CS Paper Radar

Terrain-Dependent Intra-Cycle Leg Timing for Effective Locomotion on Granular Slopes

Long Zhao, Xingjue Liao, Feifei Qian

cs.RO ·submitted 2026-10-02 23:32 UTC · v1

Abstract

Locomotion on granular slopes such as sand dunes remains a fundamental challenge for legged robots due to reduced shear strength and gravity-induced anisotropic yielding of granular media. Using a hexapedal robot on a tiltable granular bed, we systematically measure locomotion speed together with slope-dependent normal and shear granular resistive forces. While normal penetration resistance remains nearly unchanged with inclination, shear resistance decreases substantially as slope angle increases. Guided by these measurements, we develop a simple robot-terrain interaction model that predicts anchoring timing, step length, and resulting robot speed, as functions of terrain strength and slope angle. The model reveals that slope-induced performance loss is primarily governed by delayed anchoring and increased backward slip rather than excessive sinkage. By extending the model to generalized terrain conditions, we construct failure phase diagrams that identify sinkage- and slippage-induced failure regimes, enabling quantitative risk estimation for locomotion on granular slopes. This physics-informed framework provides predictive insight into terrain-dependent failure mechanisms and offers guidance for safer and more robust robot operation on deformable inclines.

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

cs.RO ·2026-09-27 ·Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava
similarity 0.65
Abstract

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller capable of handling multiple terrains is ideal, eliminating the need for multiple specialized controllers. We propose a multi-terrain controller to enhance the versatility and robustness of bipedal locomotion. Building on previous work with a stance ankle motor for stability on inclined and rough surfaces, this paper extends capabilities to steep wet uneven grassy slopes, and compliant terrains such as sand, gravel, rocks, and constrained terrains like staircases. To address the unique demands of these terrains, we introduce a new impact map that is essential for maintaining performance and robustness against unseen terrains. We also discuss in detail the control structure for real-time deployment on the robot. We validate our controller on the 20 degree-of-freedom Cassie bipedal robot.

0.23

Importance and methods to control, vary, and characterize mud strength for studying locomotion

cs.RO physics.bio-phcond-mat.softeess.SY+1 ·2026-09-01 ·Divya Ramesh, Gargi Sadalgekar, Qiyuan Fu, Zachary Souders, Jack Rao +1 more
publishedunusual similarity 0.63
Abstract · Journal of Experimental Biology, in review

Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.

0.46

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.63
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

Inferring Soil Friction Angle from Robot Foot-Ground Force Histories: A Bayesian Inverse Approach to Proprioceptive Soil Sensing

cs.RO ·2026-09-29 ·Dawei Xu, Zhijie Wang
similarity 0.58
Abstract · 14 pages, 12 figures

Foot-ground interaction signals recorded by quadruped robots may enable spatially distributed, in situ characterization of soil strength. As a first step, we test whether the internal friction angle $φ$ of cohesionless soil can be identified from the force history of a simplified rotating leg. A two-dimensional continuum model implemented with the material point method, benchmarked against measured rotating-leg force histories, generates the training data, and two Gaussian-process surrogates support Bayesian inversion of the full histories. In matched-model experiments, the framework recovers 14 off-grid friction angles with a median absolute error of approximately $0.1^\circ$ (maximum $\sim 0.7^\circ$); the reported credible intervals contain the true value in every case. These results establish that $φ$ is identifiable when the forward model is correctly specified, and support further development of proprioceptive soil sensing for spatially variable terrain, with applications from physics-grounded world models for robot training to post-wildfire slope assessment.

0.40

Predictive Safety Curricula for Robust Legged Locomotion

cs.RO cs.AIcs.LG ·2026-09-29 ·Ivan Ovinnikov, Pascal Sutter, Christian Gehring, Jordis Herrmann
similarity 0.57
Abstract

Rare but consequential failures can persist in learned locomotion policies for legged robots even when average task performance is high, in part because standard curricula primarily adapt task difficulty rather than the distribution of safety-critical experience. We introduce Predictive Safety Curricula (PSC), a framework for allocating locomotion training experience using learned predictions of future safety cost. PSC trains a distributional safety critic from policy rollouts and uses its predictions to prioritize both terrain contexts and previously encountered randomized events. The resulting curriculum modifies the training distribution while leaving the task reward and policy-optimization loss unchanged. We evaluate PSC in controlled rough-terrain locomotion and in production locomotion systems. PSC improves reliability relative to standard terrain progression, advantage-based replay, and learning-progress curricula, with the largest gains on difficult terrain and under degraded observations. The same allocation principle transfers to two production locomotion stacks. On ANYmal-D hardware, PSC reduces shank-collision incidence by $63\%$ relative to the learning-progress curriculum across three matched training seeds, with a reduction in every seed. On a production stair-climbing platform, PSC eliminates observed shank collisions in the evaluated hardware trials. These results show that learned predictions of future safety cost can provide an effective signal for allocating training experience toward rare failure modes and improving locomotion reliability.

0.43

RAIWAY: A Large-Wheeled Bipedal Robot with Contact-Informed Blind Locomotion

cs.RO ·2026-10-23 ·Kyungmin Nam, Jiseong Lee, Donghyuk Choi, Jeongsoo Park, Woojin Kim +1 more
top venue similarity 0.56
Abstract · 8 pages, 7 figures. Accepted to IEEE Robotics and Automation Letters (RA-L)

We present RAIWAY, an in-house wheeled bipedal robot with 20-inch wheels, together with a contact-informed control approach for rolling locomotion across irregular and discontinuous terrain. Such locomotion is fundamentally contact-dominated, governed by local wheel--terrain interaction that is impractical to instrument directly and depends on more than terrain geometry alone. The proposed framework exploits the contact information available in simulation, distilling multi-contact events into a latent representation. At deployment, the controller infers this representation online from proprioception, requiring no contact sensing. In real-world experiments, the proposed system traverses diverse environments including steep slopes, gravel beds, studded surfaces, and rocky terrain, and demonstrates continuous ascent on the tested outdoor staircases with riser heights up to 15~cm. On our platform, the proposed controller further outperforms baselines without the contact-informed mechanism across challenging indoor and outdoor settings. The video can be found at https://youtu.be/Ch0divLg64w.

0.38

Anticipatory Gait Switching for Quadrupeds via Look-Ahead MDP Planning

cs.RO ·2026-10-17 ·Kelvin Aladum, Justin Peel, Nisar Ahmed
similarity 0.55
Abstract

Quadruped robots often switch gaits to traverse mixed terrain safely. Many practical supervisors enforce hardware constraints (e.g., dwell or guard intervals) using a transition handler. However, the switch decision itself is often driven by near-field thresholds, which can delay commitment when rough terrain is only detected shortly before contact in the local height map. We propose a lightweight height-map-only gait supervisor that unifies look-ahead and locomotion constraints in a single decision policy. A robot-centered height map is partitioned into near-, mid-, and far-field bands, each discretized into a terrain class, and band evolution is modeled as a Markov process. Gait selection is cast as a look-ahead Markov Decision Process whose transition model and cost explicitly encode platform-specific switching constraints. Indoor and outdoor experiments on a Unitree Go2 platform show reduced late switching, lower time spent using ineffective gaits on rough terrain, and improved roll stability compared to tuned reactive baselines. Overall, the MDP formulation yields anticipative constraint-aware gait switching that improves robustness without course-specific retuning.

0.12

Stability Principle Inherent in Wheel Gait of Planar X-shaped Walker Generated Using Constant Torque Drive and Mechanical Stoppers

cs.RO ·2026-11-16 ·Fumihiko Asano, Cong Yan
top venue similarity 0.55
Abstract · 8 pages, 6 figures. Published in the Proceedings of IEEE ICRA 2026. This author version corrects the author names in one reference; the scie…

Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximate analytical solutions for the state error transition function matrix in each phase using a linearized model, and analyze the increase or decrease in the state error norm using metrics such as its maximum singular value. Numerical simulations demonstrate that while two phases are unstable in terms of the increase in the state error norm, the remaining two phases are stable, resulting in overall asymptotic stability.

0.61