CS Paper Radar

Loading history and window geometry bound compact-state slip ranking during granular shear startup

Ruixin Zhou, Boliang Yu

cs.LG cond-mat.softcond-mat.stat-mechphysics.comp-ph ·submitted 2026-09-09 16:57 UTC · v1
theory

Abstract

Granular slip forecasting can conflate material state, loading progress, and the geometry of event-centered sampling. We separated these contributions in slowly sheared two-dimensional frictional disks using a compact neural score of stress, pressure, coordination, non-affine motion, and force-network observables. The model was developed on 36 trajectories and frozen efore testing on 18 new trajectories under two nested stress-drop definitions. Inspection of held-out results revealed post-event sampling asymmetry; recovery-aware analyses are therefore descriptive. With trajectories weighted equally, the compact score ranked near-slip windows above both prevalence and within-trajectory circular-phase controls under both definitions (representative average precision 0.310 versus prevalence 0.173; phase-null upper bound 0.257). Loading-history coordinates ranked more strongly, reaching 0.534 for causal elapsed strain. The recovery-aware rule retained 78.4\% of activity-gated events and preferentially selected longer preceding intervals; ranking by time since the previous catalogued event remained compatible with a count-conditioned geometry null. Compact observables thus contain temporally aligned slip information, but stronger loading-history baselines and window-geometry sensitivity bound that evidence. These startup data do not isolate a state-specific short-horizon precursor beyond loading history or support a renewal interpretation of elapsed-strain ranking.

Comment
28 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Neural Networks for Depth-Averaged Granular Avalanche Dynamics on Curved Topography

cs.CE cond-mat.softcs.LGphysics.flu-dyn ·2026-09-02 ·Pujan Pranavkumar Purohit, Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.55
Abstract · 16 pages, 5 figures

Physics-informed neural networks (PINNs) provide a mesh-free framework for solving governing equations, but their application to granular avalanche dynamics over curved terrain remains largely unexplored. This study extends a depth-averaged PINN formulation based on the Savage-Hutter equations to an exponentially curved chute with spatially varying inclination and a strain-rate-dependent Mohr-Coulomb earth-pressure closure. The model is validated against measured front- and rear-edge trajectories from a laboratory granular-avalanche experiment, with selected observations withheld from training. A staged temporal curriculum proved essential for accurate prediction, reducing the held-out trajectory error by approximately two orders of magnitude compared with training over the full time domain from the outset. Sparse-data experiments further showed that observation placement was more influential than observation number within the configurations tested. Four observations bracketing the transition from acceleration to deceleration achieved nearly the same accuracy as the eight-observation reference configuration, whereas observations clustered at early or late times performed poorly. The results demonstrate the importance of both training strategy and informative data placement when applying PINNs to granular flows over curved topography.

0.36

History-Conditioned Flow Matching for Probabilistic Dynamics of Tendon-Driven Continuum Robots

cs.RO ·2026-09-22 ·Hang Yang, Tingcong Liu, Junjie Xiong, Fangju Yang, Ke Wu
similarity 0.53
Abstract

Deterministic dynamics modeling of tendon-driven continuum robots remains challenging owing to uncertainties in material behavior, tendon transmission, friction, and contact. Measured joint configurations and nominal tendon commands do not fully characterize these internal mechanical factors, leaving uncertainty in the subsequent motion. We therefore develop a history-conditioned, physics-informed flow-matching framework for probabilistic dynamics prediction, using motion and actuation histories to predict the distribution of the next complete joint configuration. By recursively sampling next-step configurations under prescribed commands, the model predicts distributions of future whole-body motions. In simulation, scenario-specific models achieve five-second trajectory Energy Scores (lower is better) of 12.05 mm under internal friction variation and 9.29 mm under unobserved actuation disturbances. Relative to the conditional variational autoencoder and diffusion baselines, Flow attains lower Energy Scores and coverage closer to the nominal level in both scenarios. Ablations support history and structural conditioning in both scenarios. On the physical robot, predictions under two tendon-command profiles excluded from training capture the principal motion sequences, with five-second Energy Scores of 11.91 and 11.42 mm, lower than the compared baselines. The predicted-to-measured spread ratios are 1.65 and 1.22 (closer to 1 is better). These results support history-conditioned probabilistic dynamics prediction under incomplete mechanical observations.

0.23

Physics-Informed Neural Networks for Depth-Averaged Avalanche Dynamics

cs.LG physics.flu-dyncond-mat.soft ·2026-09-28 ·Pradyumn Singh Sikarwar, Vishal Sharma, Gaurav Bhutani
similarity 0.51
Abstract · 49 pages, 41 figures

Accurate prediction of avalanche motion is essential for hazard assessment in mountainous terrain. This study develops and evaluates a physics-informed neural network (PINN) framework for the Savage-Hutter model of depth-averaged granular flow, progressing from 1D analytical verification to 2D experimental validation. First, three 1D problems of increasing complexity were verified against the analytical solution: height prediction with prescribed velocity, velocity prediction with prescribed height, and coupled prediction of both fields using the conservative formulation. The decoupled tests accurately reconstructed the spatio-temporal evolution of each field when the other was prescribed. The coupled formulation learned both fields without prescribed data, achieving mean height and velocity RMSEs of 0.043 and 0.079 in non-dimensional units. A hyperparameter sensitivity study evaluated the effects of network depth, width, collocation density, learning rate, and epochs. The framework was then extended to 2D and validated against laboratory experiments of a cylindrical granular pile collapsing on an inclined plane, with TITAN2D providing numerical comparisons. Purely physics-based training converged to the trivial zero solution; augmenting the loss with 10 sparse training points from final deposit profiles produced a physics-informed, data-assisted hybrid framework. Peak flow depth, depth-averaged velocity, RMSE, and wetted-area IoU evaluated global and local agreement. Global height RMSE ranged from 2.7 to 6.7 mm across four experimental cases, while mean wetted-area IoU ranged from 69 to 81 %, demonstrating consistent performance across variations in pile mass and slope angle.

0.30

Terrain-Dependent Intra-Cycle Leg Timing for Effective Locomotion on Granular Slopes

cs.RO ·2026-10-02 ·Long Zhao, Xingjue Liao, Feifei Qian
similarity 0.51
Abstract

Locomotion on granular slopes such as sand dunes remains a fundamental challenge for legged robots due to reduced shear strength and gravity-induced anisotropic yielding of granular media. Using a hexapedal robot on a tiltable granular bed, we systematically measure locomotion speed together with slope-dependent normal and shear granular resistive forces. While normal penetration resistance remains nearly unchanged with inclination, shear resistance decreases substantially as slope angle increases. Guided by these measurements, we develop a simple robot-terrain interaction model that predicts anchoring timing, step length, and resulting robot speed, as functions of terrain strength and slope angle. The model reveals that slope-induced performance loss is primarily governed by delayed anchoring and increased backward slip rather than excessive sinkage. By extending the model to generalized terrain conditions, we construct failure phase diagrams that identify sinkage- and slippage-induced failure regimes, enabling quantitative risk estimation for locomotion on granular slopes. This physics-informed framework provides predictive insight into terrain-dependent failure mechanisms and offers guidance for safer and more robust robot operation on deformable inclines.

0.25

Compact Visuotactile World Models for Lifting: Prediction, Reward Alignment, and Force Constraints

cs.RO cs.AI ·2026-09-09 ·Qinzhen Ma
similarity 0.48
Abstract · 8 pages, 2 figures. Code and tabulated results included as ancillary material

Accurate tactile forecasts need not improve force-constrained control. We study a 652,157-parameter action-conditioned visuotactile world model with matched behavior cloning, policy learning in imagination, independent reactive implicit Q-learning, and model-assisted force feedback. A fixed protocol executes 34 policies on 120 fresh MuJoCo environments spanning geometry and physical-parameter shifts, plus 324 independently replayed action branches on 12 additional ID environments. Visuotactile dynamics reduce force action-effect MAE from 0.413 N for persistence to 0.338 N. Model-assisted feedback raises ID force-budgeted success from 73.3% to 93.3%, with paired difference +20.0 [+6.7,+33.4] percentage points (95% CI), with the difference occurring during scripted lowering. Its pooled difference is +3.9 [-4.5,+11.7] points. Imagined RL achieves 11.9% pooled joint success versus 25.0% for reactive IQL. An empirical tactile-residual stress test adds 330 executions. The evidence concerns rigid-box lifting after a common approach, without physical-robot transfer or a closed-loop safety guarantee.

0.29

DynLimit: A Simulation Benchmark for Dynamics-Critical Planning and Control

cs.RO ·2026-11-15 ·Yang Xiao, Yongzhi Liu, Sunan Zhang, Kang Wang, Guodong Yin +1 more
benchmarkcode/data similarity 0.48
Abstract · 8 pages

Experiments near vehicle handling limits must keep three questions apart: what a maneuver requests, what the closed-loop system executes, and whether the task is completed. We present DynLimit, a simulation platform that organizes this process end to end. Scenarios are composed from road, friction, obstacle, and reference objects; planners and controllers attach through a shared observation and control interface; a vehicle adapter runs either a license-free four-wheel model or an external dynamics solver; and synchronized records feed task evaluation, replay, and response inspection. The platform carries a task-oriented evaluation method that pairs a prescribed reference demand with a sampled passing set and event-aligned diagnosis. Across eight task families, three friction environments, and three reference-assisted baseline chains we executed 450 runs: 360 nominal, 18 locally refined, and 72 with prescribed initial offsets. Method differences depend on the task family, equal aggregate pass counts arise from different passing cells, and local refinement narrows two sampled transitions without locating a continuous boundary. Two case comparisons show why sideslip or tire-utilization peaks cannot replace task constraints. The three views therefore stay distinct in every reported run: an outcome can be traced from the prescribed demand, through the executed response, to the task rule that decided it. Code is available at https://github.com/Yang2581/dynlimit

0.28

STRIDE: State-Transition Representation via Increment Dynamics and Evolution

cs.LG ·2026-09-26 ·Yuchen Xiong, Siming Huang, Jianfeng Sun
benchmark similarity 0.47
Abstract

We introduce STRIDE (State-Transition Representation via Increment Dynamics and Evolution), which defines states through derivative fingerprints and learns local functions for state transitions (qpairs), recasting continuous forecasting as transition prediction. Trailing convolution windows estimate local joint-transition frequencies, whose lagged differences form a high-dimensional increment trajectory. Proper orthogonal decomposition (POD) gives coordinate paths, jointly forecast by sparse dynamics with memory. Recombining their forecasts and applying history-anchored inversion recovers future transition distributions; sampled state paths select local functions to generate continuous forecasts. Three-seed experiments compare STRIDE against fourteen baselines across nine benchmark families. Five independent Markov and hidden-state baselines cover all 230 evaluated tasks, with 220 complete whole-horizon pairs. Against these comparators, system-weighted late-Energy win fractions range from 73.6% to 78.5% on 190 multi-step pairs; against DLinear, the fraction is 77.3% on 72 paired multi-step tasks. Matched controls examine the intermediate representation. On 64 independently initialized Aizawa trajectories, late-Energy reductions against four matched controls range from approximately 24% to 56%, with all four prespecified contrasts passing Holm correction. These results connect transition-statistic prediction to continuous probabilistic forecasting, with substantial long-horizon gains in the matched Aizawa study.

0.30

Physics-informed latent conditional flow matching for generative modeling of granular flows on inclined planes

cs.CE ·2026-11-05 ·Ziqi Han, Kuang Shi, Xuyang Li, Teng Man, Yimin Lu
similarity 0.47
Abstract

The internal kinematic and mechanical states of granular flows are difficult to observe or measure, limiting the interpretation of internal particle interactions and their role in flow evolution. In this study, we propose a physics-informed latent conditional flow matching (PI-LCFM) framework for reconstructing complete multivariable flow sequences from partial boundary observations. A variational autoencoder and temporal flow-matching model learn a reusable latent prior over velocity, granular temperature, stress, and solid volume fraction. During inference, boundary-velocity or basal-stress observations and mass- and momentum-conservation constraints guide the latent trajectory through the decoded physical fields, without retraining either model. The results demonstrate that the model accurately reconstructs full spatiotemporal fields from observations containing only 0.3\% of the complete field information, extrapolates beyond the training ranges of inclination and particle number, and recovers key trends in runout scaling, energy evolution, and stress profiles. Compared with a frame-by-frame conditional flow-matching baseline, PI-LCFM reduces the mean velocity-component root-mean-square error by 45.2\%, while observation-guided reconstruction of 500-frame sequences achieves an approximately 44-fold speedup. Physics guidance further improves conservation consistency, supporting the broader potential of this framework for inferring hidden states in particulate systems, with potential applications envisioned in geophysical hazard assessment and industrial process monitoring.

0.25