CS Paper Radar

Hydrodynamics of robotic micro-swimmers in confinement

Giovanni Corsi, Giovanni Noselli, Antonio DeSimone

cs.RO cond-mat.softphysics.flu-dyn ·submitted 2026-11-18 15:44 UTC · v1
published

Abstract

Inspired by seminal work by E.M. Purcell, we discuss the problem of predicting and optimizing the performance of autonomous robots swimming in confinement. Our approach is based on the explicit numerical resolution of the fluid flow induced by the swimmer, and it is validated experimentally on a cm-size prototype composed of a cargo head and a rotating propulsive tail. Using hydrodynamic scaling, we predict the performance of replicas of our prototype scaled down to mm- and sub-mm-size to test the feasibility of autonomous micro-robots navigating in narrow vessels. The main result of our theoretical, computational, and experimental analysis is that, while hydrodynamics seems to place no fundamental obstruction to the vision of autonomous micro-robots navigating in narrow lumens inside the human body, it does provide useful and strict guidelines for rational design at different length scales.

DOI
10.1103/pjxx-5vd4

Closest papers

Nearest neighbours by meaning across the whole index.

Optimal control of a swimming robot based on Purcell's microswimmer model

cs.RO physics.flu-dynmath.OC ·2026-08-18 ·Noam Berkovich Lahav, Oren Wiezel, Yizhar Or
similarity 0.72
Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

0.16

Swim-and-Breach at Palm Scale: A Rudder-Steered Two-Propeller Underwater Robot Platform with Differential-Thrust Pitch Control

cs.RO physics.flu-dyn ·2026-09-15 ·Daehyun Choi, Ian Bergerson, Hengjia Zhu, Tianjun Lan, Saad Bhamla
similarity 0.68
Abstract

We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.

0.27

Vision-Guided Closed-Loop Autonomous Navigation of Light-Driven Janus Microbots

cs.RO cond-mat.soft ·2026-10-15 ·Kanhu Charan Andia, Harsh Prashant Katole, Parth Nitinkumar Bhosale, Hemant Kumar, Dhruv Pratap Singh
similarity 0.61
Abstract · 26 pages, 7 Figures

Artificial microbots capable of precise and autonomous navigation could provide versatile platforms for microscale transport, manipulation, and task execution in complex environments. However, reliable navigation becomes increasingly challenging at the micrometre scale, particularly when the surrounding environment changes dynamically. Here, we develop a vision-guided closed-loop navigation framework for light-driven cube-shaped hematite/TiO2 Janus microbots with a characteristic size of approximately 3 μm. Real-time visual localization using a custom-trained YOLOv11 object-detection model is integrated with discretized waypoint-based magnetic steering to enable precise navigation along complex prescribed trajectories, with more than 90% of the measured trajectory deviations remaining below 6 μm across the tested path geometries. The framework further enables arbitrary user-defined free-hand trajectories and autonomous navigation through a physically confined maze. In dynamically changing environments, A* path planning enables real-time path replanning while avoiding multiple independently swimming 5 μm spherical Janus micromotors. Finally, the microbot selectively captures multiple cargo particles and autonomously transports and delivers them to a predefined location while simultaneously avoiding dynamic obstacles. These results establish an integrated platform combining programmable trajectory control, autonomous path planning, real-time environmental adaptation, and task execution within a single light-driven Janus microbot system.

0.19

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.59
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Water Surface Swimming in a Centipede and its Robophysical Model

cs.RO physics.bio-ph ·2026-09-22 ·Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin +2 more
similarity 0.58
Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

0.24

Towards Physical Underwater Robotic Assistance for Scuba Diver Movement in Confined Spaces

cs.RO ·2026-10-01 ·Demetrious T. Kutzke, Junaed Sattar
similarity 0.57
Abstract

Scuba divers are taught to control their depth to avoid rapid ascents and descents, which could result in serious injuries such as gas embolisms and barotrauma. However, many underwater tasks necessitate lateral control, maintaining distance between subsea structures such as coral reefs, submerged drilling instrumentation, or unexploded ordnance. In this work, we discuss a first-of-its-kind wearable robotic solution providing thruster-actuated directional guidance to a diver, as distinct from prior propulsive-assistance exoskeletons. We introduce ``Robotic Assisted Diver Movement in Confined Spaces'' (RADMCS), a wearable robot that assists divers in maintaining a fixed distance from subsea structures by leveraging perception techniques in monocular depth estimation and force-feedback from submersible thrusters to provide haptic feedback. Its small and compact form factor creates a foundational platform that could be expanded to include more sophisticated control and navigation behaviors. We present results from Institutional Review Board (IRB) in-water studies with eight human scuba diver participants on threshold sensitivity tests in both a closed-water swimming facility and ocean environments; distance-maintaining experiments in a closed-water facility; and form, fit, and function testing in the ocean. We demonstrate that relatively low thrust values (10 percent of maximum) allow robotic direction of a human's movement using the physical sensation of the robot's guidance.

0.19

Fluidic Body: Swarm Robots as a Fluid Extension of the Hand

cs.HC cs.RO ·2026-11-04 ·Michikuni Eguchi, Shigeo Yoshida, Mai Nishimura, Takefumi Hiraki
published similarity 0.56
Abstract · accepted to ACM ISS 2026 (ISS track of PACMHCI)

Swarm robots have attracted growing interest as a physical interface for human--computer interaction, since a swarm can reshape its formation to fit the objects and surroundings it works with. For a human operator, however, adapting the swarm's behavior remains difficult. Most existing methods require the user to specify where the swarm should go, and they offer no intuitive way to change the collective's behavior as each task demands. We present Fluidic Body, a system that lets a person operate a swarm of fluid-imitating robots as an extension of the hand. The system places a virtual fluid between the hand and the swarm, and the user adapts the swarm's behavior to each task by changing the fluid's properties through simple hand movements. When the user opens the hand, the swarm becomes soft enough to deform and flow around obstacles. Closing the hand turns it into a hard, cohesive body that can push objects. We evaluated the controller's performance and its operability in two simulation experiments and one demonstration with physical robots. First, our controller handled both obstacle avoidance and object transportation better than an existing method that behaves the same way in every task. Second, in a VR user study, 17 participants completed the combined avoidance-and-transportation task faster and more reliably than with that method. They also reported a lower workload and a stronger sense of agency. Finally, this experience carried over to physical robots in a real-world demonstration (88 participants). These results suggest that treating a swarm as a fluid, a material people already understand, allows a robot swarm to work as a deformable extension of the human body.

0.34

All You Need Is Low Fidelity: Zero-Shot Sim-to-Real of Learned Robotic Fish Control

cs.RO ·2026-09-29 ·Liam Maloney, Simon Ramchandani, Mike Y. Michelis, Ronan Hinchet, Robert K. Katzschmann
similarity 0.56
Abstract · 8 pages, 10 figures, submitted to ICRA 2027. Liam Maloney and Simon Ramchandani contributed equally

Complex tasks for underwater robots remain limited by the capabilities of their controllers. Learning a better one for a soft, underactuated robotic fish trades simulator cost against fidelity. We show that an intentionally low-fidelity simulator is enough: a stateless, quasi-steady fluid model with no wake and no added-mass history suffices to learn a \emph{general}, closed-loop controller that transfers to hardware without tuning. Our platform is a soft, single-motor, tendon-driven fish whose policy observes only what the hardware can measure. A staged pipeline grounds the simulator in two independent identifications, fixing the tail dynamics and a stateless fluid model; the policy then acts through a band-limited rhythmic trajectory generator rather than commanding the tail directly. Deployed unchanged in an outdoor pool, a single policy performs closed-loop target reaching, disturbance rejection, and out-of-distribution target acquisition and tracking. The transfer rests on the constraint rather than the fidelity: the generator cannot leave the band over which the fluid was identified. This raises the question of how much of the physics can reside in the controller rather than in the simulator.

0.25