CS Paper Radar

Importance and methods to control, vary, and characterize mud strength for studying locomotion

Divya Ramesh, Gargi Sadalgekar, Qiyuan Fu, Zachary Souders, Jack Rao, Chen Li

cs.RO physics.bio-phcond-mat.softeess.SYq-bio.OT ·submitted 2026-09-01 01:56 UTC · v1
publishedunusual

Abstract

Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.

Comment
Journal of Experimental Biology, in review

Closest papers

Nearest neighbours by meaning across the whole index.

Mudskippers use tail thrusting to help crutching to move on mud of various wetness

cs.RO physics.bio-phcond-mat.softeess.SY+1 ·2026-09-01 ·Divya Ramesh, Gargi Sadalgekar, Jiangqi Tan, Chen Li
similarity 0.79
Abstract · Journal of Experimental Biology, in review

At the water-land interface, amphibious fishes encounter wet flowable substrates made of granular solid-water mixtures, which can stay solid or flow like a fluid. As these substrates become wetter or drier, their yield strength (at which solid-fluid transition occurs) and cohesion (how sticky they are) both change, challenging locomotion. Despite substantial understanding of tetrapod locomotion on flowable substrates (mostly dry sand), we know little about how amphibious fishes cope with wet flowable substrates of various wetness. Here, we studied mudskippers on clay mud of controlled, variable wetness over the range where solid-fluid transition occurs. As mud became wetter, its strength decreased by 100-fold, leading the animal to sink deeper, with larger areas of body and fins contacting mud. By contrast, mud stuck most easily at intermediate wetness. The increased sinkage and contact and stickiness change caused more mud to stick to and pull against the animal on wetter mud. We also tested dry mud, which stuck to animal fins as its mucus dried. Despite these challenges, the mudskipper predominately used a conserved crutching gait on all except the wettest mud tested, with a modest performance reduction. When normal crutching became less effective, the animal assisted it with tail thrusting, by bending and straightening it to push downward and backward to generate additional thrust and lift, or even thrusting the tail to jump. These observations suggest that mudskipper's crutching motor program is well adapted to its native muddy substrates but inflexible, with most novelty in tail use.

0.35

Terrain-Dependent Intra-Cycle Leg Timing for Effective Locomotion on Granular Slopes

cs.RO ·2026-10-02 ·Long Zhao, Xingjue Liao, Feifei Qian
similarity 0.63
Abstract

Locomotion on granular slopes such as sand dunes remains a fundamental challenge for legged robots due to reduced shear strength and gravity-induced anisotropic yielding of granular media. Using a hexapedal robot on a tiltable granular bed, we systematically measure locomotion speed together with slope-dependent normal and shear granular resistive forces. While normal penetration resistance remains nearly unchanged with inclination, shear resistance decreases substantially as slope angle increases. Guided by these measurements, we develop a simple robot-terrain interaction model that predicts anchoring timing, step length, and resulting robot speed, as functions of terrain strength and slope angle. The model reveals that slope-induced performance loss is primarily governed by delayed anchoring and increased backward slip rather than excessive sinkage. By extending the model to generalized terrain conditions, we construct failure phase diagrams that identify sinkage- and slippage-induced failure regimes, enabling quantitative risk estimation for locomotion on granular slopes. This physics-informed framework provides predictive insight into terrain-dependent failure mechanisms and offers guidance for safer and more robust robot operation on deformable inclines.

0.25

MOSS: Multimodal Origami Swamp Robot System

cs.RO ·2026-10-16 ·Tian Lan, Atar Babgei, Luca Romanello, Mirko Kovac, Sophie F. Armanini
similarity 0.55
Abstract · 8 pages, 8 figures, submitted to ICRA 2027

Robotic systems for environmental monitoring and ecological surveying in wetlands and swamps must operate across diverse terrestrial and aquatic conditions. Conventional fixed-geometry wheels cannot adapt their contact geometry to these varying conditions. This work presents MOSS (Multimodal Origami Swamp Robot System), a compact amphibious robotic platform with 3D-printed origami wheels. The compact crank mechanism switches the wheel between contracted and expanded configurations, changing its width, body diameter, and fin orientation simultaneously. The contracted configuration is better suited to efficient rolling on firmer ground, whereas the expanded configuration provides greater contact and terrain engagement on softer surfaces. MOSS was evaluated on soil, sand, mud with varying water content, and water, in addition to in-motion morphing and terrestrial-aquatic transition tests. The more energy-efficient wheel configuration depended on terrain. The contracted configuration achieved a lower cost of transport on firmer soil and mud, whereas the expanded configuration performed better on wetter mud, sand, and water, reducing the cost of transport by up to 29%. Expanded wheels also reduced slip in wet mud and reduced both slip and hub sinkage in sand. MOSS successfully completed configuration changes in $1.95 \pm 0.11$ s and demonstrated continuous locomotion across soil-mud-water transitions. Outdoor trials further demonstrated operation across natural deformable terrain and water. These results show that adaptive wheel geometry provides terrain-dependent locomotion benefits and enables a single compact platform to traverse substantially different terrestrial and aquatic conditions.

0.25

Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard

eess.SY physics.bio-phcond-mat.softphysics.flu-dyn+1 ·2026-10-18 ·Ryan D. Maladen, Yang Ding, Chen Li, Daniel I. Goldman
published similarity 0.55
Abstract

The desert-dwelling sandfish (Scincus scincus) moves within dry sand, a material that displays solid and fluidlike behavior. High-speed x-ray imaging shows that below the surface, the lizard no longer uses limbs for propulsion but generates thrust to overcome drag by propagating an undulatory traveling wave down the body. Although viscous hydrodynamics can predict swimming speed in fluids such as water, an equivalent theory for granular drag is not available. To predict sandfish swimming speed, we developed an empirical model by measuring granular drag force on a small cylinder oriented at different angles relative to the displacement direction and summing these forces over the animal movement profile. The agreement between model and experiment implies that the noninertial swimming occurs in a frictional fluid.

0.32

Robotic Multiphase Interaction: Manipulating Coupled Liquid and Solid Dynamics with a World Model

cs.RO ·2026-09-18 ·Yixuan Feng, Peng Wang
similarity 0.52
Abstract · 11 pages, 6 figures, 6 tables

This work presents \textit{Robotic Multiphase Interaction (RMI)}, a setting in which liquid enters a porous material and interacts mechanically with its deforming solid skeleton. Manipulation can therefore change pore volume, expel or redistribute retained liquid, and alter grasp stability at the same time. Spilled liquid can also create safety risks in domestic and manufacturing settings. This differs from most manipulation of solid objects and from tasks that involve both liquid and solid while keeping the phases spatially separate. We study a sponge filled with water as the first RMI example. We use implicit incompressible porous flow with smoothed particle hydrodynamics as the dynamics engine and enable robotic manipulation by adding Coulomb contact memory, hybrid velocity and force regulation, and a stability gate for lifting. The resulting environment connects robot commands to changes in the coupled liquid and solid state. A world model conditioned on actions predicts how this state evolves under candidate commands, while a temporal UNet generates actions using either Diffusion Policy or rectified flow matching. Our world model reduces retained water prediction error by more than $60\%$ compared with the baseline. The best action sequence selected by the world model from policy proposals further reduces the predicted terminal water error by about half. These improvements show that modelling the coupled liquid and solid state helps the robot predict how its actions affect both the porous object and the liquid held inside.

0.31

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

cs.RO ·2026-09-27 ·Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava
similarity 0.52
Abstract

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller capable of handling multiple terrains is ideal, eliminating the need for multiple specialized controllers. We propose a multi-terrain controller to enhance the versatility and robustness of bipedal locomotion. Building on previous work with a stance ankle motor for stability on inclined and rough surfaces, this paper extends capabilities to steep wet uneven grassy slopes, and compliant terrains such as sand, gravel, rocks, and constrained terrains like staircases. To address the unique demands of these terrains, we introduce a new impact map that is essential for maintaining performance and robustness against unseen terrains. We also discuss in detail the control structure for real-time deployment on the robot. We validate our controller on the 20 degree-of-freedom Cassie bipedal robot.

0.23

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.47
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.46
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34