CS Paper Radar

When to Waddle: A Comparative Study of Bipedal Torso-Stabilization on Low-Friction Surfaces

Ben Gu, Naomi Oke, George Ortiz, Stacy Ashlyn, Cordelia Pride, Sarah Bergbreiter, Aaron M. Johnson

cs.RO ·submitted 2026-09-18 01:07 UTC · v2

Abstract

Low-friction surfaces challenge bipedal locomotion by limiting the contact forces available during stepping. Inspired by penguin waddling, we investigate how lateral torso motion and center of mass (COM) placement affect locomotion as surface friction changes. Using a five-actuator biped, we compare an upright-gait strategy with a penguin-inspired torso-over-stance-leg strategy across multiple COM placements in simulation and hardware. In the 3-D simulator MuJoCo, we sweep through sinusoidal leg and hip actuation parameters across four friction coefficients mu = 0.1, 0.3, 0.5, 0.7. In simulation, torso-over-stance-leg motion produces more successful controllers and higher forward speeds at low friction, with the highest speed occurring for the high-COM configuration. Hardware experiments show the same low-friction speed trend: at mu=0.12, torso-over-stance-leg motion increases forward speed and reduces cost of transport at both tested COM ratios, and the higher COM also improves both measures. The high-COM penguin configuration is the fastest and most energy efficient while maintaining low sideways foot motion. At mu=0.45, the COM trend reverses: the lower-COM configurations are faster and more energy efficient, while gait strategy has little effect on forward speed but still changes sideways foot motion. These results show that the effects of lateral torso motion and COM placement depend on the available friction, and that forward speed, energy use, and slip-related foot motion can be modulated with a penguin-inspired torso motion on hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

Hip Energized Monopedal Hopping

cs.RO ·2026-08-11 ·Shane Rozen-Levy, Griffon McMahon, Daniel Koditschek
similarity 0.69
Abstract · 35 pages, 11 figures

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

0.10

Central pivot point control of a body-attached spring-mass runner: periodic gaits, stabilization, template embedding and approximate analytic return maps

cs.RO eess.SYmath.DSphysics.bio-ph ·2026-11-02 ·İzel Sever, O. Kaan Karagöz, M. Mert Ankaralı
similarity 0.65
Abstract · 21 pages, 15 figures. Submitted to Chaos: An Interdisciplinary Journal of Nonlinear Science

The spring-loaded inverted pendulum (SLIP) describes the center-of-mass (COM) motion of runners but has no trunk. In trunk models, the hip torque couples posture and COM motion and destroys the central-force structure on which SLIP analysis relies. As a result, trunk models have been studied almost only numerically. We show that this structure can be restored. The central pivot point (CPP), a hip-torque law that directs the ground reaction force through the COM, decouples pitch exactly and reduces stance to a planar central-force problem. At upright posture, time-reversal symmetry produces one-parameter families of periodic gaits. A stance-phase pitch law and a stride-level regulator stabilize all computed gaits, also with bounded hip torque and friction. Under CPP, any radial force law in virtual-leg coordinates can be embedded independently of posture. For a linear radial template, the stance radius and the constant-momentum sweep have exact closed forms. With a new gravity correction, the resulting analytic return map, to our knowledge the first for a trunk model, predicts liftoff velocity and apex position with mean errors of 1.6% and 0.9%. The natural gaits of the embedded runner are symmetric and need no force step at touchdown. A near-reversibility argument explains their unit multiplier, and a scalar equation predicts them within 0.8%. A deadbeat stride controller based on the analytic map tracks changes of speed, height and posture. CPP thus makes trunk models accessible to the analytic tools developed for SLIP.

0.29

Gait-Dependent Effects on Quadruped Locomotion for Load-Carrying using Passive Mechanism

cs.RO ·2026-09-10 ·Giovanni B. Dessy, Claudio Semini, Victor Barasuol
similarity 0.65
Abstract

Passive mechanical interfaces offer a lightweight alternative to actuated manipulators for quadruped payload carrying, but their impedance directly couples the payload dynamics with the locomotion pattern. This paper analyzes how passive-arm stiffness-damping selection affects payload-carrying locomotion under different gait and payload conditions. We compare damped and underdamped passive-arm impedance configurations in simulation during flat-ground locomotion. For crawl gaits, where the support polygon remains well defined, the results show that underdamped impedance increases passive-joint oscillations and can reduce the ZMP margin with respect to the support polygon. Trot is retained as a dynamic excitation case for the passive arm, but it is not used for direct ZMP-margin stability comparison. The results are summarized in gait-payload-stiffness-damping maps, where ZMP-margin reduction is evaluated for crawl gaits and trot is retained only as a passive-arm excitation case.

0.44

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.65
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.63
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

Walking on the Slope: Stable Bipedal Gaits with Genetic-Algorithm-Optimized Trajectories

cs.RO ·2026-09-17 ·Madhav Rijal
similarity 0.61
Abstract

This paper presents the kinematic and dynamic modeling, trajectory generation, and stability analysis of an 8-degree-of-freedom (DOF) biped robot walking on flat and inclined terrain. Denavit-Hartenberg (DH) parameters and homogeneous transformations are used to derive the forward kinematics, while closed-form inverse kinematics maps the desired hip and swing-foot Cartesian trajectories, generated with cubic splines, to joint angles. Joint torques are computed using the Newton-Euler iterative algorithm, and dynamic stability is evaluated using the zero moment point (ZMP) criterion. A genetic algorithm (GA) optimizes the hip height, maximum swing-foot lift, and frontal-plane tilt angle by minimizing the work done by the joints subject to a ZMP feasibility penalty. Simulation results in MATLAB show that the nominal 8-DOF model remains ZMP-stable for step completion times down to 0.5 s and for slope inclinations up to 22.5 degrees with the given foot geometry. Beyond these limits, the ZMP leaves the support polygon, and either the foot dimensions or the trajectory parameters must be modified. The results also show that ZMP stability is governed by the mass distribution among the links rather than the total mass of the robot.

0.20

Design and Analysis of a Nonlinear Parallel Mechanism Coupling for Dynamic Humanoid Legs

cs.RO ·2026-10-12 ·Rohit Kumar, Heiner Peters, Felix Wiebe, Franek Stark, Janne Janzen +3 more
similarity 0.61
Abstract

Humanoids increasingly demand lightweight leg mechanisms for agile, dynamic, and energy-efficient locomotion. Reducing distal inertia through proximal actuation has thus become a common design goal. Yet, compact transmissions that preserve torque capability and efficient force transmission remain hard to achieve. This paper presents a novel series-parallel leg design combining a knee parallel mechanism, an ankle parallel mechanism, and a nonlinear knee-ankle coupling where all actuators placed closer to the hip. As the knee flexes, the coupling passively assists ankle dorsiflexion for foot clearance and, as it extends it assists plantarflexion for push-off, redistributing ankle load through the knee transmission. We derive the coupling's nonlinear transmission models and validate them in simulation and on hardware. The design shows that the shared transmission lets both joints draw on each other's actuator capacity by easing the knee's peak torque demand under load and the ankle's peak speed demand during fast motion. With the leg's proximal actuator placement, the leg achieves an effective reflected mass of 0.37 kg at the foot for a 6 kg leg, demonstrating very low distal leg inertia for dynamic humanoid robots.

0.12

Around the World: Unified Learned Locomotion on a 270 g Continuous-Rotation Quadruped

cs.RO ·2026-10-02 ·Arturo Flores Alvarez, Nathan Lintu, Dennis Hong
similarity 0.60
Abstract · 13 pages, including appendices. Project website: https://submissionreview.github.io/around-the-world/

Closed-loop learned locomotion is established on commercial quadrupeds but remains uncommon at the sub-kilogram scale. Continuous-rotation legs give MiNI-Q, a 270 g quadruped, access to supporting configurations on either side of the body. We exploit this range with a single posture-conditioned reinforcement-learning policy that runs entirely onboard. A continuous joint-space reference on the torus $T^8$ and its gravity-conditioned transformation connect upright walking, inverted walking, and landing recovery without state machines or phase switching. Coordinated posture and release curricula train this behavior family; identified actuation, cross-engine validation, and embedded execution support hardware transfer. The same sub-100k-parameter network tracks forward velocity with RMSE of 0.037 m/s upright and 0.050 m/s inverted, resumes walking in 24 of 30 release trials, and operates with four interchangeable foot geometries across four indoor surfaces. Hardware experiments and simulation ablations connect these capabilities to the representation, conditioning, and training choices that exploit the platform's motion range. Demonstration videos and supplementary material are available on the project website: https://submissionreview.github.io/around-the-world/.

0.33