CS Paper Radar

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

Chenbo Xia, Chao Ye

cs.RO ·submitted 2026-09-10 10:40 UTC · v1

Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

Closest papers

Nearest neighbours by meaning across the whole index.

From Legs to Wheels: Embodiment-Aware Human Motion Retargeting for Mobile-Base Humanoids

cs.RO ·2026-10-06 ·Jiyeon Koo, Eunseom Pyo, Jeonghee Seo, Taehwa Kim, Andrew Jaeyong Choi
similarity 0.75
Abstract · 8 pages, 4 figures

Human video offers a scalable source of robot demonstrations, yet most human-to-humanoid retargeting methods assume a legged robot with human-like kinematics. This assumption does not hold for mobile-base humanoids equipped with a wheeled base, vertical lift, and two arms. Human walking must be expressed through base motion, while torso bending may require coordinated lift and arm motion. We address this mismatch with a task-conditioned framework that assigns reconstructed human motion to base, lift, and arm responsibilities before robot-specific realization. The allocator preserves the human-derived path, stabilizes heading, separates turn and translation when needed, retimes commands to satisfy base limits, and repairs lift and arm trajectories. A deployment adapter then converts the reference to 50 Hz commands using stationary-base detection, deadband and slew-rate filtering, time-consistent playback scaling, and separate linear and angular gains. We evaluate the resulting references with human-derived task-space comparisons, policy-free simulation replay, and a qualitative execution on a physical robot.

0.29

BRIDGE: An Open-Source Humanoid Platform via Morphology-Control Co-Design for Physical AI

cs.RO cs.AI ·2026-09-03 ·Jianren Wang, Letian Qian, Zikai Wang, Weiwei Wu, Junjie Zong +2 more
code/data similarity 0.73
Abstract

Developing humanoid robots capable of leveraging human behavioral data is essential for general-purpose embodiment, yet conventional development remains bottlenecked by a decoupled paradigm that isolates hardware design from whole-body control. This approach leads to suboptimal systems that compromise human-like fluidity and agility. To bridge this gap, we introduce a data-driven morphology-control co-design framework that optimizes humanoid morphology for human-like movement. To quantify morphological fidelity, we also introduce a novel metric that jointly considers kinematic retargeting fidelity to human motion and dynamic tracking performance. Our framework achieves state-of-the-art (SOTA) performance across all metrics compared to baseline humanoids (Bumi, K1, and Toddlerbot). Finally, we realize this design in Bridge, an open-source, 88cm-tall humanoid platform released alongside its control policy. We demonstrate that Bridge captures human motion data with superior fidelity, exhibiting exceptional performance across foundational locomotion, robust balance, and highly dynamic maneuvers. Videos and open-source materials: https://sites.google.com/view/bridgerobot.

0.46

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.72
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

Humanoid SRL: Augmenting Humanoids with Supernumerary Limbs for Coordinated Loco-Manipulation

cs.RO ·2026-10-19 ·Fukang Liu, Feiyang Wu, Paul Barsa, Jaehwi Jang, Akshat Jain +10 more
similarity 0.72
Abstract

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to investigate how morphological augmentation reshapes its feasible action space. Through quantitative analysis and hardware experiments across two configurations, we show how the additional limb expands whole-body interaction capabilities by enabling manipulation and support to be coordinated beyond the constraints of the native dual-arm configuration. To control this augmented morphology, we leverage model-based trajectory optimization (TO) to generate dynamically feasible motions for goal-conditioned reinforcement learning (RL) controllers. The controllers are trained in simulation and transferred to hardware in a zero-shot manner, enabling coordinated whole-body skills for contact-rich tri-arm loco-manipulation. We further show vision-guided autonomous execution on selected tasks using diffusion policies trained from hardware demonstrations. Our findings suggest that humanoid morphology need not be restricted to human-like forms, but can be reimagined as an extensible design space for robotic augmentation.

0.17

DexWeave: Learning Dexterous Humanoid Loco-Manipulation from Human Demonstrations

cs.RO ·2026-09-28 ·Naichuan Sun, Haotian Shen, Yizhang Zhang, Luying Feng, Haoze Wang +3 more
code/data similarity 0.72
Abstract · 26 pages, 6 figures

Learning dexterous humanoid loco-manipulation from human demonstrations requires transferring not only human motion, but also the coordinated interaction structure underlying the demonstrated behavior. This is challenging because embodiment differences distort the coupling among body motion, wrist placement, finger articulation, and object interaction, while kinematically accurate references may still be difficult to realize under robot dynamics. We present DexWeave, a unified framework that connects interaction-consistent motion retargeting with anatomy-aware whole-body policy learning. DexWeave first employs a two-stage retargeting procedure that initializes body and hand motions with specialized solvers and subsequently performs coupled refinement over the upper-body interaction chain while preserving lower-body support. The resulting references are tracked by an anatomy-aware Transformer policy that represents anatomical regions as structured tokens and uses directed masked attention to model their dependencies, with object information selectively conditioning the upper-body pathway for dexterous interaction. The policy jointly outputs body and dexterous-hand actions and is trained directly with reinforcement learning, without pretrained tracking policies, teacher-student distillation, or subsequent residual refinement. DexWeave improves retargeting fidelity and interaction consistency while achieving higher manipulation performance and faster policy convergence than MLP baselines. We further deploy the learned policies on a physical Unitree G1 humanoid equipped with Inspire dexterous hands, demonstrating dexterous whole-body loco-manipulation in the real world. See our project page (https://dexweave.github.io) for videos.

0.48

DUET: Decoupled Upper- and Lower-Body Execution for Task-Agnostic Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-09-19 ·Kapalik Khanal, Biswash Khatiwada, Stephen Afrifa, Fan Wu, Ramesh Bahadur Bist
similarity 0.71
Abstract

Changing a humanoid robot's manipulation policy should not require retraining the controller that maintains the robot's balance. This study introduces DUET, a decoupled execution framework that enables locomotion and manipulation controllers to operate simultaneously by combining their commands only at the robot interface. A reinforcement-learning locomotion policy controls the 12 leg joints and a waist yaw joint, tracking planar velocity, turning rate, and pelvis height from deep crouching to upright standing on a 23-degree-of-freedom Unitree G1. The 10 arm joints are excluded from the action space, while their positions and velocities are included only as observations, so that any compatible manipulation policy that generates arm-joint targets can control the upper body, and the locomotion policy keeps the lower body stable without requiring shared training or direct coordination. This study demonstrates the modular approach on hardware by pairing the same locomotion checkpoint with two different vision-language-action models, GR00T N1.7 and pi0.5. In simulation evaluation, the locomotion controller kept the robot's lower body stable with no falls while tracking the commanded planar velocity, yaw rate, and pelvis height with errors of 0.186 m/s, 0.142 rad/s, and 0.016 m, respectively. Ablation studies identify the upper-body pose curriculum as the dominant component, and removing this training step reduces episode survival from 20.0 to 7.4 seconds and increases the fall rate to 6.06 per environment minute. Robustness tests show no falls under pushes of up to 1.0 m/s within the trained payload range, and no falls at twice the payload limit for pushes below 0.7 m/s. These results show that a manipulation policy can be exchanged without retraining, restarting, or otherwise touching the layer that keeps the robot upright.

0.22

Fast Motion Retargeting Pipeline for Scalable Humanoid Robot Learning

cs.RO ·2026-10-20 ·Daniel Marew, Sangjun Park, Nisal Perera, Donghyun Kim
code/data similarity 0.71
Abstract

While large-scale human motion capture datasets provide a rich source of demonstrations for humanoid robot learning, retargeting the diverse motions to different humanoid robots remains a nontrivial challenge. Existing kinodynamic trajectory optimization pipelines are computationally expensive and often require manual adjustments per motion. We present FRDV (Fast Retargeting with Dynamics Validation), a scalable framework consisting of rapid constrained kinematic retargeting and an additional dynamics validation pipeline. Its kinematic stage integrates a custom Sequential Quadratic Programming solver, Real-Time Iteration, and parallel chunk-based processing, achieving up to 9,156 frames per second, approximately up to 136 times faster than GMR and ProtoMotions, while robot-specific constraints are incorporated into the optimization to reduce common retargeting artifacts, such as ground penetration and self-collision. For motions requiring additional verification, a contact implicit iLQR controller is utilized to test the retargeted reference under full rigid body dynamics. This dynamics-based validation identifies dynamically infeasible motions and refines contact-related artifacts such as foot floating and foot skating. We evaluate retargeting quality by training motion tracking reinforcement learning policies using several state-of-the-art pipelines and comparing their tracking fidelity and success rates. Furthermore, sim-to-real transfer is demonstrated on a Unitree G1 humanoid. Videos and code are available at: https://daroslab.github.io/frdv/.

0.17

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.70
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39