CS Paper Radar

Swim-and-Breach at Palm Scale: A Rudder-Steered Two-Propeller Underwater Robot Platform with Differential-Thrust Pitch Control

Daehyun Choi, Ian Bergerson, Hengjia Zhu, Tianjun Lan, Saad Bhamla

cs.RO physics.flu-dyn ·submitted 2026-09-15 14:19 UTC · v1

Abstract

We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Hydrodynamics of robotic micro-swimmers in confinement

cs.RO cond-mat.softphysics.flu-dyn ·2026-11-18 ·Giovanni Corsi, Giovanni Noselli, Antonio DeSimone
published similarity 0.68
Abstract

Inspired by seminal work by E.M. Purcell, we discuss the problem of predicting and optimizing the performance of autonomous robots swimming in confinement. Our approach is based on the explicit numerical resolution of the fluid flow induced by the swimmer, and it is validated experimentally on a cm-size prototype composed of a cargo head and a rotating propulsive tail. Using hydrodynamic scaling, we predict the performance of replicas of our prototype scaled down to mm- and sub-mm-size to test the feasibility of autonomous micro-robots navigating in narrow vessels. The main result of our theoretical, computational, and experimental analysis is that, while hydrodynamics seems to place no fundamental obstruction to the vision of autonomous micro-robots navigating in narrow lumens inside the human body, it does provide useful and strict guidelines for rational design at different length scales.

0.31

All You Need Is Low Fidelity: Zero-Shot Sim-to-Real of Learned Robotic Fish Control

cs.RO ·2026-09-29 ·Liam Maloney, Simon Ramchandani, Mike Y. Michelis, Ronan Hinchet, Robert K. Katzschmann
similarity 0.63
Abstract · 8 pages, 10 figures, submitted to ICRA 2027. Liam Maloney and Simon Ramchandani contributed equally

Complex tasks for underwater robots remain limited by the capabilities of their controllers. Learning a better one for a soft, underactuated robotic fish trades simulator cost against fidelity. We show that an intentionally low-fidelity simulator is enough: a stateless, quasi-steady fluid model with no wake and no added-mass history suffices to learn a \emph{general}, closed-loop controller that transfers to hardware without tuning. Our platform is a soft, single-motor, tendon-driven fish whose policy observes only what the hardware can measure. A staged pipeline grounds the simulator in two independent identifications, fixing the tail dynamics and a stateless fluid model; the policy then acts through a band-limited rhythmic trajectory generator rather than commanding the tail directly. Deployed unchanged in an outdoor pool, a single policy performs closed-loop target reaching, disturbance rejection, and out-of-distribution target acquisition and tracking. The transfer rests on the constraint rather than the fidelity: the generator cannot leave the band over which the fluid was identified. This raises the question of how much of the physics can reside in the controller rather than in the simulator.

0.25

Towards Physical Underwater Robotic Assistance for Scuba Diver Movement in Confined Spaces

cs.RO ·2026-10-01 ·Demetrious T. Kutzke, Junaed Sattar
similarity 0.63
Abstract

Scuba divers are taught to control their depth to avoid rapid ascents and descents, which could result in serious injuries such as gas embolisms and barotrauma. However, many underwater tasks necessitate lateral control, maintaining distance between subsea structures such as coral reefs, submerged drilling instrumentation, or unexploded ordnance. In this work, we discuss a first-of-its-kind wearable robotic solution providing thruster-actuated directional guidance to a diver, as distinct from prior propulsive-assistance exoskeletons. We introduce ``Robotic Assisted Diver Movement in Confined Spaces'' (RADMCS), a wearable robot that assists divers in maintaining a fixed distance from subsea structures by leveraging perception techniques in monocular depth estimation and force-feedback from submersible thrusters to provide haptic feedback. Its small and compact form factor creates a foundational platform that could be expanded to include more sophisticated control and navigation behaviors. We present results from Institutional Review Board (IRB) in-water studies with eight human scuba diver participants on threshold sensitivity tests in both a closed-water swimming facility and ocean environments; distance-maintaining experiments in a closed-water facility; and form, fit, and function testing in the ocean. We demonstrate that relatively low thrust values (10 percent of maximum) allow robotic direction of a human's movement using the physical sensation of the robot's guidance.

0.19

Multifunctional Locomotion Control of Multi-Jointed BURs with Swimming and gait Capabilities

cs.RO ·2026-09-29 ·Takumi Asada, Hideo Furuhashi, Kenta Tabata, Renato Miyagusuku, Koichi Ozaki
publishedcode/data similarity 0.62
Abstract · Preprint version of an article published in Advanced Robotics (2026)

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

0.41

Design and Attitude Control of an Underwater Quadruped Robot

cs.RO ·2026-09-06 ·Davide Molinaroli, Mohit Singh, Kostas Alexis
published similarity 0.61
Abstract · 16 pages, 8 figures. Accepted to ISRR 2026

Legged robots are versatile on land, but their use in underwater environments remains limited. Extending quadruped locomotion to water enables amphibious mobility with applications in inspection, environmental monitoring and disaster response. This paper presents the design, modeling, and experimental validation of a reproducible underwater quadruped robot. The robot is built around custom waterproof motor housings machined from polyoxymethylene plastic, which use off-the-shelf O-rings and dynamic shaft seals. A simplified model is derived to describe the dynamics of this underwater legged system, capturing how drag forces on spherical end effectors transmit torque to the floating base. Building on this model, a closed-loop attitude controller is developed using an error formulation defined on the special orthogonal group SO(3). The controller is evaluated both in simulation and experimentally in a water tank, where the robot tracks desired orientation setpoints in roll, pitch and yaw.

0.36

Optimal control of a swimming robot based on Purcell's microswimmer model

cs.RO physics.flu-dynmath.OC ·2026-08-18 ·Noam Berkovich Lahav, Oren Wiezel, Yizhar Or
similarity 0.61
Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

0.16

Advancing Accessible Underwater Robotics: The Mini-Girona I-AUV at RAMI 2025

cs.RO ·2026-09-02 ·Taqi Hamoda, Bilal Ahmed, Deborah Ele-Ojo, Thi Tran Ha Bao, Adel Saidani +7 more
published similarity 0.61
Abstract

The Mini-Girona Intervention Autonomous Underwater Vehicle (I-AUV) represents an advancement in accessible underwater robotics, designed to bridge the gap between costly, specialized research AUVs and basic Remotely Operated Vehicles (ROVs). Developed with a focus on affordability and usability, the Mini-Girona, priced at approximately $50,000, integrates advanced components such as a 5-DOF manipulator arm, stereo vision, and AI-driven processing for autonomous navigation and intervention tasks. This paper presents the design and development of the Mini-Girona, detailing its performance during the RAMI 2025 student competition. Despite challenges such as thermal management issues and restricted team access, the Mini-Girona achieved second place overall, excelling in vision-based perception and intervention tasks. This work highlights the platform's potential as a tool for underwater robotics research and education, fostering innovation in real-world underwater applications.

0.38

MarineCraft: Enabling Rapid Prototyping of Underwater Robots via Modular Construction

cs.RO cs.HC ·2026-09-18 ·Yuta Sugiura
similarity 0.59
Abstract

Underwater robot development is often hindered by the complexities of waterproofing and wiring, which significantly delay the rapid prototyping process. This paper presents MarineCraft, a modular toolkit designed to accelerate the development cycle through structural reconfiguration. The system features self-contained, waterproof propulsion modules that integrate power, wireless communication, and actuation. By eliminating centralized wiring and the need for repeated sealing, MarineCraft allows diverse robot geometries to be assembled and tested in minutes rather than days. Experimental results demonstrate that this reconfigurable architecture enables fast, iterative design cycles while maintaining reliable operation and leak-free performance at depths of up to 2.5 meters. Our toolkit effectively lowers the barrier to underwater robotics by transforming modularity into a vehicle for rapid physical prototyping.

0.20