CS Paper Radar

Robot-Assisted Deployment and Maintenance of Inflatable Modules for Lunar Habitation: A Field Demonstration

Kentaro Uno, Shamistan Karimov, Ashutosh Mishra, Elian Neppel, Hazal Gozbasi, Shreya Santra, Shinichi Kimura, Kazuya Yoshida

cs.RO ·submitted 2026-09-28 07:46 UTC · v1
published

Abstract

Long-term human habitation and in-situ development on the Moon open a new era of space utilization. In this context, robots are a key technology for facilitating the construction of future human outposts. Toward the deployment and establishment of human habitation modules on the lunar surface, we propose a combined system consisting of inflatable modules and a modular, reconfigurable robotic system. This paper presents a report demonstrating various robot-assisted task executions using real hardware, namely the modular and reconfigurable robot MoonBot and the inflatable module HIDAS, to enhance the reliability of their deployment and maintenance. The demonstrated tasks include robotic inspection during inflation, module position alignment, final safety locking, and three-dimensional mapping for post-deployment maintenance. All demonstrations were conducted either in a laboratory environment or at a lunar analogue test site. Finally, lessons learned are discussed to provide essential insights for this robotic application to future lunar habitation.

Comment
Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

Closest papers

Nearest neighbours by meaning across the whole index.

Toward Lunar Legged Robots: Field Deployment Lessons at LUNA

cs.RO ·2026-10-08 ·Adrian Fuhrer, Joseph Church, Oliver Fischer, William Talbot, Nicolas Faesch +4 more
similarity 0.63
Abstract · Proceeding to the IEEE iSparo Conference 2026

Legged robots are promising candidates for future lunar surface missions because they can traverse steep, loose, and obstacle-rich terrain that challenges conventional wheeled rovers. However, readiness for lunar deployment is limited by uncertainties in foot-regolith interaction, dust generation, illumination-driven perception degradation, and operational constraints. This paper reports lessons from the 2025 LUNA analogue campaign, where ANYmal-D and Magnecko traversed loose regolith simulant and crater-like terrain and collected long-horizon navigation and visual-inertial data under challenging lighting. We show that quadrupedal robots can traverse regolith simulant, but performance is affected by sinkage and slip, dust-generating contacts, and perception failures caused by overexposure, shadows, and low-texture regions. These results motivate tighter integration of regolith-aware locomotion policies, illumination-robust perception, repeatable analogue testing, and mission-level operational validation for future lunar legged robots.

0.22

Fly, Drive, Reconfigure: A Modular Reconfigurable Aerial-Ground Platform for Field Operations

cs.RO eess.SY ·2026-09-24 ·Li-Yu Lo, Yanbaihui Liu, Chengchuan Shu, Tyler Harris, Jonathan Ryan +1 more
similarity 0.57
Abstract

Heterogeneous robot teams distribute complementary capabilities across specialized agents, but their physical roles and capacities typically remain fixed throughout a mission. We present HARP, a Heterogeneous Aerial Robotic modules Platform in which independently deployable aerial robots physically reconfigure to compose their capabilities for field operations. HARP comprises sensor-equipped scouts, flydrive rover modules, and task-specific payload modules. Scouts map the environment and inform an energy-aware planner that jointly selects routes and air-ground mobility modes. Rover and payload modules fly independently across terrain that constrains ground travel, then autonomously assemble into a cooperative ground vehicle for energy-efficient payload transport. Motivated by environmental sampling in remote and difficult-to-traverse regions, we evaluate HARP through field experiments spanning sensing, planning, reconfiguration, airground mobility, payload transport, and task execution. We further conduct module-level deployment tests on the Greenland Ice Sheet toward future autonomous missions. HARP demonstrates how heterogeneous robot teams can adapt not only their actions, but also how their physical capabilities are composed during a mission.

0.15

MarineCraft: Enabling Rapid Prototyping of Underwater Robots via Modular Construction

cs.RO cs.HC ·2026-09-18 ·Yuta Sugiura
similarity 0.57
Abstract

Underwater robot development is often hindered by the complexities of waterproofing and wiring, which significantly delay the rapid prototyping process. This paper presents MarineCraft, a modular toolkit designed to accelerate the development cycle through structural reconfiguration. The system features self-contained, waterproof propulsion modules that integrate power, wireless communication, and actuation. By eliminating centralized wiring and the need for repeated sealing, MarineCraft allows diverse robot geometries to be assembled and tested in minutes rather than days. Experimental results demonstrate that this reconfigurable architecture enables fast, iterative design cycles while maintaining reliable operation and leak-free performance at depths of up to 2.5 meters. Our toolkit effectively lowers the barrier to underwater robotics by transforming modularity into a vehicle for rapid physical prototyping.

0.20

Learning Safety-Constrained Whole-Body Loco-Manipulation for Lunar Surface Operations

cs.RO ·2026-10-11 ·Alvaro Belmonte-Baeza, Miguel Cazorla, Gabriel J. García, Carlos J. Pérez-Del-Pulgar, Jorge Pomares
similarity 0.56
Abstract · 22 pages. Currently under review in a Elsevier scientific journal

Robotic systems for lunar surface operations must act autonomously and preserve their own integrity in an environment where failures are unrecoverable and continuous supervision is impossible. This paper presents a Constrained Reinforcement Learning framework for quadrupedal mobile manipulators that learns a single whole-body policy for tracking a 6D end-effector pose specified in task space, with operational limits enforced during learning through a constrained learning mechanism. We introduce a reward formulation in which the transition between locomotion and manipulation emerges from the reward geometry rather than from an explicit gating mechanism, a stability term derived from the Gravito-Inertial Inclination Margin and motivated by the reduced-gravity dynamics of the lunar surface, and a design rule for reward regularization that follows from the multiplicative structure of the termination-based objective. The framework is evaluated in a lunar-analog simulation spanning three terrain morphologies at five difficulty levels under lunar gravity, with regolith contact properties calibrated to the JSC-1a simulant and varied from loose to dense. The learned policy attains mean position and orientation errors of 3.22 cm and 6.83 deg. under nominal conditions, retains this precision across regolith densities and over the operationally representative range of terrain difficulty, and reduces soft-constraint violation time by up to an order of magnitude relative to an unconstrained baseline while incurring no hard-constraint violations.

0.50

Robotic Budding: From Homogeneous Cells to Diverse Morphologies in Physical Self-Reproduction

cs.RO ·2026-10-22 ·Siyuan Zhang, Junyan Liu, Wanglin He, Hod Lipson
similarity 0.55
Abstract

Physical self-reproduction in modular robots remains difficult because a robot must not only move, but also collect, align, dock, and separate modules reliably in hardware. Taking inspiration from how genetically identical cells form the varied tissues of an organism, we introduce a single standardized robotic module that combines a magnetic docking interface with two actuated joints and folds from a flat, two-dimensional configuration into three-dimensional structures. Modules of this single design can be assembled into two morphologies: a three-module "trilobite" and a five-module "seal". Using a small set of discrete motion commands, a human operator steers an assembled parent robot to dock magnetically with a sequence of spare modules, which are assembled into a second, structurally identical individual that then separates from the parent. Because the parent retains all of its original modules, this is a budding-style form of physical reproduction. Here, we report preliminary hardware demonstrations of this full process on both morphologies. We discuss the current scope of the system, including its present reliance on direct human teleoperation rather than autonomous control, and outline directions toward autonomous execution of this process and repeated validation across a larger number of independent trials.

0.17

SPROUT: The Open-Source Soft Growing Robot for Search and Rescue

cs.RO eess.SY ·2026-09-15 ·Antonio Alvarez Valdivia, Ciera McFarland, Robert Reeve, Ankush Dhawan, Chad Council +3 more
code/data similarity 0.55
Abstract

Soft robotic systems have long been theorized as ideal candidates for use in search and rescue operations; however, there have been significant barriers to entry in graduating soft robotic systems from the laboratory to the field. To address this gap in replicable, reliable soft robot systems, we present the designs for SPROUT, the Soft Pathfinding Robotic Observation Unit. The system has matured over years of interaction with professional urban search and rescue communities, with the goal of operating in dusty, wet, and isolated conditions. This manuscript contains supplementary material, including code, parts manifests, CAD assemblies, and build instructions to allow the broader robotics research community to build their own SPROUT systems. The modular hardware and ROS 2-based software stack support task-specific payloads and control functions, allowing SPROUT to be adapted for applications beyond search and rescue, including infrastructure inspection and archaeology. Here, we demonstrate SPROUT performing a variety of challenging inspection and traversal tasks in collapsed structure training sites used by first responders. The main project page is available online at https://sprout-mitll.github.io/sprout/.

0.32

MARE: An Open-Source Lunar Rover Simulator with Shadow Ground Truth for Perception and Autonomy

cs.RO ·2026-10-20 ·Raúl Castilla-Arquillo, Miguel Olivares-Mendez
code/data similarity 0.54
Abstract · 10 pages, 16 figures, 3 tables. v2: adds a dataset with segmentation and depth baselines. Code: https://github.com/raulcastar/MARE-Lunar-Sim…

Lunar surface exploration increasingly relies on autonomous rovers that must perceive and traverse unstructured terrain under extreme illumination conditions. Near the lunar poles, low sun elevations produce long, high-contrast shadows that challenge stereo vision, terrain segmentation, and localization. Developing perception and navigation algorithms for these conditions requires large amounts of sensor data with accurate ground truth, which field campaigns and analog facilities can only provide at high cost and with limited variety. This paper presents MARE (Modular Autonomy and Rendering Environment), an open-source simulation suite for lunar rover perception and autonomy built on Unreal Engine 5 and ROS 2. MARE consists of three integrated components. Terrain Studio generates cratered and rocky lunar Digital Elevation Maps (DEMs) to build simulation scenes. A dedicated Unreal Engine project hosts two physics-based rovers with plugins for stereo, lidar, event, and Single-Photon Avalanche Diode (SPAD) cameras, streaming time-stamped sensor data and pixel-accurate ground truth. Lastly, a Guidance, Navigation, and Control (GNC) stack provides web-based mission control. Validation shows a mean Intersection over Union (IoU) of 0.79 between predicted and rendered shadows at low sun elevations, and stereo depth analysis verifies decreased pixel coverage in shadowed regions relative to sunlit terrain.

0.28

Mining beyond Earth with Space Robots: Exploration, Sampling, and Extraction

cs.RO ·2026-08-21 ·Dong Li, Dujun Nie, Xiaotong Zhang, Ruilin Wang, Yuchen Li +9 more
surveycode/data similarity 0.53
Abstract

Space resource acquisition and utilization, commonly referred to as Space Mining, represent critical pathways for enabling sustained human exploration and unlocking commercial opportunities in space. These resources mainly include helium-3, water, mineral resources on the Moon and Mars, and abundant mineral deposits on asteroids. Due to the harsh conditions of space, communication delays, and high launch costs, the development of autonomous robotic systems is critical to achieving efficient, cost-effective space mining. This paper provides a comprehensive overview of space mining robotics and associated technologies. First, we review the background of space mining, including international policies, commercial entities, and recent advancements. We define a systematic six-stage architecture for space mining: Exploration is initiated by (1) remote sensing for target identification and (2) precise in situ robotic detection; Sampling progresses from (3) single-robot small-scale sampling to (4) multi-robot large-scale excavation; and Extraction integrates (5) autonomous resource extraction and (6) final integration into in situ construction or terrestrial transport. Additionally, we review and curate existing resources for space mining research, including real-world mission data, terrestrial analog datasets, and high-fidelity simulation environments. Finally, we identify critical open challenges in autonomous space mining and delineate a strategic research roadmap to bridge current technological gaps, fostering the transition toward a sustainable off-world economy. To track ongoing developments in space mining, we maintain an updated project page: https://github.com/OpenSpace-Lab/Space-Mining-with-Robotics-List.

0.54