CS Paper Radar

Hip Energized Monopedal Hopping

Shane Rozen-Levy, Griffon McMahon, Daniel Koditschek

cs.RO ·submitted 2026-08-11 02:28 UTC · v1

Abstract

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

Comment
35 pages, 11 figures

Closest papers

Nearest neighbours by meaning across the whole index.

When to Waddle: A Comparative Study of Bipedal Torso-Stabilization on Low-Friction Surfaces

cs.RO ·2026-09-18 ·Ben Gu, Naomi Oke, George Ortiz, Stacy Ashlyn, Cordelia Pride +2 more
similarity 0.69
Abstract

Low-friction surfaces challenge bipedal locomotion by limiting the contact forces available during stepping. Inspired by penguin waddling, we investigate how lateral torso motion and center of mass (COM) placement affect locomotion as surface friction changes. Using a five-actuator biped, we compare an upright-gait strategy with a penguin-inspired torso-over-stance-leg strategy across multiple COM placements in simulation and hardware. In the 3-D simulator MuJoCo, we sweep through sinusoidal leg and hip actuation parameters across four friction coefficients mu = 0.1, 0.3, 0.5, 0.7. In simulation, torso-over-stance-leg motion produces more successful controllers and higher forward speeds at low friction, with the highest speed occurring for the high-COM configuration. Hardware experiments show the same low-friction speed trend: at mu=0.12, torso-over-stance-leg motion increases forward speed and reduces cost of transport at both tested COM ratios, and the higher COM also improves both measures. The high-COM penguin configuration is the fastest and most energy efficient while maintaining low sideways foot motion. At mu=0.45, the COM trend reverses: the lower-COM configurations are faster and more energy efficient, while gait strategy has little effect on forward speed but still changes sideways foot motion. These results show that the effects of lateral torso motion and COM placement depend on the available friction, and that forward speed, energy use, and slip-related foot motion can be modulated with a penguin-inspired torso motion on hardware.

0.22

Central pivot point control of a body-attached spring-mass runner: periodic gaits, stabilization, template embedding and approximate analytic return maps

cs.RO eess.SYmath.DSphysics.bio-ph ·2026-11-02 ·İzel Sever, O. Kaan Karagöz, M. Mert Ankaralı
similarity 0.68
Abstract · 21 pages, 15 figures. Submitted to Chaos: An Interdisciplinary Journal of Nonlinear Science

The spring-loaded inverted pendulum (SLIP) describes the center-of-mass (COM) motion of runners but has no trunk. In trunk models, the hip torque couples posture and COM motion and destroys the central-force structure on which SLIP analysis relies. As a result, trunk models have been studied almost only numerically. We show that this structure can be restored. The central pivot point (CPP), a hip-torque law that directs the ground reaction force through the COM, decouples pitch exactly and reduces stance to a planar central-force problem. At upright posture, time-reversal symmetry produces one-parameter families of periodic gaits. A stance-phase pitch law and a stride-level regulator stabilize all computed gaits, also with bounded hip torque and friction. Under CPP, any radial force law in virtual-leg coordinates can be embedded independently of posture. For a linear radial template, the stance radius and the constant-momentum sweep have exact closed forms. With a new gravity correction, the resulting analytic return map, to our knowledge the first for a trunk model, predicts liftoff velocity and apex position with mean errors of 1.6% and 0.9%. The natural gaits of the embedded runner are symmetric and need no force step at touchdown. A near-reversibility argument explains their unit multiplier, and a scalar equation predicts them within 0.8%. A deadbeat stride controller based on the analytic map tracks changes of speed, height and posture. CPP thus makes trunk models accessible to the analytic tools developed for SLIP.

0.29

Low-speed Limit Cycle Walking of Planar X-shaped Bipedal Robot with Special Properties

cs.RO ·2026-11-17 ·Fumihiko Asano, Cong Yan
published similarity 0.67
Abstract · 6 pages, 7 figures. Published in the Proceedings of IEEE ICARM 2023. This author version corrects bibliographic information and minor typogr…

This paper proposes a novel planar semicircular-footed X-shaped bipedal robot in which the center of mass of each leg link is at the same position as the hip joint, and discusses a method for generating a stable limit cycle gait on level ground. First, we outline the assumptions of the robot model with four degrees of freedom, and develop the mathematical equations of motion and collision. Second, we set the relative hip-joint angle as a control output and design a control system to follow it to the desired trajectory specified as a fifth-order function of time. Third, we mathematically show that there are special properties: the angular velocity of the swing leg does not change before and after the collision, and the time-integral of the control input becomes zero in a steady gait. We also mathematically show that the model has the feature that approximate linearization is effective and the antigravity effect of semicircular feet can be utilized. Through numerical simulations, we verify the validity of the theoretical results, and analyze some fundamental gait properties such as convergence speed and mechanical energy restoration.

0.36

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.65
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.64
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.64
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Design and Analysis of a Nonlinear Parallel Mechanism Coupling for Dynamic Humanoid Legs

cs.RO ·2026-10-12 ·Rohit Kumar, Heiner Peters, Felix Wiebe, Franek Stark, Janne Janzen +3 more
similarity 0.63
Abstract

Humanoids increasingly demand lightweight leg mechanisms for agile, dynamic, and energy-efficient locomotion. Reducing distal inertia through proximal actuation has thus become a common design goal. Yet, compact transmissions that preserve torque capability and efficient force transmission remain hard to achieve. This paper presents a novel series-parallel leg design combining a knee parallel mechanism, an ankle parallel mechanism, and a nonlinear knee-ankle coupling where all actuators placed closer to the hip. As the knee flexes, the coupling passively assists ankle dorsiflexion for foot clearance and, as it extends it assists plantarflexion for push-off, redistributing ankle load through the knee transmission. We derive the coupling's nonlinear transmission models and validate them in simulation and on hardware. The design shows that the shared transmission lets both joints draw on each other's actuator capacity by easing the knee's peak torque demand under load and the ankle's peak speed demand during fast motion. With the leg's proximal actuator placement, the leg achieves an effective reflected mass of 0.37 kg at the foot for a 6 kg leg, demonstrating very low distal leg inertia for dynamic humanoid robots.

0.12

Walking on the Slope: Stable Bipedal Gaits with Genetic-Algorithm-Optimized Trajectories

cs.RO ·2026-09-17 ·Madhav Rijal
similarity 0.63
Abstract

This paper presents the kinematic and dynamic modeling, trajectory generation, and stability analysis of an 8-degree-of-freedom (DOF) biped robot walking on flat and inclined terrain. Denavit-Hartenberg (DH) parameters and homogeneous transformations are used to derive the forward kinematics, while closed-form inverse kinematics maps the desired hip and swing-foot Cartesian trajectories, generated with cubic splines, to joint angles. Joint torques are computed using the Newton-Euler iterative algorithm, and dynamic stability is evaluated using the zero moment point (ZMP) criterion. A genetic algorithm (GA) optimizes the hip height, maximum swing-foot lift, and frontal-plane tilt angle by minimizing the work done by the joints subject to a ZMP feasibility penalty. Simulation results in MATLAB show that the nominal 8-DOF model remains ZMP-stable for step completion times down to 0.5 s and for slope inclinations up to 22.5 degrees with the given foot geometry. Beyond these limits, the ZMP leaves the support polygon, and either the foot dimensions or the trajectory parameters must be modified. The results also show that ZMP stability is governed by the mass distribution among the links rather than the total mass of the robot.

0.20