CS Paper Radar

Optimal control of a swimming robot based on Purcell's microswimmer model

Noam Berkovich Lahav, Oren Wiezel, Yizhar Or

cs.RO physics.flu-dynmath.OC ·submitted 2026-08-18 07:34 UTC · v2

Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling and Control of an Eel-Inspired Soft Robot for Design Optimization

cs.RO ·2026-08-14 ·Zhangjingyi Jiang, Mark Campbell
published similarity 0.63
Abstract

Anguilliform locomotion is a highly efficient swimming mode; the advent of new materials for soft robots enables the development of an eel-inspired soft robot. This paper presents a simulation model of an eel-inspired soft robot designed for anguilliform swimming. This model can aid in design optimization and the development of model-based estimation, reasoning, and control systems. A Finite Element Method (FEM) model of an elastic rod is used to capture the soft materials of the robotic fish, which makes it particularly amenable to variation over time as the material properties change. The material model is coupled with a hydrodynamic force model to simulate the behavior of a soft, elongated robot in water. The model is used to demonstrate the effectiveness of the proposed control approaches in achieving desired swimming behaviors. It also provides insights into design decisions, including the robustness of different system configurations and the impact of material degradation and failure. The results show that slightly asymmetric designs are advantageous, offering comparable swimming velocities but greater maneuverability. This model can be used to guide future robotic design decisions aimed at optimizing performance for specific tasks.

0.56

Water Surface Swimming in a Centipede and its Robophysical Model

cs.RO physics.bio-ph ·2026-09-22 ·Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin +2 more
similarity 0.61
Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

0.24

Swim-and-Breach at Palm Scale: A Rudder-Steered Two-Propeller Underwater Robot Platform with Differential-Thrust Pitch Control

cs.RO physics.flu-dyn ·2026-09-15 ·Daehyun Choi, Ian Bergerson, Hengjia Zhu, Tianjun Lan, Saad Bhamla
similarity 0.61
Abstract

We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.

0.27

Multifunctional Locomotion Control of Multi-Jointed BURs with Swimming and gait Capabilities

cs.RO ·2026-09-29 ·Takumi Asada, Hideo Furuhashi, Kenta Tabata, Renato Miyagusuku, Koichi Ozaki
publishedcode/data similarity 0.61
Abstract · Preprint version of an article published in Advanced Robotics (2026)

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

0.41

To Coordinate or Not to Coordinate? Learning to Swim with Eight Soft Arms

cs.RO ·2026-11-02 ·Junkai Chen, Dehan Yuan, Yiyuan Zhang, Yu Duan, Fan Shi +2 more
similarity 0.60
Abstract · 8 pages, 7 figures

Does effective swimming with multiple underactuated soft arms require explicit coordination between arms? We hypothesize that an eight-arm swimmer can control its swimming speed and direction by independently learning each arm's actuation amplitude under a shared rhythmic drive, without prescribed inter-arm phase coupling. To test this hypothesis, we compare three reinforcement learning-based control strategies using proximal policy optimization (PPO): (1) learning arm-specific actuation amplitudes without inter-arm phase coupling, (2) learning actuation amplitudes with prescribed inter-arm phase coupling, and (3) directly learning actuator commands through end-to-end PPO without an explicit rhythmic structure. Across 200 episodes with randomized three-dimensional velocity commands, the controller without phase coupling satisfies the tracking criterion in 169 episodes, compared with 117 for the phase-coupled controller and 28 for end-to-end PPO. Straight-line swimming and commanded direction-change trials further demonstrate more accurate velocity tracking without phase coupling. These findings suggest that effective eight-arm swimming does not require prescribed inter-arm phase coupling, but can instead be achieved through learned arm-specific amplitude modulation within a rhythmic control structure.

0.32

Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard

eess.SY physics.bio-phcond-mat.softphysics.flu-dyn+1 ·2026-10-18 ·Ryan D. Maladen, Yang Ding, Chen Li, Daniel I. Goldman
published similarity 0.59
Abstract

The desert-dwelling sandfish (Scincus scincus) moves within dry sand, a material that displays solid and fluidlike behavior. High-speed x-ray imaging shows that below the surface, the lizard no longer uses limbs for propulsion but generates thrust to overcome drag by propagating an undulatory traveling wave down the body. Although viscous hydrodynamics can predict swimming speed in fluids such as water, an equivalent theory for granular drag is not available. To predict sandfish swimming speed, we developed an empirical model by measuring granular drag force on a small cylinder oriented at different angles relative to the displacement direction and summing these forces over the animal movement profile. The agreement between model and experiment implies that the noninertial swimming occurs in a frictional fluid.

0.32

All You Need Is Low Fidelity: Zero-Shot Sim-to-Real of Learned Robotic Fish Control

cs.RO ·2026-09-29 ·Liam Maloney, Simon Ramchandani, Mike Y. Michelis, Ronan Hinchet, Robert K. Katzschmann
similarity 0.59
Abstract · 8 pages, 10 figures, submitted to ICRA 2027. Liam Maloney and Simon Ramchandani contributed equally

Complex tasks for underwater robots remain limited by the capabilities of their controllers. Learning a better one for a soft, underactuated robotic fish trades simulator cost against fidelity. We show that an intentionally low-fidelity simulator is enough: a stateless, quasi-steady fluid model with no wake and no added-mass history suffices to learn a \emph{general}, closed-loop controller that transfers to hardware without tuning. Our platform is a soft, single-motor, tendon-driven fish whose policy observes only what the hardware can measure. A staged pipeline grounds the simulator in two independent identifications, fixing the tail dynamics and a stateless fluid model; the policy then acts through a band-limited rhythmic trajectory generator rather than commanding the tail directly. Deployed unchanged in an outdoor pool, a single policy performs closed-loop target reaching, disturbance rejection, and out-of-distribution target acquisition and tracking. The transfer rests on the constraint rather than the fidelity: the generator cannot leave the band over which the fluid was identified. This raises the question of how much of the physics can reside in the controller rather than in the simulator.

0.25

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.58
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44