CS Paper Radar

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen

cs.RO ·submitted 2026-09-23 04:55 UTC · v1
code/data

Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

Closest papers

Nearest neighbours by meaning across the whole index.

OmniFish: A Bioinspired, Modular, Reconfigurable Soft Robotic Fish Enabling Multi-Modal Swimming

cs.RO physics.flu-dyn ·2026-11-18 ·Mathias Jensen, Saravana Prashanth Murali Babu
similarity 0.64
Abstract · Under review at Bioinspiration & Biomimetics. 10 figures, 7 tables

In this work, we introduce OmniFish, a bioinspired modular soft robotic fish designed to emulate the full spectrum of body and/or caudal fin (BCF) locomotion modes within a single robotic platform. The design combines morphology averaging across representative fish species with a tendon-driven compliant segmented spine whose effective stiffness can be reconfigured through progressive mechanical jamming. By selectively constraining body segments, OmniFish shifts deformation from whole-body undulation to posterior body bending and localized tail oscillation, enabling bioinspired Anguilliform, Subcarangiform, Carangiform, Thunniform, and Ostraciiform swimming using a single tendon-driven actuator. The design was guided by morphometric analysis and evaluated through caudal-fin thrust characterization, numerical body-drag simulations, kinematic analysis, and swimming performance experiments. Kinematic analysis confirmed the intended robot transition from distributed body undulation to localized tail oscillation. Swimming experiments demonstrated distinct mode-dependent performance, with the Ostraciiform configuration achieving the highest straight-line velocity of 8.14 cm/s and the lowest cost of transport of 2.42 at 1.5 tail beats/s. These proof-of-concept results show that a mechanically simple stiffness-reconfigurable architecture can generate distinct BCF swimming modes and provide a versatile strategy for developing multimodal soft robotic fish.

0.21

Water Surface Swimming in a Centipede and its Robophysical Model

cs.RO physics.bio-ph ·2026-09-22 ·Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin +2 more
similarity 0.62
Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

0.24

OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels

cs.RO ·2026-10-28 ·Francesco Iotti, Alok Ranjan, Franco Angelini, Manolo Garabini
publishedhighly cited similarity 0.61
Abstract

Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.

0.64

Multifunctional Locomotion Control of Multi-Jointed BURs with Swimming and gait Capabilities

cs.RO ·2026-09-29 ·Takumi Asada, Hideo Furuhashi, Kenta Tabata, Renato Miyagusuku, Koichi Ozaki
publishedcode/data similarity 0.61
Abstract · Preprint version of an article published in Advanced Robotics (2026)

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

0.41

MOSS: Multimodal Origami Swamp Robot System

cs.RO ·2026-10-16 ·Tian Lan, Atar Babgei, Luca Romanello, Mirko Kovac, Sophie F. Armanini
similarity 0.60
Abstract · 8 pages, 8 figures, submitted to ICRA 2027

Robotic systems for environmental monitoring and ecological surveying in wetlands and swamps must operate across diverse terrestrial and aquatic conditions. Conventional fixed-geometry wheels cannot adapt their contact geometry to these varying conditions. This work presents MOSS (Multimodal Origami Swamp Robot System), a compact amphibious robotic platform with 3D-printed origami wheels. The compact crank mechanism switches the wheel between contracted and expanded configurations, changing its width, body diameter, and fin orientation simultaneously. The contracted configuration is better suited to efficient rolling on firmer ground, whereas the expanded configuration provides greater contact and terrain engagement on softer surfaces. MOSS was evaluated on soil, sand, mud with varying water content, and water, in addition to in-motion morphing and terrestrial-aquatic transition tests. The more energy-efficient wheel configuration depended on terrain. The contracted configuration achieved a lower cost of transport on firmer soil and mud, whereas the expanded configuration performed better on wetter mud, sand, and water, reducing the cost of transport by up to 29%. Expanded wheels also reduced slip in wet mud and reduced both slip and hub sinkage in sand. MOSS successfully completed configuration changes in $1.95 \pm 0.11$ s and demonstrated continuous locomotion across soil-mud-water transitions. Outdoor trials further demonstrated operation across natural deformable terrain and water. These results show that adaptive wheel geometry provides terrain-dependent locomotion benefits and enables a single compact platform to traverse substantially different terrestrial and aquatic conditions.

0.25

Hydrodynamics of robotic micro-swimmers in confinement

cs.RO cond-mat.softphysics.flu-dyn ·2026-11-18 ·Giovanni Corsi, Giovanni Noselli, Antonio DeSimone
published similarity 0.59
Abstract

Inspired by seminal work by E.M. Purcell, we discuss the problem of predicting and optimizing the performance of autonomous robots swimming in confinement. Our approach is based on the explicit numerical resolution of the fluid flow induced by the swimmer, and it is validated experimentally on a cm-size prototype composed of a cargo head and a rotating propulsive tail. Using hydrodynamic scaling, we predict the performance of replicas of our prototype scaled down to mm- and sub-mm-size to test the feasibility of autonomous micro-robots navigating in narrow vessels. The main result of our theoretical, computational, and experimental analysis is that, while hydrodynamics seems to place no fundamental obstruction to the vision of autonomous micro-robots navigating in narrow lumens inside the human body, it does provide useful and strict guidelines for rational design at different length scales.

0.31

Optimal control of a swimming robot based on Purcell's microswimmer model

cs.RO physics.flu-dynmath.OC ·2026-08-18 ·Noam Berkovich Lahav, Oren Wiezel, Yizhar Or
similarity 0.58
Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

0.16

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.57
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34