CS Paper Radar

Robotic Budding: From Homogeneous Cells to Diverse Morphologies in Physical Self-Reproduction

Siyuan Zhang, Junyan Liu, Wanglin He, Hod Lipson

cs.RO ·submitted 2026-10-22 21:18 UTC · v1

Abstract

Physical self-reproduction in modular robots remains difficult because a robot must not only move, but also collect, align, dock, and separate modules reliably in hardware. Taking inspiration from how genetically identical cells form the varied tissues of an organism, we introduce a single standardized robotic module that combines a magnetic docking interface with two actuated joints and folds from a flat, two-dimensional configuration into three-dimensional structures. Modules of this single design can be assembled into two morphologies: a three-module "trilobite" and a five-module "seal". Using a small set of discrete motion commands, a human operator steers an assembled parent robot to dock magnetically with a sequence of spare modules, which are assembled into a second, structurally identical individual that then separates from the parent. Because the parent retains all of its original modules, this is a budding-style form of physical reproduction. Here, we report preliminary hardware demonstrations of this full process on both morphologies. We discuss the current scope of the system, including its present reliance on direct human teleoperation rather than autonomous control, and outline directions toward autonomous execution of this process and repeated validation across a larger number of independent trials.

Closest papers

Nearest neighbours by meaning across the whole index.

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.67
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.33

Contact-Stable Deformable Tissue Simulation Using Implicit Integration and Live-Pose Grasp Constraints for Laparoscopic Surgery Robot Policy Evaluation

cs.RO ·2026-09-22 ·Juahn Oh, Dongho Yee, Jinseok Lee, Jiyul Lee, Yechan Seo +7 more
hot direction similarity 0.62
Abstract · Submitted to IEEE ICRA 2027

Closed-loop evaluation of surgical robots requires tissue that deforms, can be grasped and lifted, and reproduces the anatomy in which the robot will operate. We present a simulator in which this tissue is reconstructed from a fixed-view RGB-D recording of the surgical field, composited to remove the instruments, closed into watertight volumes and tetrahedralised; the pipeline was applied unchanged to three specimens of two species (thirteen organs, 146,061 tetrahedra, no inverted elements). For one specimen, the organs are placed in a bimanual cell in which two Franka FR3 arms operate motorised instruments through 6 mm trocars. The core contribution is the numerical and contact design that keeps this cell stable: implicit integration, simulation meshes separate from collision meshes, numerical guards, and a grasp constraint captured at the live tissue pose. In 45 repeated grasp-lifts, a friction grasp held the tissue in 0 of 15 trials and each constraint grasp in 13 of 15; on displaced tissue, a rest-pose constraint produced one-step snaps of up to 17.8 mm, which live-pose capture eliminates. Against the recording, front-surface depth error is 1.33 to 1.41 mm, organ silhouette IoU is 0.80, and in five grasp-lifts reproduced from video the landmark displacement RMSE is 11.8 mm against 14.2 mm for a static prediction. Biofidelity is not claimed; the environment is intended for closed-loop feasibility, safety, contact and policy screening.

0.32

Making Waves: A Membrane-Coupled Delta Array for Manipulating Objects Below the Actuator Spacing

cs.RO ·2026-09-30 ·Bailey Dacre, Andrés Faíña, Oliver Kroemer, Zeynep Temel
theory similarity 0.58
Abstract

Distributed manipulator systems manipulate objects through the coordinated motion of many actuators. However, an object must be supported by several actuators at once, so the centre-to-centre actuator spacing imposes a hard lower bound on manipulable object size. We remove this bound by coupling the end-effectors of an 8 x 8 array of three degrees-of-freedom delta robots with a stretchable fabric, turning 64 discrete contacts into a continuous surface capable of manipulating objects smaller than the actuator spacing. Viewing the array as a displacement field over that surface, we investigate local quasi-static and cyclic fields as manipulation primitives. These primitives can be applied globally across the array or locally confined around each tracked object to independently manipulate several objects in parallel. We then train a policy acting on low-order discrete cosine transform coefficients: at equal action dimension, commanding a nineteen-delta neighbourhood halves the placement error of commanding the whole array. The policy transfers to hardware without adaptation at 76% success. The platform manipulates objects from 15mm-90mm, a six-fold range spanning both sides of the actuator spacing, 43.3mm, on a single surface.

0.21

GOLEM: Modular Humanoid Autonomy Towards Electric Vehicle Battery Disassembly

cs.RO ·2026-08-21 ·Max Conway, William Xie, Allen Devaraj, Yutong Zhang, Niraj Pudasaini +12 more
code/data similarity 0.57
Abstract

Disassembling end-of-life electric vehicle (EV) battery packs is dull and dangerous work, performed almost entirely by humans. We present GOLEM (Generalized Open Library of Embodied Modules), an end-to-end, open-source system architecture for EV battery disassembly with the Unitree H1-2 humanoid robot in which walking, manipulation, dynamic stability, navigation, and spatial memory are independent modules with abstract interfaces, so that methods are easily developed, interchanged, and compared. GOLEM is deployed as a Docker-based ROS 2 abstraction in which MuJoCo and IsaacLab digital twins expose interfaces matching the physical robot. GOLEM's composability and per-module customization enable development and demonstration of humanoid EV battery disassembly, from simulation to reality. GOLEM provides fair comparison between humanoid modules, enabling evaluation as a capability ladder, in which one module is characterized at a time and added as a rung: LiDAR-inertial navigation places the robot within 13.0cm of a 6m goal; a learned standing controller recovers from external disturbances that sampling-based lower-body MPC does not; and grasping loosened fasteners from a real Hyundai Ioniq 5 pack degrades from 97% tethered to 87% free-standing to 37% under navigation-induced pose variance. Source code is available at the project page https://golem-humanoid.github.io

0.39

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.56
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

SwapBot: Tool-Centric Robot Manipulation via Interchangeable End-Effectors and Tactile Sensing

cs.RO ·2026-10-29 ·Yunchu Zhang, Ray Song, Junhan Jiao, Liyiming Ke, Yuchen Yang +4 more
similarity 0.55
Abstract

Robot manipulation in everyday environments inherently involves substantial tool usage. Seemingly simple household tasks, such as cooking pan-fried tofu, require forceful cutting, delicate brushing, and precise placement using different tools under contact-rich interaction. Thus, the ability to autonomously swap and use task-appropriate tools is important for tool-centric manipulation. We introduce SwapBot, a modular, tool-centric end effector system featuring low-cost adapters that quickly convert common household tools into robot end effectors. Rather than pursuing a single universal gripper, SwapBot adopts a unified design principle that combines a fixed robot-side coupling interface with low-cost, tool-side adapters, enabling compatibility with diverse tools, including articulated ones, and multiple robot platforms. Each adapter integrates compact tactile sensors, supports fast autonomous swapping, and interfaces with an intuitive teleoperation system for efficient demonstration collection. User studies show that, during teleoperation, SwapBot reduces task completion time and operator workload. Using collected demonstrations on the robot, we train imitation learning policies to successfully perform tool-centric tasks like cooking tofu, stirring salad, flipping meat. Our ablation study shows that using tactile-augmented demonstrations improves policy performance across contact-rich skills, increasing success rates by 15 to 25 percentage points over RGB-only policies. These results highlight modular, tactile-equipped tools as a practical and extensible pathway toward robust and capable robot manipulation. Project website https://personalrobotics.github.io/SwapBot.

0.29

Robot-Assisted Deployment and Maintenance of Inflatable Modules for Lunar Habitation: A Field Demonstration

cs.RO ·2026-09-28 ·Kentaro Uno, Shamistan Karimov, Ashutosh Mishra, Elian Neppel, Hazal Gozbasi +3 more
published similarity 0.55
Abstract · Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

Long-term human habitation and in-situ development on the Moon open a new era of space utilization. In this context, robots are a key technology for facilitating the construction of future human outposts. Toward the deployment and establishment of human habitation modules on the lunar surface, we propose a combined system consisting of inflatable modules and a modular, reconfigurable robotic system. This paper presents a report demonstrating various robot-assisted task executions using real hardware, namely the modular and reconfigurable robot MoonBot and the inflatable module HIDAS, to enhance the reliability of their deployment and maintenance. The demonstrated tasks include robotic inspection during inflation, module position alignment, final safety locking, and three-dimensional mapping for post-deployment maintenance. All demonstrations were conducted either in a laboratory environment or at a lunar analogue test site. Finally, lessons learned are discussed to provide essential insights for this robotic application to future lunar habitation.

0.34

Make it Walk: Computational Design of LEGO Walkers

cs.RO ·2026-10-21 ·Siqi Li, Fancheng Gao, Chi-Wing Fu, Peng Song
similarity 0.55
Abstract

LEGO walkers are walking automata constructed from modular LEGO Technic bricks. They exhibit intriguing locomotion and are also highly reconfigurable through the modular Technic bricks, making them widely applicable in education, recreation, and robotics research. However, existing LEGO walkers are designed mostly by reusing existing single-actuator walking mechanisms. Although the locomotion is stable, their fixed walking gaits limit their adaptability and versatility. This paper presents the first computational solution capable of designing LEGO walkers that not only walk stably, but also support a variety of walking gaits. Our idea is twofold. First, we control the foot motion trajectory of each leg mechanically via a specifically-designed gear-linkage mechanism, in which we incorporate a pair of 3D-printed non-circular gears to work with a LEGO Technic mechanism. Second, we drive each leg by an independent motor and synchronize the timings of multiple leg motions via a simple yet adaptable control algorithm, enabling stable and versatile locomotion. Importantly, we take this modeling as a foundation to co-design the morphology and control of the LEGO walkers to meet the target locomotion and appearance. Leveraging our approach, we created a variety of LEGO walkers, demonstrating various walking gaits and appearances, and fabricated some of them to show their locomotion capability in the real world.

0.22