CS Paper Radar

Make it Walk: Computational Design of LEGO Walkers

Siqi Li, Fancheng Gao, Chi-Wing Fu, Peng Song

cs.RO ·submitted 2026-10-21 09:56 UTC · v1

Abstract

LEGO walkers are walking automata constructed from modular LEGO Technic bricks. They exhibit intriguing locomotion and are also highly reconfigurable through the modular Technic bricks, making them widely applicable in education, recreation, and robotics research. However, existing LEGO walkers are designed mostly by reusing existing single-actuator walking mechanisms. Although the locomotion is stable, their fixed walking gaits limit their adaptability and versatility. This paper presents the first computational solution capable of designing LEGO walkers that not only walk stably, but also support a variety of walking gaits. Our idea is twofold. First, we control the foot motion trajectory of each leg mechanically via a specifically-designed gear-linkage mechanism, in which we incorporate a pair of 3D-printed non-circular gears to work with a LEGO Technic mechanism. Second, we drive each leg by an independent motor and synchronize the timings of multiple leg motions via a simple yet adaptable control algorithm, enabling stable and versatile locomotion. Importantly, we take this modeling as a foundation to co-design the morphology and control of the LEGO walkers to meet the target locomotion and appearance. Leveraging our approach, we created a variety of LEGO walkers, demonstrating various walking gaits and appearances, and fabricated some of them to show their locomotion capability in the real world.

Closest papers

Nearest neighbours by meaning across the whole index.

QLAUN: A Research-Oriented, Robust, Agile, Modular, and Affordable Torque-Controlled Quadruped Robot

cs.RO ·2026-09-03 ·Mohamad S. Moudallal, Noel J. Maalouf
published similarity 0.63
Abstract · Extended abstract presented at IEEE ICRA@40, Rotterdam, Netherlands, September 2024. 2 pages, 1 figure

QLAUN Bot (Quad-Legged Adaptive Unmanned Navigator Robot) is a torque-controlled quadruped robot that is research-oriented, cost-effective, and aimed at achieving simultaneous robustness and agility while being completely 3D-printed. It is a quadruped robot that is aimed at empowering robotics research at universities and research institutes in Lebanon and the MENA region. Using a novel electronics-free leg design strategy, we present a modular robot with interchangeable and easily replaceable legs. The 15 kg robot possesses 12 DoF (Degrees-of-Freedom) with three per leg, each paired with a completely 3D-printed Quasi-Direct Drive (QDD) actuator that consists of a brushless DC motor and a low-ratio gearbox transmission that is connected to a belt transmission system for significantly increasing the torque outputs at the joints. We present legs that have decoupled hip and knee actuators to improve the overall modularity of the robot. QLAUN is almost completely 3D-printed using polylactic acid (PLA) and assembled using off-the-shelf parts to create a robust, agile, and affordable robot for legged robot locomotion research. The legs possess joints with wide ranges of motion, including a continuous hip flexion-extension joint. A compliant foot, printed using TPU-95A is also implemented for alleviating hard impacts and handling terrain uncertainties. This extended abstract aims to introduce QLAUN, a novel platform for robotics research, emphasizing the design concepts and principles that underpin its development to the academic and research communities in the field of robotics.

0.34

SHOES: Sim-to-real Hardware-adaptation via On-policy Expansion of Skills for Legged Robots

cs.RO ·2026-10-12 ·Kota Tsuruhara, Tsung-Yuan Chen, Kento Kawaharazuka
published similarity 0.61
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026)

Humans expand their locomotion capability by wearing appropriate footwear, such as hiking boots for mountains or skates for ice. Footwear changes the ground-contact interface and enables traversal of otherwise difficult terrain. In contrast, locomotion controllers are typically trained for a fixed morphology, and their performance can degrade when shoes alter foot geometry, mass, and friction. We propose SHOES, a sample-efficient framework for adapting locomotion policies to footwear-induced morphology changes. SHOES freezes a simulation-trained nominal policy and fine-tunes only lightweight, identity-initialized modulation modules on the robot, preserving the initial behavior while enabling efficient hardware adaptation. We also introduce SafeBox, a workspace-aware waypoint sampler that constrains online adaptation within a user-defined workspace. The simulation results with a shoe-equipped Unitree Go2 show that SHOES substantially recovers locomotion performance after footwear-induced morphology changes using limited additional adaptation. Under the same adaptation budget, SHOES outperforms FiLM-only, Linear Adapter-only, and residual-RL baselines. Real-world experiments on a Unitree Go2 fitted with human shoes further evaluate the effectiveness of SHOES for hardware deployment.

0.21

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.60
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

LACE-CRAFT: Robot Co-Design with Actor Inheritance and Blackboard Collaboration

cs.RO ·2026-10-07 ·Yuhan Wen, Jiawei Wang, Qixuan Zhang, Calvin Zhang, Yusen Qin +1 more
similarity 0.60
Abstract · 16 pages including appendix. Corrected source files to match the author list; scientific content unchanged. Project website: https://deemost…

Robot co-design couples morphology search with policy learning, yet training every new design from scratch discards acquired control experience. We present LACE-CRAFT, which compares continued learning on the current robot with policy adaptation to new morphology-reward pairs. LACE resumes the incumbent's full learning state and initializes compatible challengers with its actor parameters and observation statistics. A fixed task metric selects among both branches and the frozen incumbent. CRAFT coordinates Feedback, Morphology, Reward, and Integration roles through shared experimental records and behavioral replays to generate and cross-review paired proposals. A generative extension converts generated meshes into editable articulated models with configured joints, actuator interfaces, and consistently updated simulation assets. Across five locomotion benchmarks, mean scores over three evaluation seeds are 6.4-91.9% higher than D2C. Both methods train 30 new morphology-reward pairs over five rounds; LACE additionally uses four continuation training units. Five-task ablations examine policy inheritance and replay-derived feedback. A fabricated prototype demonstrates indoor walking and illustrates the geometry-to-hardware workflow.

0.33

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.60
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.44

OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels

cs.RO ·2026-10-28 ·Francesco Iotti, Alok Ranjan, Franco Angelini, Manolo Garabini
publishedhighly cited similarity 0.59
Abstract

Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.

0.64

Multi-Terrain Mastery: A Comprehensive Controller for Bipedal Locomotion

cs.RO ·2026-09-27 ·Oluwami Dosunmu-Ogunbi, Aayushi Shrivastava
similarity 0.59
Abstract

Advancing bipedal robots to navigate diverse terrains remains a significant challenge in robotics. Traditional locomotion controllers excel on specific surfaces but struggle across varied environments, limiting their practical applications. Given the unpredictable nature of real-world environments, a single controller capable of handling multiple terrains is ideal, eliminating the need for multiple specialized controllers. We propose a multi-terrain controller to enhance the versatility and robustness of bipedal locomotion. Building on previous work with a stance ankle motor for stability on inclined and rough surfaces, this paper extends capabilities to steep wet uneven grassy slopes, and compliant terrains such as sand, gravel, rocks, and constrained terrains like staircases. To address the unique demands of these terrains, we introduce a new impact map that is essential for maintaining performance and robustness against unseen terrains. We also discuss in detail the control structure for real-time deployment on the robot. We validate our controller on the 20 degree-of-freedom Cassie bipedal robot.

0.23

ThinkLocoManip: A Whole-Body Control Agentic Harness for Legged Loco-Manipulation

cs.RO ·2026-10-25 ·Nuo Chen, Shizeng Zhang, Yujie Yang, Jinghong Wang, Zhenyang Qu +8 more
similarity 0.59
Abstract

In this paper, we propose ThinkLocoManip, an agentic harness for legged loco-manipulation designed to tackle complex, long-horizon tasks in large-scale environments. Existing approaches typically follow either direct action generation or a plan-then-act paradigm, both of which can struggle with the generalization and error-recovery capabilities required for extended task execution. In contrast, ThinkLocoManip adopts an interleaved reasoning-and-acting paradigm, allowing the agent to continuously reason about its current state, execute actions, observe their outcomes, and adapt its strategy accordingly. Building on this paradigm, our agentic harness orchestrates a suite of specialized tools for perception, navigation, manipulation, and locomotion, enabling flexible composition of heterogeneous capabilities. Unlike existing robotic agentic harnesses, ThinkLocoManip explicitly incorporates locomotion as a tool domain for agent reasoning and execution. We further design a set of skills that explicitly account for both tool usage within each functional domain and coordination across domains, supporting effective execution of complex behaviors over long horizons. To tackle task failure during long-horizon interactions, we develop keyframe thinking mechanism to preserve critical execution context and support efficient error recovery. Extensive real-world experiments demonstrate that ThinkLocoManip substantially outperforms representative methods based on both direct action generation and plan-then-act paradigms across challenging long-horizon legged loco-manipulation tasks. Notably, ThinkLocoManip achieves a success rate of 77%, more than twice that of the strongest plan-then-act baseline (37.1%). Our experiments further validate the effectiveness of interleaved reasoning and acting, tool orchestration, and coordinated skill execution.

0.15