CS Paper Radar

OmniFish: A Bioinspired, Modular, Reconfigurable Soft Robotic Fish Enabling Multi-Modal Swimming

Mathias Jensen, Saravana Prashanth Murali Babu

cs.RO physics.flu-dyn ·submitted 2026-11-18 14:34 UTC · v1

Abstract

In this work, we introduce OmniFish, a bioinspired modular soft robotic fish designed to emulate the full spectrum of body and/or caudal fin (BCF) locomotion modes within a single robotic platform. The design combines morphology averaging across representative fish species with a tendon-driven compliant segmented spine whose effective stiffness can be reconfigured through progressive mechanical jamming. By selectively constraining body segments, OmniFish shifts deformation from whole-body undulation to posterior body bending and localized tail oscillation, enabling bioinspired Anguilliform, Subcarangiform, Carangiform, Thunniform, and Ostraciiform swimming using a single tendon-driven actuator. The design was guided by morphometric analysis and evaluated through caudal-fin thrust characterization, numerical body-drag simulations, kinematic analysis, and swimming performance experiments. Kinematic analysis confirmed the intended robot transition from distributed body undulation to localized tail oscillation. Swimming experiments demonstrated distinct mode-dependent performance, with the Ostraciiform configuration achieving the highest straight-line velocity of 8.14 cm/s and the lowest cost of transport of 2.42 at 1.5 tail beats/s. These proof-of-concept results show that a mechanically simple stiffness-reconfigurable architecture can generate distinct BCF swimming modes and provide a versatile strategy for developing multimodal soft robotic fish.

Comment
Under review at Bioinspiration & Biomimetics. 10 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling and Control of an Eel-Inspired Soft Robot for Design Optimization

cs.RO ·2026-08-14 ·Zhangjingyi Jiang, Mark Campbell
published similarity 0.68
Abstract

Anguilliform locomotion is a highly efficient swimming mode; the advent of new materials for soft robots enables the development of an eel-inspired soft robot. This paper presents a simulation model of an eel-inspired soft robot designed for anguilliform swimming. This model can aid in design optimization and the development of model-based estimation, reasoning, and control systems. A Finite Element Method (FEM) model of an elastic rod is used to capture the soft materials of the robotic fish, which makes it particularly amenable to variation over time as the material properties change. The material model is coupled with a hydrodynamic force model to simulate the behavior of a soft, elongated robot in water. The model is used to demonstrate the effectiveness of the proposed control approaches in achieving desired swimming behaviors. It also provides insights into design decisions, including the robustness of different system configurations and the impact of material degradation and failure. The results show that slightly asymmetric designs are advantageous, offering comparable swimming velocities but greater maneuverability. This model can be used to guide future robotic design decisions aimed at optimizing performance for specific tasks.

0.56

A Tendon-Driven Robotic Jellyfish with Constrained Soft Actuation and Depth Control via Reinforcement Learning

cs.RO ·2026-09-24 ·Jiarui Peng, Yutong Wu, Zelong Wang, Ping Deng, Xiaotian Zhang +3 more
similarity 0.68
Abstract · 8 pages, 8 figures. Corrected a typo in an author name in the arXiv metadata. No changes to the manuscript

Jellyfish-inspired robots offer a compliant and efficient approach to underwater locomotion, but achieving large deformation together with repeatable actuation and closed-loop control remains challenging. In this work, we present a tendon-driven robotic jellyfish with constrained soft actuation. Each actuator combines a flexible substrate with discrete constraints, enabling bending up to \(150^\circ\) with an approximately linear tendon displacement-bending relationship. Eight actuators driven by four servos allow the robot to perform stable swimming, attitude adjustment, and self-righting. Based on the linear actuation, a reinforcement-learning controller is further developed, enabling closed-loop depth regulation in both simulation and physical experiments. These results show that mechanical constraints can improve the controllability of soft actuation while preserving compliant jellyfish-like motion, providing a route toward manoeuvrable and autonomous jellyfish robots.

0.35

Multifunctional Locomotion Control of Multi-Jointed BURs with Swimming and gait Capabilities

cs.RO ·2026-09-29 ·Takumi Asada, Hideo Furuhashi, Kenta Tabata, Renato Miyagusuku, Koichi Ozaki
publishedcode/data similarity 0.66
Abstract · Preprint version of an article published in Advanced Robotics (2026)

Multimodal biomimetic underwater robots (BURs) can conduct underwater tasks suitable for the environment. Combining the characteristics of aquatic organisms enables the swimming and leggedlocomotion required for underwater exploration. Locomotion control mechanism relies on rule-based behavior selection and the designer's discretion. This limits the robot's ability to acquire new behavioral capabilities to the predetermined range of behaviors. To address these challenges, we propose a mechanism and control system that enables the expression of multimodal locomotion capabilities from the same multi-jointed structure. A mechanism equipped with four leg-fins each having four axes is used. This controller achieves nonlinear behavior based on sensor modalities, rather than relying on predefined conditional rule-based on locomotion functions. This system was validated through both physical and simulation testing based on multiple sensor data and behavioral patterns. Utilizing a potential function in multimodal locomotion control was verified to enable transitions between two or three behaviors. Implementing the control method as a multimodal controller is expected to enhance its application in underwater exploration. Our project page is at https://tasada038.github.io/multi-jointed-bur/.

0.41

Water Surface Swimming in a Centipede and its Robophysical Model

cs.RO physics.bio-ph ·2026-09-22 ·Zhaochen J. Xu, Delfin Aydin, Abdullah Mustafa, Margarita B. Levin, Jianfeng Lin +2 more
similarity 0.65
Abstract

Elongate multi-legged robots use coordinated body waves and distributed legs to move through cluttered terrestrial environments. However, as housing actuators for independent leg control can require bulky body segments, their non-streamlined body and limb structure makes it difficult to achieve swimming capability comparable to their terrestrial locomotor performance. At the water surface, we found that the multi-legged robots we tested unexpectedly moved backward: their body waves traveled in the same direction as their displacement, i.e., swimming with a direct wave. We found similar behavior in the centipede \textit{Lithobius forficatus}, which swims with a direct body wave and periodic leg movement. To study how distributed legs contribute to direct-wave swimming, we analyze animal kinematics and develop a multi-legged robophysical model that allows independent variation of leg morphology and stiffness, body-wave direction, and leg coordination. Robophysical experiments show that direct body waves produce consistent forward motion under the tested conditions and that swimming performance depends on body--leg coordination. Additionally, directionally compliant legs increase displacement from approximately 0.08 to 0.21 body lengths per cycle relative to rigid legs under matched anti-phase actuation. These findings clarify how distributed appendages contribute to surface swimming and establish gait and morphology design principles for extending multi-legged field robots from terrestrial locomotion into aquatic environments.

0.24

Adaptive Bendpoint Formation in Octopus-Inspired Soft Continuum Arms

cs.RO ·2026-10-18 ·Jessica Gumowski, Julian Finn, Krishna Manaswi Digumarti, David Howard
similarity 0.64
Abstract

Octopuses exhibit a powerful form of embodied intelligence from a highly adaptable soft body. One key mechanism is the ability to instantiate bending points at any location along the arm, which enables performant and dexterous behaviours. Taking inspiration from the octopus for its dexterity, this study focuses on changing the curvature of a tendon-actuated arm by adaptively changing the anchoring end-point along the arm. An array of inflatable shells is integrated into the arm, where inflating a shell causes an increase in friction at the location, jamming the tendon and creating a temporary new anchoring point. The novel soft actuator does not break the continuity of the arm between the actuated segment and the loose segment. Experiments show that the actuated segment has a non-constant bell-shaped curvature which is comparable to that of a real octopus arm during a reaching motion. Compared to conventional single-tendon continuum manipulators, the proposed design offers an expanded workspace and enhanced dexterity through the ability to independently shape different regions of the arm through selective curvature tuning. At the same time, it avoids the mechanical complexity typically associated with multi-segment, multi-actuator systems.

0.14

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.64
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

All You Need Is Low Fidelity: Zero-Shot Sim-to-Real of Learned Robotic Fish Control

cs.RO ·2026-09-29 ·Liam Maloney, Simon Ramchandani, Mike Y. Michelis, Ronan Hinchet, Robert K. Katzschmann
similarity 0.63
Abstract · 8 pages, 10 figures, submitted to ICRA 2027. Liam Maloney and Simon Ramchandani contributed equally

Complex tasks for underwater robots remain limited by the capabilities of their controllers. Learning a better one for a soft, underactuated robotic fish trades simulator cost against fidelity. We show that an intentionally low-fidelity simulator is enough: a stateless, quasi-steady fluid model with no wake and no added-mass history suffices to learn a \emph{general}, closed-loop controller that transfers to hardware without tuning. Our platform is a soft, single-motor, tendon-driven fish whose policy observes only what the hardware can measure. A staged pipeline grounds the simulator in two independent identifications, fixing the tail dynamics and a stateless fluid model; the policy then acts through a band-limited rhythmic trajectory generator rather than commanding the tail directly. Deployed unchanged in an outdoor pool, a single policy performs closed-loop target reaching, disturbance rejection, and out-of-distribution target acquisition and tracking. The transfer rests on the constraint rather than the fidelity: the generator cannot leave the band over which the fluid was identified. This raises the question of how much of the physics can reside in the controller rather than in the simulator.

0.25

Video2SwimFish: An Automated Pipeline for Reconstructing Controllable Fish Models and Biological Locomotion from Real Fish Videos

cs.RO ·2026-09-30 ·Hangong Chen, Linfeng Cheng, Tahsin Zaman Jilan, Ian Fuller, Lee Caesar +2 more
benchmark similarity 0.60
Abstract

We present Video2SwimFish, an automated pipeline and benchmark for building controllable fish assets from real-fish videos for underwater embodied AI. Given synchronized multi-view videos of an individual fish, the pipeline reconstructs a metrically scaled deformable mesh from a VLM-selected canonical frame, generates internal articulation adapted to that individual's morphology through a VLM actor-critic loop, and extracts a Biological Locomotion Manifold (BLM) from the fish's observed midline curvature. The BLM provides a low-dimensional action space bounded by real-fish motion, enabling an individual swimming policy to be learned for each reconstructed fish. We release two paired datasets: synchronized top- and front-view recordings of 120 individual fish across 6 species, and the controllable assets and individual swimming policies derived from them. Because every asset is tied to the animal it came from, the dataset supports a benchmark that evaluates locomotion learning not only on task success but on fidelity to that individual in trajectory shape, body curvature, and tail-beat frequency, across trajectory following, reward-free swimming behavior transfer from video, and a downstream case study in which a simulated BlueROV underwater robot captures one of the assets. We find that task success and locomotion fidelity do not necessarily improve together: the method achieving the highest task completion is not the method achieving the highest locomotion fidelity, and we identify faithful reproduction of individual animal locomotion as an open challenge for the community. Project website: https://hangongchen.github.io/video2swimfish-web/.

0.33