CS Paper Radar

MarineCraft: Enabling Rapid Prototyping of Underwater Robots via Modular Construction

Yuta Sugiura

cs.RO cs.HC ·submitted 2026-09-18 07:12 UTC · v1

Abstract

Underwater robot development is often hindered by the complexities of waterproofing and wiring, which significantly delay the rapid prototyping process. This paper presents MarineCraft, a modular toolkit designed to accelerate the development cycle through structural reconfiguration. The system features self-contained, waterproof propulsion modules that integrate power, wireless communication, and actuation. By eliminating centralized wiring and the need for repeated sealing, MarineCraft allows diverse robot geometries to be assembled and tested in minutes rather than days. Experimental results demonstrate that this reconfigurable architecture enables fast, iterative design cycles while maintaining reliable operation and leak-free performance at depths of up to 2.5 meters. Our toolkit effectively lowers the barrier to underwater robotics by transforming modularity into a vehicle for rapid physical prototyping.

Closest papers

Nearest neighbours by meaning across the whole index.

Advancing Accessible Underwater Robotics: The Mini-Girona I-AUV at RAMI 2025

cs.RO ·2026-09-02 ·Taqi Hamoda, Bilal Ahmed, Deborah Ele-Ojo, Thi Tran Ha Bao, Adel Saidani +7 more
published similarity 0.63
Abstract

The Mini-Girona Intervention Autonomous Underwater Vehicle (I-AUV) represents an advancement in accessible underwater robotics, designed to bridge the gap between costly, specialized research AUVs and basic Remotely Operated Vehicles (ROVs). Developed with a focus on affordability and usability, the Mini-Girona, priced at approximately $50,000, integrates advanced components such as a 5-DOF manipulator arm, stereo vision, and AI-driven processing for autonomous navigation and intervention tasks. This paper presents the design and development of the Mini-Girona, detailing its performance during the RAMI 2025 student competition. Despite challenges such as thermal management issues and restricted team access, the Mini-Girona achieved second place overall, excelling in vision-based perception and intervention tasks. This work highlights the platform's potential as a tool for underwater robotics research and education, fostering innovation in real-world underwater applications.

0.38

An Autonomous, 3D Printed, Waterjet-Powered, Open-Source Robotic Trimaran for Environmental Inspection and Monitoring

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Martin Lambrechtse-Reid, Minas Liarokapis
published similarity 0.59
Abstract · 8 pages. Accepted version. Published in the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Finalist for th…

Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, hard to reach, or access protected water bodies. This paper introduces such a platform in the form of an autonomous, cost-effective, waterjet-powered robotic trimaran. Motivated by the need for an efficient aquatic monitoring, particularly in Aotearoa - New Zealand's diverse environments, the trimaran provides an efficient, low-cost, and easy to replicate alternative to resource-intensive research vessels. The proposed platform, costs $600-1,500 USD to develop (depending on the sensing system configuration), weighs under 5 kg, and excels in bathymetry and water quality testing. The trimaran can reach speeds of up to 2 m/s offering obstacle avoidance of natural features, such as rocks. Utilizing off-the-shelf components and 3D printing technology, the proposed platform offers excellent reproducibility and robustness while operating in shallow waters with its jet propulsion system. The paper presents in detail the design characteristics, the sensing system employed, testing results focusing on bathymetry, and highlights the ability of vessel and the potential for future research and data collection.

0.58

Swim-and-Breach at Palm Scale: A Rudder-Steered Two-Propeller Underwater Robot Platform with Differential-Thrust Pitch Control

cs.RO physics.flu-dyn ·2026-09-15 ·Daehyun Choi, Ian Bergerson, Hengjia Zhu, Tianjun Lan, Saad Bhamla
similarity 0.59
Abstract

We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.

0.27

Robot-Assisted Deployment and Maintenance of Inflatable Modules for Lunar Habitation: A Field Demonstration

cs.RO ·2026-09-28 ·Kentaro Uno, Shamistan Karimov, Ashutosh Mishra, Elian Neppel, Hazal Gozbasi +3 more
published similarity 0.57
Abstract · Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

Long-term human habitation and in-situ development on the Moon open a new era of space utilization. In this context, robots are a key technology for facilitating the construction of future human outposts. Toward the deployment and establishment of human habitation modules on the lunar surface, we propose a combined system consisting of inflatable modules and a modular, reconfigurable robotic system. This paper presents a report demonstrating various robot-assisted task executions using real hardware, namely the modular and reconfigurable robot MoonBot and the inflatable module HIDAS, to enhance the reliability of their deployment and maintenance. The demonstrated tasks include robotic inspection during inflation, module position alignment, final safety locking, and three-dimensional mapping for post-deployment maintenance. All demonstrations were conducted either in a laboratory environment or at a lunar analogue test site. Finally, lessons learned are discussed to provide essential insights for this robotic application to future lunar habitation.

0.34

Coastal Environment Generation with HoloOcean

cs.RO ·2026-09-09 ·Abigail Austin, Brady Moon, Joshua G. Mangelson
published similarity 0.54
Abstract · Accepted to OCEANS 2026 Monterey

Marine robotic simulation provides a safe and inexpensive method of developing and testing algorithms for unmanned underwater vehicle (UUV) and unmanned surface vessel (USV) autonomy and perception before full field deployment. However, these simulations are often limited by the availability of simulated environments. Current marine robotics simulation suites offer manual ways to edit or create environments, but they require existing data or specialized knowledge of the environment system. To address these issues, we introduce a novel Unreal Engine 5 level generation pipeline that enables automatic creation of coastal environments for HoloOcean. Our pipeline relies on a user-provided overhead image of a coastal scene. The pipeline then uses the image to generate height map data, as well as automatically select assets and place them in the environment.

0.51

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.53
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

FinsSim: A Reality-Aligned Integrated Simulation Platform for Underwater Robot Learning

cs.RO eess.SY ·2026-09-20 ·Yu Zhang, Yuanmingqing Song, Xiangyun Rao, Pangkit Fong, Kunhao Zhang +2 more
similarity 0.53
Abstract · 8 pages, 6 figures

Underwater robot learning relies on simulators that integrate high-fidelity hydrodynamics, convenient learning interfaces, and a credible transition to real scenarios. In this work, we present FinsSim, a reality-aligned integrated simulation platform for Sim-to-Real underwater robot learning. FinsSim first constructs high-fidelity simulation with selectable backends to adapt to diverse requirements. To facilitate underwater robot research, it further offers standard control baselines, alongside with unified robot learning workflows. For reliable Sim-to-Real transfer, FinsSim adopts a multi-sensor fusion scheme to provide low-cost yet precise localization. Moreover, it implements calibrated thruster-hydrodynamics models and a constrained wrench allocation algorithm. Bridging these modules by ROS~2, FinsSim establishes a complete Sim-to-Real transfer pipeline. Through matched simulations and experiments, it is demonstrated that reliable Sim-to-Real transfer of underwater robot control policies can be achieved with the FinsSim framework. Separate ablation studies also validate that the modules of FinsSim can address the pivotal issues of underwater Sim-to-Real from different aspects. Overall, this work aims to bridge the gap between theoretical research and practical applications, ultimately driving advancements in the field of underwater robotics.

0.27

A Layered View of LLM Support in Underwater Robotics

cs.RO eess.SY ·2026-11-04 ·Federico Celi, Leonardo Zacchini, Gabriele Ferri
position similarity 0.53
Abstract · Presented at the I-RIM 3D 2026 - Workshop n.30 How would you like intelligence in your robots? Interdisciplinary perspectives on intelligent…

This extended abstract discusses a specific and, in our experience, practically relevant role for large language models (LLMs) in underwater robotics. Our main premise is that, in underwater fielding missions, the immediate difficulty is often not the synthesis of new low-level control laws, but the operation of complex robotic systems under limited communications, partial observability, and expensive field time. In particular, a significant fraction of the effort during sea trials is devoted to fault diagnosis, telemetry interpretation, mission adjustment, and coordination across heterogeneous assets and operators. We argue that LLMs may be useful at this higher operational level, especially when grounded in structured vehicle state, alarms, logs, mission context, and existing planning or validation tools. At the same time, current limitations in grounding, consistency, and causal reasoning make these systems lack the predictability required to guarantee direct control, especially in real-world critical applications, although we do not exclude a future evolution in this direction. This viewpoint suggests a layered architecture in which conventional autonomy remains responsible for control, perception, estimation, and validated mission execution, whereas LLM-based modules serve as an additional support layer for debugging, operator interaction, constrained replanning support, orchestration, and post-mission analysis.

0.12