a field-scale application (Waiho River, New Zealand). Results show that the AH-GNO reproduces the main patterns of bedform migration, bend-scale erosion and deposition, and localized bed adjustment. Across the three cases, the tested CPU-GPU deployment reduced post-training bed-update workflow time from 12~1204 s with GAIA to 0.08~3.34 s with AH-GNO. This improvement corresponds to deployment-specific accelerations of approximately 150~360 times relative to 4-core GAIA CPU configurations, and with 105~186 times gains for 20-core CPU configurations. These results suggest that, while retaining hydrodynamic feedback from TELEMAC-2D, a learned operator for bed updating can provide an efficient acceleration component for morphodynamic scenario analysis and rapid coupled simulation.

0.24

NeSAM: Neuro-Symbolic Kinodynamics with Soil Adaptation for Off-Road Mobility

cs.RO ·2026-08-21 ·Chenhui Pan, Tong Xu, Francesco Cancelliere, Xuesu Xiao
similarity 0.57
Abstract

Accurate prediction of off-road vehicle motion over deformable terrain remains challenging because sinkage, slip, and traction vary with local soil conditions. Existing learning-based kinodynamic models directly approximate vehicle-terrain interactions from data but do not explicitly represent soil mechanics and offer limited physical interpretability. To address these limitations, we present NeSAM, a neuro-symbolic framework that combines differentiable Bekker-Wong terramechanics with learned terrain representations and a Transformer-based residual dynamics model for long-horizon, six degree-of-freedom kinodynamic prediction. The terramechanics component models soil-dependent interaction forces, while the residual model corrects discrepancies between the analytical prediction and the observed vehicle dynamics. NeSAM further estimates physically meaningful soil parameters from terrain observations and updates them online using an extended Kalman filter. We evaluate NeSAM in Verti-Bench, a simulator built on the Chrono multiphysics engine, and validate its performance on a physical Verti-4-Wheeler platform. NeSAM improves prediction accuracy by up to 30% in simulation and 29% on real-world data relative to the strongest compared baselines. When integrated with a close-loop navigation controller, NeSAM further improves traversal success rate through online soil adaptation while reduces Hausdorff distance to the reference trajectory by 69.4%, indicating improved trajectory tracking accuracy.

0.47

A Highly Efficient Depth-Averaged Material Point Method for Geophysical Mass Flows

cs.CE ·2026-10-23 ·Johann Kammholz, Yidong Zhao, Lars Blatny, Thomas Pauze, Johan Gaume
code/data similarity 0.56
Abstract

Probabilistic hazard assessment of geophysical mass flows requires large simulation ensembles and thus fast and robust numerical models. We present an open-source depth-averaged material point method formulated in global Cartesian coordinates, using Lagrangian particles to track the flow margin. A separate basal friction step based on the Coulomb, Voellmy, or $μ(I)$-rheology brings the flow to rest without artificial stopping criteria. Our model reproduces analytical solutions for a sliding block and dam-break problems and matches the deposit of a laboratory granular column collapse. A back-calculation of the 2023 Brienz/Brinzauls rockslide (Switzerland) at 1m resolution (190'000 particles) runs faster than real time on a single CPU core. Calibrated to the observed runout, the three friction laws yield very similar results, but Coulomb friction shows a slightly wider affected area than Voellmy and $μ(I)$. A probabilistic 1632-simulation ensemble at 5m resolution was computed in 76s. The model is one to two orders of magnitude faster than established depth-averaged models used in engineering practice, making catchment-style ensemble simulations feasible on a desktop computer.

0.35

Deep Learning for Satellite-Based Mountain Hazard Screening: A Retrospective Failure Analysis on the 2021 Chamoli Rock-Ice Avalanche

cs.CV ·2026-11-16 ·Snigdhajyoti Rakshit
similarity 0.56
Abstract · 27 pages, 10 figures, 8 tables

The approach utilizes 10 bands from Sentinel-2 imagery, along with terrain information, in a deep learning pipeline to classify potential hazard sources in any given mountainous region. The performance of our model has been evaluated against the data collected during the rock-ice avalanche event in the Chamoli region in the Indian Himalayas on 7th February 2021. U-Net performs segmentation of the detected land surface in the satellite image, detects changes in the identify candidate hazard zones, and then the following steps are performed to calculate the potential energy using the Monte Carlo sampling for steepest descent (D8) flow paths, finding the exposed structures in the downstream locations, and ranking the zones depending on the risk score. In comparison to the simple spectral rule, our approach achieved the higher macro F1 score of 0.648 (as compared to 0.519). But the F1 score in case of rock and soil was low, being in the range of 0.3s. In case of optical change detection in winter, it's only that northeast-facing slope which couldn't be detected, as it was under 73% of shade prior to the incident. The parameters have been set for this particular scene alone and not independently; hence, this is a retrospective test, and this test locates a failure which has occurred earlier. The primary contribution of this paper is locating the pipeline leak.

0.24

An AI-assisted conditioning and geological interpretation workflow for usage in implicit geological modeling

cs.AI physics.geo-phcs.LG ·2026-10-07 ·Stefan Carpentier, Jan Diederik van Wees, Eva de Boever, Jan Niederau, Camille Chapeland +3 more
similarity 0.55
Abstract · 17 page, 19 figures

Implicit modeling and Relative Geologic Time are geological modeling techniques that enable more efficient, faster, less biased and more reproducible modeling results. For optimal operation, these techniques require many well-constrained input data. In the framework of the Horizon Europe GO-Forward and MOOI WarmingUP GOO projects and to accelerate Implicit modeling, Machine Learning (ML) methods have been tested and implemented in a toolkit for the interpretation of (onshore) seismic data from the shallow to deep range (+- 300 - 3500 m). The goal is to rapidly characterise this depth domain by efficient interpretation of horizons and faults in seismic data. The first step is to improve the signal by applying AI techniques like self-supervised and semi-supervised contrastive learning CNN's for noise reduction and interpolation. Next, horizons and faults are interpreted with minimal use of human-generated training data by using (semi-) self-supervised methods. The resulting developed toolkit supports the application of the implemented algorithms in an efficient workflow. As a first demonstration, the top of the Dutch Maassluis Formation has been interpreted in the Leeuwarden and Waalwijk 3D seismic cubes. Overall, this study demonstrates that AI-assisted interpretation workflows have reached a level of maturity that allows their integration into applied geological modeling and decision-making.

0.22