CS Paper Radar

Water Surface Swimming in a Centipede and its Robophysical Model

Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin, Tianyu Wang, Daniel I. Goldman

cs.RO physics.bio-ph ·submitted 2026-09-22 21:39 UTC · v1

Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

Closest papers

Nearest neighbours by meaning across the whole index.

Multifunctional Locomotion Control of Multi-Jointed BURs with Swimming and gait Capabilities

cs.RO ·2026-09-29 ·Takumi Asada, Hideo Furuhashi, Kenta Tabata, Renato Miyagusuku, Koichi Ozaki
publishedcode/data similarity 0.67
Abstract · Preprint version of an article published in Advanced Robotics (2026)

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

0.41

OmniFish: A Bioinspired, Modular, Reconfigurable Soft Robotic Fish Enabling Multi-Modal Swimming

cs.RO physics.flu-dyn ·2026-11-18 ·Mathias Jensen, Saravana Prashanth Murali Babu
similarity 0.65
Abstract · Under review at Bioinspiration & Biomimetics. 10 figures, 7 tables

In this work, we introduce OmniFish, a bioinspired modular soft robotic fish designed to emulate the full spectrum of body and/or caudal fin (BCF) locomotion modes within a single robotic platform. The design combines morphology averaging across representative fish species with a tendon-driven compliant segmented spine whose effective stiffness can be reconfigured through progressive mechanical jamming. By selectively constraining body segments, OmniFish shifts deformation from whole-body undulation to posterior body bending and localized tail oscillation, enabling bioinspired Anguilliform, Subcarangiform, Carangiform, Thunniform, and Ostraciiform swimming using a single tendon-driven actuator. The design was guided by morphometric analysis and evaluated through caudal-fin thrust characterization, numerical body-drag simulations, kinematic analysis, and swimming performance experiments. Kinematic analysis confirmed the intended robot transition from distributed body undulation to localized tail oscillation. Swimming experiments demonstrated distinct mode-dependent performance, with the Ostraciiform configuration achieving the highest straight-line velocity of 8.14 cm/s and the lowest cost of transport of 2.42 at 1.5 tail beats/s. These proof-of-concept results show that a mechanically simple stiffness-reconfigurable architecture can generate distinct BCF swimming modes and provide a versatile strategy for developing multimodal soft robotic fish.

0.21

Sensing via whole-body interactions with complex terrains: physical insights from robotic models

cs.RO physics.bio-pheess.SY ·2026-10-11 ·Chen Li
similarity 0.64
Abstract · 8 figures

In nature, animals interact with complex terrains and often generate forces, deformations, and vibrations across the body and environment. Such interaction-induced mechanical information may guide behavior, yet its generation and use are difficult to resolve because movement rapidly and continually reconfigures the interactions that produce it. Sensory neurophysiology and biomechanics have revealed how mechanical information is transformed within sensory, neural, and musculoskeletal subsystems, whereas studies in complex terrains reveal rich whole-body interactions and behavioral outcomes. Connecting these levels remains a challenge. Here, I present a focused perspective on how biologically guided robotic physical models can help identify candidate mechanical information generated through whole-body interactions, test its physical mechanisms and behavioral benefits, and generate biological hypotheses. Three case studies illustrate this approach, multi-legged locomotor transitions to traverse dense clutter, limbless vertical body bending to propel through uneven terrain, and rapid spider leg crouching to help vibration sensing of prey on a web. Across these systems, correspondence between robots and animals supports the biological plausibility of these candidate physical mechanisms and motivates better measurements and models to determine how the relevant mechanical information is sensed and used to modulate behavior.

0.25

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.62
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Optimal control of a swimming robot based on Purcell's microswimmer model

cs.RO physics.flu-dynmath.OC ·2026-08-18 ·Noam Berkovich Lahav, Oren Wiezel, Yizhar Or
similarity 0.61
Abstract

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

0.16

Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard

eess.SY physics.bio-phcond-mat.softphysics.flu-dyn+1 ·2026-10-18 ·Ryan D. Maladen, Yang Ding, Chen Li, Daniel I. Goldman
published similarity 0.61
Abstract

The desert-dwelling sandfish (Scincus scincus) moves within dry sand, a material that displays solid and fluidlike behavior. High-speed x-ray imaging shows that below the surface, the lizard no longer uses limbs for propulsion but generates thrust to overcome drag by propagating an undulatory traveling wave down the body. Although viscous hydrodynamics can predict swimming speed in fluids such as water, an equivalent theory for granular drag is not available. To predict sandfish swimming speed, we developed an empirical model by measuring granular drag force on a small cylinder oriented at different angles relative to the displacement direction and summing these forces over the animal movement profile. The agreement between model and experiment implies that the noninertial swimming occurs in a frictional fluid.

0.32

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.59
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Hip Energized Monopedal Hopping

cs.RO ·2026-08-11 ·Shane Rozen-Levy, Griffon McMahon, Daniel Koditschek
similarity 0.59
Abstract · 35 pages, 11 figures

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

0.10